LAPP 2170232 2170232 UNITRONIC BUS ASI (TPE) 2X1,5 RD - Image 1

Images are for illustrative purposes only. Please refer to data sheet for details.

2170232 UNITRONIC BUS ASI (TPE) 2X1,5 RD LAPP UNITRONIC BUS ASI (TPE) 2X1,5 RD

Reference: 2170232

Catalog Number: UNITRONIC BUS ASI (TPE) 2X1,5 RD

Manufacturer: LAPP

Description:

UNITRONIC BUS ASI (TPE) 2X1,5 RD
UNITRONIC

Categories:

  • Cables > Data and communication cable
  • LAPP > UNITRONIC BUS cabling

Brand new product in its original packaging covered by the warranties and certifications provided by LAPP

  • More Info
  • PDF
  • Reviews
Guarantee, repair and return.

Unit Price: 3,78 €/m

This price is per unit and is the net value (not including taxes if applicable).

Calculate price by quantity

QuantityPrice

Standard lead time: 1 week.

  • These delivery times are an estimate any may vary when the item order has been processed.

LAST VIEWED

MORE INFO

Communication at sensor/actuator level. Halogen free (rubber), UL-approval (PVC), oil resistant (TPE). Temperature range from -40°C bis +90°C

"LD” = Long Distance

Benefits

  • The new BUS ASI LD 2 x 2.5 (Long Distance) allows even modules located further away to be connected.
    AS-I power supplies can be reduced. The BUS ASI LD is downwards-compatible with version 1.5.
  • The rubber versions are halogen-free

Application range

  • Communication at sensor/actuator level
  • Sensor-/actuator wiring
  • For fixed installation as well as occasional flexing at free, non-continuously recurring movement without tensile load
  • The TPE version has an oil-resistant outer sheath. It is suitable for wet areas, in particular in conjunction with water-soluble cooling lubricants.

Product features

  • Data and power are transmitted via an unscreened, geometrically coded two-core flat cable (protection against polarity reversal).
  • The conductor is contacted by "piercing technology" within the ASI modules.
  • The sensors are connected to the ASI modules (coupling modules) using round cables (connection cables).

Norm references / Approvals

  • ASI is standardised Europe-wide in EN 50295 and internationally in IEC 62026-2.
  • PVC A version with UL/CSA (CMX) certification
  • UL/CSA version: CMG c(UL)us or (UL)CL2 or AWM 300V FT4 certified

Product Make-up

  • Conductor: fine-wire tinned-copper strands
  • Core insulation: blue and brown
  • Outer sheath:
    rubber (G), halogenfree
    thermoplastic elastomers (TPE)
    PVC
  • Outer sheath: yellow (RAL 1023), black (RAL 9005), red (RAL 3000)

Classification ETIM 5

  • ETIM 5.0 Class-ID: EC000830
  • ETIM 5.0 Class-Description: Data cable

Classification ETIM 6

  • ETIM 6.0 Class-ID: EC000830
  • ETIM 6.0 Class-Description: Data cable

Peak operating voltage

  • Yellow: 300 V (not for power applications)
    Black: 300 V (not for power applications)
    Red: 300 V

Conductor resistance

  • 1.5 mm²: max. 13.7 Ohm/km
  • 2.5 mm²: max. 8.21 Ohm/km

Minimum bending radius

  • Fixed installation: 12 mm
  • Flexible use 24 mm

Test voltage

  • Core/core: 2000 V

Temperature range

  • Dependent on outer sheath material:
    PVC: -30°C to +90°C
    Other materials: -40°C to +85°C
  • During installation:
    PVC -20 °C to +90 °C
    Other materials:
    -30 °C to +85 °C

DATASHEET - PDF

Latest Customer Reviews

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.