UFS Other - OBO BETTERMANN

Mounting lid 250-2/3 for GES4, 282x282x4, Strip-galvanised, DIN EN 10147, Steel, St

Mounting lid 250, nominal size 4. Mounting lid for underfloor junction and branch box of type UZD250-3/4 for the installation of an installation unit of nominal size 4. Installation opening 3 mm recessed for later blanking lock with lid blind plate.

Mounting lid 350-2/3 for R9, 383x383x4, Strip-galvanised, DIN EN 10147, Steel, St

Mounting cap DUG 350-3 R9,350-2/3 for R9 383x383x4 Steel, St,strip galvanized, DIN EN 10346

350-3 mounting cap for mounting units rated size R9. Adapter cover for junction and underfloor junction boxes type UZD350-3/4 for mounting a mounting unit of nominal size R9. Mounting opening at a depth of 3 mm to be able to close it later with a blind cover.

Service outlet for duct mounting, Iron grey, 7011, Polyamide, PA

Service outlet for universal mounting, Stainless steel, grade 304, VA, 1.4301

GES4M-2 service outlet with handle clamp. Service outlet with handle clamp for up to 6 individual Modul 45 devices in 2 UT3 universal supports, use in duct systems and system floors for indoor use.Locking ladder made of galvanised sheet steel. The floor covering thickness is set to 5 mm, adjustable to 10 mm if necessary. Service outlet with handle clamp, 2-compartment, for the installation of MT4 mounting support. Two type APMT2 cover plates can be installed.

Service outlet for universal mounting, Stainless steel, grade 304, VA, 1.4301

GES9M-2 10U mechanism holder set, for universal mounting 266x266x69 Stainless steel 1.4301, A2, 1.4301,

GES9M-2 mechanism holder set with handle. Mechanism holder unit with handle for up to 12 individual Modul 45 devices in 3 UT4 universal brackets, for use in ducting systems and indoor system floors. Galvanized steel plate lace ladder. The thickness of the floor covering is set to 5 mm and can be adjusted to 10 mm if necessary. Mechanism holder set with handle, 3 compartments, MT9 bucket. 3 APMT5 protective blank caps can be installed.

Junction box insert for universal mounting, Iron grey, 7011, Polyamide, PA

Lid enc. ZES4-2 U10T 7011 junction box, for universal assembly Polyamide, PA,

ZES4 manhole cover

Blanking cover for rectangular opening, Graphite black, 9011, Polyamide, PA

Blanking cover for Modul 45® installation opening. Blanking cover for closing off a square Modul 45 mounting opening in a mounting box cover plate.

Installation frame for 2f + 2f Modul 45, Graphite black, 9011, Polyamide, PA

MT45V 2+2 Frame, for 2f + 2f Modul 45 Polycarbonate/Acrylonitrile-butadiene-styrole, PC/ABS,

Installation frame for combination of 2x and 2x Modul 45® devices. For the installation of a combination of double and double Modul 45 sockets for System 55 service outlets with mounting support for vertical installation of Modul 45 devices. The installation frame is designed for use with 0° sockets for straight connectors (not angled connectors).

End cover for OKA-G and OKA-W, Strip-galvanised, DIN EN 10147, Steel, St

Trunking end piece, height 40−150 mm. Ready-to-mount trunking end piece, consisting of a flexible apron with side and floor covering guide profiles. The scope of delivery contains trunking connection brackets and a height-adjustable fixing bracket.

End cover for OKA-G and OKA-W, Strip-galvanised, DIN EN 10147, Steel, St

Trunking end piece, height 40−150 mm. Ready-to-mount trunking end piece, consisting of a flexible apron with side and floor covering guide profiles. The scope of delivery contains trunking connection brackets and a height-adjustable fixing bracket.

End cover for OKA-G and OKA-W, Strip-galvanised, DIN EN 10147, Steel, St

Trunking end piece, height 40−150 mm. Ready-to-mount trunking end piece, consisting of a flexible apron with side and floor covering guide profiles. The scope of delivery contains trunking connection brackets and a height-adjustable fixing bracket.

Flushfloor trunking unit blank, 2400x300x40, Strip-galvanised, DIN EN 10147, Steel, St

OKA-W3004030 flush pavement channel, blind 2400x300x40 Steel, St, strip galvanized, DIN EN 10346

Trunking unit, blank, height 40−70 mm. Ready-to-mount trunking unit with three blanking lids for cable laying, consisting of the trunking base (floor trough with side and floor covering contact profiles) and trunking lid. Floor trough with holding straps for self-contacting mounting of separating retainers. The scope of delivery contains 6 height-adjustable fixing brackets, 6 screed anchors and lid butt seals (3x for nominal trunking widths of 200 and 300) or height-adjustable lid butt supports: 3x for nominal trunking width 400 and 6x for nominal trunking widths 500 and 600. Trunking lid screwed on for delivery.

Flushfloor trunking unit blank, 2400x300x60, Strip-galvanised, DIN EN 10147, Steel, St

OKA-W3006050 pavement flush channel, blind 2400x300x60 Steel, St, galvanized in band, DIN EN 10346

Trunking unit, blank, height 60−110 mm. Ready-to-mount trunking unit with three blanking lids for cable laying, consisting of the trunking base (floor trough with side and floor covering contact profiles) and trunking lid. Floor trough with holding straps for self-contacting mounting of separating retainers. The scope of delivery contains 6 height-adjustable fixing brackets, 6 screed anchors and lid butt seals (3x for nominal trunking widths of 200 and 300) or height-adjustable lid butt supports: 3x for nominal trunking width 400 and 6x for nominal trunking widths 500 and 600. Trunking lid screwed on for delivery.

T and intersection fitting set for OKA-G and OKA-W, Die-cast zinc, Zn

Construction set for trunking T branch and intersection. For the construction-side creation of a trunking junction as a 90° angle, T-piece or crossing. A flushfloor end cover is also required for the creation of a 90° angle (order separately). Suitable for the OKA-G and OKA-W trunking systems.

Service outlet, complete with protective contact socket, Stainless steel, grade 304, VA, 1.4301

Floor box UDHOME9, two double VDE, stainless steel. Square floor box for use in dry-cleaned cavity and screed floors in indoor areas. Installation housing with pre-marked insertion openings for pipes (M25). With three UT4 universal supports and two double protective contact sockets. Cover adjustable to top edge of floor covering using four height-adjustment supports. The minimum installation depth is 95 mm, the height-adjustment range + 30 mm.Surfaces visible in the floor covering made of stainless steel.

Flush mounted housing for GES9-2, galvanized band, DIN EN 10147, Steel, St

Underfloor box for GES9. Square installation housing for one GES9-2 service outlet for use in screed floors for indoor use. With pre-marked insertion openings for pipelines (M25) on all four sides. In the as-delivered state, the installation housing is closed with a mounting protection lid. The minimum installation depth is 70 mm, the height-adjustment range +30 mm.

Suction lifter ,

Suction lifter, 80 N. Suction lifter for lifting out cassettes (blank or tube body variants) with inserted hard bases with a smooth surface. Support force 80 N.

Mounting lid 350-2/3 for R7, 383x383x4, Strip-galvanised, DIN EN 10147, Steel, St

Mounting cap DUG 350-3 R7,350-2/3 for R7 383x383x4 Steel, St,strip galvanized, DIN EN 10346

Mounting lid 350, nominal size R7. Mounting lid for underfloor junction and branch boxes of type UZD350-3/4 for the installation of an installation unit of nominal size R7. Installation opening 3 mm recessed as a later blanking lock with lid blanking plate.

Blanking lid for trunking system OKA2, 800x200x4, Strip-galvanised, DIN EN 10147, Steel, St

OKA D 200 blind cover, for OKA-G and OKA-W channel 800x200x4 Steel, St, strip galvanized, DIN EN 10346

Mounting lid, blank, 800 mm. For blank closing of a trunking unit. Lid fixing screws contained in scope of delivery.

Barrier strip for OKA2, Strip-galvanised, DIN EN 10147, Steel, St

OKA2 TW 30 partition wall, for OKA-W channel 2400x15x17 Steel, St, galvanized in band, DIN EN 10346

Separating retainer, trunking height 30 mm. Divider for use in the floor trough of previously prepared OKA-W trunking units.

Barrier strip for OKA2, Strip-galvanised, DIN EN 10147, Steel, St

OKA2 TW 50 partition wall, for OKA-W channel 2400x15x37 Steel, St, galvanized in band, DIN EN 10346

Separating retainer, trunking height 50 mm. Divider for use in the floor trough of the previously prepared OKA-W trunking unit.

Barrier strip for OKA2, Strip-galvanised, DIN EN 10147, Steel, St

OKA2 TW 70 partition wall, for OKA-W channel 2400x15x57 Steel, St, strip galvanized, DIN EN 10346

Separating retainer, trunking height 70 mm. Divider for use in the floor trough of the previously prepared OKA-W trunking unit.

Barrier strip for OKA2, Strip-galvanised, DIN EN 10147, Steel, St

OKA2 TW 90 partition wall, for OKA-W channel 2400x15x77 Steel, St, strip galvanized, DIN EN 10346

Separating retainer, trunking height 90 mm. Divider for use in the floor trough of the previously prepared OKA-W trunking unit.

Mounting lid for trunking system OKA2, 800x400x4, Strip-galvanised, DIN EN 10147, Steel, St

Mounting lid for GESR9, 800 mm. With mounting opening for the installation of an installation unit of nominal size 4. Mounting opening closed with blanking lid plate. Lid fixing screws contained in scope of delivery.

Mounting lid for trunking system OKA2, Strip-galvanised, DIN EN 10147, Steel, St

Lid - Mec holder set. OKA DG9 400, for OKA-G and OKA-W Steel, St, galvanized strip, DIN EN 10346

Mounting cover for GES9, 800 mm. With mounting opening for mechanism holder set of nominal size 9. Mounting opening closed with a blind plate. It comes with screws to fix the lid to the channel.

Flushfloor trunking unit blank, 2000x250x85, Steel, St

OKB supply trunking. Ready-to-mount trunking unit for cable routing, consisting of a trunking base with two covers. The scope of delivery contains two lid butt seals and one connector. For height adjustment, six height adjustment units are required. Load capacity up to a maximum of 5 kN. The trunking unit can be supplemented with an adjustable floor covering contact profile for screed limitation in areas of door frames and in front of radiator niches.

Flushfloor trunking unit with blanking lid, 2000x250x93, Strip-galvanised, DIN EN 10147, Steel, St

Trunking unit with blanking lid. Ready-to-mount trunking unit for cable routing and device installation, consisting of a trunking base with two blanking covers. The scope of delivery contains two lid butt seals and one connector. For height adjustment, six height adjustment units are required. Load capacity up to a maximum of 5 kN. The trunking unit can be supplemented with an adjustable floor covering contact profile for screed limitation in areas of door frames and in front of radiator niches.

Mounting box for OKB, Strip-galvanised, DIN EN 10147, Steel, St

Device support. System fastening for universal supports in the trunking base.

Levelling unit for cassette and OKB, M8x70mm, Electrogalvanised, DIN 50961, Steel, St

Height adjustment unit RKNEV2. For flushfloor height adjustment of the height adjustable cassette units and the OKB screed-flush trunking system. The VPE consists of 4 height adjustment units.

Levelling unit for cassette and OKB, M8x150mm, Electrogalvanised, DIN 50961, Steel, St

PCEad levelling RK NEV2 150 p. caps and frames and OKB M8x150mm Steel, St electro-galvanized, EN ISO 19598 / EN ISO 4042

RKNEV2 leveling unit. To adjust the height-adjustable cover and frame assemblies and the OKB channeling system flush with the floor to the height of the floor. The VPE consists of 4 leveling units.

Levelling unit for cassette and OKB, M8x230mm, Electrogalvanised, DIN 50961, Steel, St

Height adjustment unit RKNEV2. For flushfloor height adjustment of the height adjustable cassette units and the OKB screed-flush trunking system. The VPE consists of 4 height adjustment units.

Junction box insert for universal mounting, Iron grey, 7011, Polyamide, PA

ZESR4 inspection cover. Draw box insert for blanking locking of a square round mounting opening of nominal size R4 in trunking systems and system floors for indoor use.

Mounting plate for GE2 15 with 3x hole pattern Type A, 118x47x34, Stainless steel, grade 304, VA, 1.4301

Mounting support, 2 x type A. Mounting support to accept two data connection modules of the following types: AMP TYCO: Standard 110Connect, SL Series 110Connect and Toolless, AMP-Twist; Brand-Rex: unshielded; GG45; TKM RJ MOD; Nexans: LANmark with Adapter-Clip; Siemon CAT6; 3M K6 and K10.Dimensions of a mounting opening in mm: 20.10 x 14.80.

Mounting plate for GE2 17 with 2x hole pattern Type C, 118x47x34, Stainless steel, grade 304, VA, 1.4301

Mounting support, 2 x type C. Mounting support to accept two data connection modules of the following types: Brand-Rex: shielded; EKU: E-Stone; Dätwyler: KS-T, MS-K and KU-T module; R&M: Snap-In and Keystone; Rutenbeck: UM and UMflex; SETEC: MKJ, UKJ and XKJ; Siemon TERA; Telegärtner: AMJ and UMJ.Dimensions of a mounting opening in mm: 19.30 x 14.80.Suitable for GE2 / UDHome2 installation unit with floor covering recess.

Mounting plate for GE2F with 3x hole pattern Type A, Stainless steel, grade 304, VA, 1.4301

Mounting support, 2 x type A. Mounting support to accept two data connection modules of the following types: AMP TYCO: Standard 110Connect, SL Series 110Connect and Toolless, AMP-Twist; Brand-Rex: unshielded; GG45; TKM RJ MOD; Nexans: LANmark with Adapter-Clip; Siemon CAT6; 3M K6 and K10.Dimensions of a mounting opening in mm: 20.10 x 14.80.

Mounting plate for GE2F with 2x hole pattern Type C, Stainless steel, grade 304, VA, 1.4301

Mounting support, 2 x type C. Mounting support to accept two data connection modules of the following types: Brand-Rex: shielded; EKU: E-Stone; Dätwyler: KS-T, MS-K and KU-T module; R&M: Snap-In and Keystone; Rutenbeck: UM and UMflex; SETEC: MKJ, UKJ and XKJ; Siemon TERA; Telegärtner: AMJ and UMJ.Dimensions of a mounting opening in mm: 19.30 x 14.80.

Mounting plate with 2x hole pattern Type C, 116x36x34, Stainless steel, grade 304, VA, 1.4301

MTGE2 2C mounting bracket for 2x Type C connectors 116x36x34 Stainless steel 1.4301, A2, 1.4301

Mounting support, 2 x type C. Mounting support to accept two data connection modules of the following types: Brand-Rex: shielded; EKU: E-Stone; Dätwyler: KS-T, MS-K and KU-T module; R&M: Snap-In and Keystone; Rutenbeck: UM and UMflex; SETEC: MKJ, UKJ and XKJ; Siemon TERA; Telegärtner: AMJ and UMJ.Dimensions of a mounting opening in mm: 19.30 x 14.80.

Installation frame for 3 x 1 Modul 45, Graphite black, 9011, Polyamide, PA

Installation frame for three single Modul 45® devices. For the installation of 3 individual Modul 45 devices for System 55 service outlets with mounting support for vertical installation of Modul 45 devices.The installation frame is designed for use with 0° sockets (mounting direction turned through 90°, contact openings at top and bottom) and their use in conjunction with angled and straight connectors.

Barrier strip for Modul 45 mounting box, Graphite black, 9011, Polyamide, PA

Separating retainer for module support, vertical. To separate different current types in mounting supports for vertical installation of Modul 45 devices.

Mounting plate with 3x hole pattern Type A, 77x24x1,5, Stainless steel, grade 304, VA, 1.4301

Mounting plate 2 x data socket type A for System 55. Mounting plate to accept two connection sockets for data technology of the following types: AMP TYCO: Standard 110Connect, SL Series 110Connect and Toolless, AMP-Twist; Brand-Rex: unshielded module; GG45; TKM RJ MOD; Nexans: LANmark module with Adapter-Clip; Siemon CAT6; 3M K6 and K10.Dimensions of a mounting opening in mm: 20.10 x 14.80.

Mounting plate with 2x hole pattern Type C, 77x24x1,5, Stainless steel, grade 304, VA, 1.4301

Mounting plate 2 x data socket type C for System 55. Mounting plate to accept two connection sockets for data technology of the following types: Brand-Rex: shielded module; EKU: E-Stone module; Dätwyler: KS-T, MS-K and KU-T module; R&M: Snap-In and Keystone module; Rutenbeck: UM and UMflex module; SETEC: MKJ, UKJ and XKJ module; Siemon TERA; Telegärtner: AMJ and UMJ module.Dimensions of a mounting opening in mm: 19.30 x 14.80.

Heavy-duty cassette blank, 20 kN, 200x200mm, Stainless steel, grade 304, VA, 1.4301

Height-adjustable heavy-duty cassette, blank, RKRSL, nominal size R4, stainless steel. Round, "blank", heavy-duty cassette of nominal size R4 for the creation of an inspection opening in trunking systems, raised and cavity floors, in dry or wet-care floors for indoor use. Load class 2 to 20 kN. Only suitable for smooth floor coverings.Height-adjustable heavy-duty cassette as a blind cassette with a load bearing capacity of 2–20 kN, 2-compartment. 2 APMT2 cover plates can be installed. For the installation of 2 UT3 universal supports for 4 individual installation devices with support ring/support clamp or 6 Modul 45 devices for indoor use.

Heavy-duty cassette blank, 20 kN, ø 305mm, Stainless steel, grade 304, VA, 1.4301

Height-adjustable heavy-duty cassette, blank, RKRSL, nominal size R9, stainless steel. Round, "blank", heavy-duty cassette of nominal size R9 for the creation of an inspection opening in trunking systems, raised and cavity floors, in dry or wet-cleaned floors for indoor use. Load class 2 to 20 kN. Only suitable for smooth floor coverings.Height-adjustable heavy-duty cassette as a blind cassette with a load bearing capacity of 2–20 kN, 3-compartment. 3 APMT5 cover plates can be installed. For the installation of 3 UT4 universal supports for 9 individual installation devices with support ring/support clamp or 12 Modul 45 devices. Height-adjustable round heavy-duty cassette as blanking cassette to create an inspection opening. For the installation in trunking systems, raised and cavity floo

Square cassette with cord outlet, 200x200mm, Brass, CuZn

Height-adjustable cassette with cord outlet, RKSN, brass. Height-adjustable cassette of nominal size 4 with cord outlet for installation of accessories in dry-care floors for indoor use.Height-adjustable cassette for cord outlet, 2-compartment. 2 APMT2 cover plates can be installed. For the installation of 2 UT3 universal supports for 4 individual installation devices with support ring/support clamp or 6 Modul 45 devices.

Round cassette with cord outlet, Ø 215mm, Brass, CuZn

Height-adjustable cassette with cord outlet, RKSR, brass. Height-adjustable cassette of nominal size R4 with cord outlet for installation of accessories in dry-care floors for indoor use.Height-adjustable cassette for cord outlet, 2-compartment. 2 APMT2 cover plates can be installed. For the installation of 2 UT3 universal supports for 4 individual installation devices with support ring/support clamp or 6 Modul 45 devices.

Round cassette for tube, ø 215mm, Stainless steel, grade 304, VA, 1.4301

Height-adjustable cassette for tube body, RKFR, stainless steel. Height-adjustable cassette of nominal size R4 for tube body for installation of accessories in dry or wet-cleaned floors for indoor use.Height-adjustable cassette for tube body, 2-compartment. 2 APMT2 cover plates can be installed. For the installation of two UT3 universal supports for four single accessories with support ring/support clamp or six Modul 45 devices. The tube body is not contained in the scope of delivery.

Heavy-duty cassette for tube, 20 kN, ø 215mm, Stainless steel, grade 304, VA, 1.4301

Height-adjustable heavy-duty cassette for tube body RKFRSL, nominal size R4, stainless steel. Round heavy-duty cassette for tube body of nominal size R4 for the installation of accessories in trunking systems, raised and cavity floors, in dry or wet-cleaned floors indoors. Load class 2 to 20 kN.Height-adjustable heavy-duty cassette with tube body with a load bearing capacity of 2-20 kN, 2-compartment. 2 APMT2 cover plates can be installed. For the installation of two UT3 universal supports for four single accessories with support ring/support clamp or six Modul 45 devices. The tube body is not contained in the scope of delivery.

Junction and branch box for screed height 70¿125mm, 410x367x70, Strip-galvanised, DIN EN 10147, Steel, St

Derivation box. and reg. UZD 250-3, for height 70-125mm 410x367x70 Steel, St, strip galvanized, DIN EN 10346

Underfloor box empty for GESR9/55UV, 467x467x55, Strip-galvanised, DIN EN 10147, Steel, St

Underfloor box UGD350-3 for GESR9/55. Underfloor accessory box with mounting lid and lid blanking plate with sheet steel side walls. For the installation of a square GES9 55 service outlet in screed heights of 55 mm or more. Height can be infinitely adjusted to the nominal screed height and the screed can be worked flush to the screed scraping edge. With 7 x M20, 3 x M25, 4 x M32 pipe insertion openings on each side. Usable pipe size at a system height of 55 mm: M20.

Branch, left for OKA-G and OKA-W, Strip-galvanised, DIN EN 10147, Steel, St

Construction set for 90° angle to left, height 40−150 mm. For the construction-side creation of a trunking junction as a 90° angle, T-piece or crossing. A flushfloor end cover is also required for the creation of a 90° angle (order separately). Suitable for the OKA-G and OKA-W trunking systems.