1708002 LAPP (J)-Y(ST)Y...LG 2X2X0,8 BMK

proceeds

• The cable is marked with the phrase "Fire alarm cable" at regular intervals on the cover. Therefore, it is used especially for installation in fire alarm systems.
• Aluminum tape display and drain wire minimize high-frequency interference in electromagnetic fields
• Decoupling of electrical circuits by structure in twisted pairs (crosstalk effects)

Scope of use

• Signal transmissions
• For fixed or low gymp installation, in dry and wet interiors
• For outdoor use this cable should be installed only under a sydy

Product features

• The 2-pair version (2 x 2 x 0.8) is twisted into a star-square shaped
• Non-flame propagator, according to IEC 60332-1-2

Product composition

• Bare solid copper conductor
• Conductor insulation made of PVC
• Conductors braided in pairs,
  twisted pairs together,
  General aluminum tape display with copper drain wire
• Outer cover made of PVC
  Outer shell color: fire red (RAL 3000)

ETS Classification 5

• ETIM 5.0 Class-ID: EC000829
• ETIM Class 5.0 Description: Signal/Telecommunications Cable

ETTIM Rating 6

• ETIM 6.0 Class-ID: EC000829
• ETIM 6.0 Class-Description: Telecommunication cable

Driver Identification Code

• According to VDE 0815 (Appendix T10)

Coupling

• (800 Hz): K1: 80% ≤ 300 pF/100m

Driver cross section in

• 0.8 mm: 0.50 mm²

Cable attenuation / attenuation

• 0.8 mm: 1.1 dB/km

Minimum radius of curvature

• Fixed installation: 10 x outer diameter

Test voltage

• Driver/conductor: 800 V
• Driver/display: 800 V

Loop resistance

• max. 73.2 Ohm/km

Temperature range

• Occasional flexible use: –5°C to +50°C
• Fixed installation: -30°C to +70°C