2170996 LAPP UNITRONIC BUS PB FRNC FC

Benefits

• Cables can be used for PROFIBUS-DP as well as PROFIBUS-FMS and FIP
• For use where the combination of a halogen-free outer sheath with properties similar to PUR and enhanced flame-retardance is required
• Fast Connect (FC) cable design

Application range

• This cable provides special advantages for use in sensitive areas where fire propagation must be avoided and the presence of toxic fumes would cause personal injury and damage to equipment.

Product features

• Halogen-free
• Vertical Tray Flame Test according to UL 1685
• Oil-resistant
• Based on the bit rates listed, in accordance with PNO specifications the following maximum cable lengths for a bus segment apply
  (cable type A, PROFIBUS-DP):
  93.75 kbit/s = 1200 m
  187.5 kbit/s = 1000 m
  500 kbit/s = 400 m
  1.5 Mbit/s = 200 m
  12.0 Mbit/s = 100 m

Norm references / Approvals

• UL/CSA-certified

Product Make-up

• Solid and bare copper conductor
• Core insulation: PE
• Inner sheath, screening foil and braiding
• Outer sheath: PUR, violet (RAL 4001)

Classification ETIM 5

• ETIM 5.0 Class-ID: EC000830
• ETIM 5.0 Class-Description: Data cable

Classification ETIM 6

• ETIM 6.0 Class-ID: EC000830
• ETIM 6.0 Class-Description: Data cable

Certifications

• UL/CSA (CM)

Mutual capacitance

• Approx. 28.5 nF/km

Peak operating voltage

• (not for power applications) 250 V

Minimum bending radius

• 80 mm

Test voltage

• Core/core: 1500 V rms
• Core/screen: 1500 V

Characteristic impedance

• (3 - 20 MHz): 150 ± 15 Ohm

Temperature range

• -30°C to +80°C