5/5 .
— CHE 5/6/26, 10:33 AM
Customer rating:
Product:MTZ18-4VM DANFOSS REFRIGERATION Reciproc...
Images are for illustrative purposes only. Please refer to data sheet for details.
PT 2X2-12AC-ST 2838270 PHOENIX CONTACT Surge protection plug for the base element, for two floating double w..
Reference: PT 2X2-12AC-ST
Code: 2838270
Manufacturer: PHOENIX CONTACT
Description:
Surge protection plug for the base element, for two floating double wires, common mode voltage coarse protection to ground. 12 V AC nominal voltage. HART-compatible.
Categories:
- PHOENIX CONTACT > Trabtech (TT)
Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX CONTACT
- More Info
- Reviews
* This article may be obsolete. Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.
Go to successor article:PT 2X2-24DC-ST2838228
Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.
LAST VIEWED
MORE INFO
Dimensions
| Height | 45 mm |
|---|---|
| Width | 17.7 mm |
| Depth | 52 mm |
| Horizontal pitch | 1 Div. |
| Complete module height | 90 mm |
| Complete module width | 17.7 mm |
| Complete module depth | 65.5 mm |
Ambient conditions
| Ambient temperature (operation) | -40 °C ... 85 °C |
|---|---|
| Degree of protection | IP20 |
General
| Housing material | PA 6.6 |
|---|---|
| Flammability rating according to UL 94 | V0 |
| Color | black |
| Standards for cearances and creepage distances | VDE 0110-1 |
| IEC 60664-1 | |
| Mounting type | On base element |
| Type | DIN rail module, two-section, divisible |
| Direction of action | Line-Line & Line-Signal Ground/Shield & optional Signal Ground/Shield-Earth Ground |
| Arrester can be tested with CHECKMASTER from software version: | From SW rev. 1.00 |
Protective circuit
| IEC test classification | C1 |
|---|---|
| C2 | |
| C3 | |
| D1 | |
| VDE requirement class | D1 |
| Nominal voltage UN | 12 V AC |
| Maximum continuous voltage UC | 18 V DC |
| 13 V AC | |
| Maximum continuous voltage UC(wire-wire) | 18 V DC |
| 13 V AC | |
| Maximum continuous voltage UC(wire-ground) | 18 V DC |
| 13 V AC | |
| Nominal current IN | 450 mA (45°C) |
| Operating effective current ICat UC | ≤ 5 µA |
| Residual current IPE | ≤ 1 µA (BE: 2x2-F) |
| ≤ 4 µA | |
| Nominal discharge current In(8/20) µs (Core-Core) | 10 kA |
| Nominal discharge current In(8/20) µs (Core-Earth) | 10 kA |
| Total surge current (8/20) µs | 20 kA |
| Max. discharge current Imax(8/20) µs maximum (Core-Core) | 10 kA |
| Max. discharge current Imax(8/20) µs maximum (Core-Earth) | 10 kA |
| Nominal pulse current Ian (10/1000) µs (Core-Core) | 49 A |
| Impulse discharge current (10/350)˽µs, peak value limp | 2.5 kA (per path) |
| Output voltage limitation at 1 kV/µs (Core-Core) spike | ≤ 25 V |
| Output voltage limitation at 1 kV/µs (Core-Earth) spike | ≤ 450 V |
| Output voltage limitation at 1 kV/µs (Core-Core) static | ≤ 25 V |
| Residual voltage at In(conductor-conductor) | ≤ 25 V |
| Voltage protection level Up(core-core) | ≤ 55 V |
| Voltage protection level Up(core-ground) | ≤ 450 V |
| Response time tA (Core-Core) | ≤ 1 ns |
| Response time tA (Core-Earth) | ≤ 100 ns |
| Input attenuation aE, sym. | typ. 0.5 dB (≤ 700 kHz) |
| Cut-off frequency fg (3 dB), sym. in 50 Ohm system | typ. 4 MHz |
| Capacity (Core-Core) | 2.5 nF |
| Resistance in series | 2.2 Ω (Path 1-2/5-6) |
| 2.2 Ω (Path 7-8, 11-12) | |
| Surge protection fault message | None |
| Max. required back-up fuse | 500 mA (e.g. T ( IEC 127-2/III)) |
| Impulse durability (conductor-conductor) | C2 - 10 kV/5 kA |
| Impulse durability (conductor-ground) | C2 - 10 kV/5 kA |
| D1 - 2,5 kA |
Connection data
| Connection method | Screw connection (in connection with the base element) |
|---|---|
| Connection type IN | PLUGTRAB plug-in system |
| Connection type OUT | PLUGTRAB plug-in system |
| Screw thread | M3 |
| Tightening torque | 0.8 Nm |
| Stripping length | 8 mm |
| Conductor cross section flexible min. | 0.2 mm² |
| Conductor cross section flexible max. | 2.5 mm² |
| Conductor cross section solid min. | 0.2 mm² |
| Conductor cross section solid max. | 4 mm² |
| Conductor cross section AWG min. | 24 |
| Conductor cross section AWG max. | 12 |
Standards and Regulations
| Standards/regulations | IEC 61643-21 |
|---|---|
| DIN EN 61643-21 | |
| UL 497B |
DATASHEET - PDF
Title
Size
Type
128 Kbytes
27 Mbytes
Latest Customer Reviews
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.
5/5 merci beaucoup
— sotitradim 11/29/25, 11:12 AM
Customer rating:
Product:SL20,MNM,IP42,300lm,1H SL2MNM42H1C EATON...
4/5 a,azing to use it
— B rahul 10/4/25, 8:05 AM
Customer rating:
Product:661601 LEGRAND URA21LED 70LM 1H IP42 NP
4/5 Amazing to use it
— B rahul 10/4/25, 8:04 AM
Customer rating:
Product:661601 LEGRAND URA21LED 70LM 1H IP42 NP