PHOENIX CONTACT  VAL-CP-N/PE-350-ST 2859699 - Image 1

Images are for illustrative purposes only. Please refer to data sheet for details.

VAL-CP-N/PE-350-ST 2859699 PHOENIX CONTACT Type 2 surge protection plug

Reference: VAL-CP-N/PE-350-ST

Code: 2859699

Manufacturer: PHOENIX CONTACT

Description:

Type 2 surge protection plug
Replacement connector for VAL-CP surge arrester with N-PE arc arrester.

Categories:

  • PHOENIX CONTACT > Trabtech (TT)

Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX CONTACT

  • More Info
  • PDF
  • Reviews
Guarantee, repair and return.

* This article may be obsolete. Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

MORE INFO

Key Commercial Data

Orderkey2859699
Packing unit10 pc
NoteMade to Order (non-returnable)
Catalog pagePage 61 (C-6-2015)
GTIN4017918977627
Weight per Piece (excluding packing)40.600 g
Custom tariff number85363030
Country of originDE (Germany)

Dimensions

Height46.4 mm
Width11.7 mm
Depth56.4 mm
Horizontal pitch0.6 Div.

Ambient conditions

Degree of protectionIP20
Ambient temperature (operation)-40 °C ... 80 °C
Ambient temperature (storage/transport)-40 °C ... 80 °C
Altitude≤ 2000 m (amsl (above mean sea level))
Permissible humidity (operation)5 % ... 95 %
Shock (operation)30g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z)
Vibration (operation)5g (10 ... 500 Hz / 2.5 h / X, Y, Z)

General

IEC test classificationII
T2
EN typeT2
IEC power supply systemTN
TT
Mode of protectionN-PE
Mounting typeon base element
Colorgray/blue
Housing materialPBT-FR
Degree of pollution2
Flammability rating according to UL 94V-0
TypeDIN rail module, two-section, divisible
Number of positions1
Surge protection fault messageoptical

Protective circuit

Nominal voltage UN240 V AC (TN - only N-PE)
240 V AC (TT - only N-PE)
Nominal frequency fN50 Hz (60 Hz)
Maximum continuous voltage UC(N-PE)264 V AC
Residual current IPE≤ 1 µA
Nominal discharge current In(8/20) µs (N-PE)20 kA
Maximum discharge current Imax(8/20) µs (N-PE)40 kA
Follow current interrupt rating Ifi(N-PE)100 A (264 V AC)
Voltage protection level Up(N-PE)≤ 1.5 kV
Residual voltage Ures(N-PE)≤ 0.5 kV (at In)
≤ 0.5 kV (at 10 kA)
≤ 0.5 kV (at 5 kA)
≤ 0.5 kV (at 4 kA)
≤ 0.5 kV (at 2 kA)
TOV behavior at UT(N-PE)1200 V AC (200 ms / withstand mode)
Response time tA(N-PE)≤ 100 ns

UL specifications

SPD Type4CA
Maximum continuous operating voltage MCOV (N-G)264 V AC
Mode of protectionN-G
Power distribution systemSingle phase
Nominal frequency50/60 Hz
Measured limiting voltage MLV (N-G)950 V
Nominal discharge current In(N-G)20 kA

Classifications

Latest Customer Reviews

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.