3RF2030-1BA04-0WF0 SIEMENS SOLID-STATE RELAY 3RF2, 1-PHASE WIDTH 45MM, 30A 48-460V / 24V DC SCREW CONNECTIO..

3RF2030-1BA04-0WF0

SIEMENS

Semiconductor relay, 1-phase 3RF2 Overall width 45 mm, 30 A 48-460 V / 24 V DC screw terminal Instantaneous switching with heat conducting foil

More details


CONTROL AND CONTACTORS > Contactors for switching motors

Brand new product in its original packaging covered by the warranties and certifications provided by SIEMENS

* This article may be obsolete. Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

If our price is not the best, please ask us for a quote. Ask for a quotation

Best sellers

More info



General technical data:
product brand nameSIRIUS
Product designationsolid-state relay
Product functioninstantaneous switching
Number of poles for main current circuit1
Protection class IPIP20
Ambient temperature
● during operation°C-25 ... +60
● during storage°C-55 ... +80
Installation altitude at height above sea level maximumm1 000
Vibration resistance acc. to IEC 60068-2-62g
Shock resistance acc. to IEC 60068-2-2715g / 11 ms
Equipment marking acc. to DIN 40719 extended according to IEC 204-2 acc. to IEC 750K
Equipment marking acc. to DIN EN 61346-2Q
Number of NC contacts for auxiliary contacts0
Number of NO contacts for auxiliary contacts0
Number of CO contacts for auxiliary contacts0
Main circuit:
Number of NO contacts for main contacts1
Number of NC contacts for main contacts0
Operating current
● rated value maximumA30
● at AC-51 rated valueA30
● minimummA500
Operating voltage at AC
● at 50 Hz rated valueV48 ... 460
● at 60 Hz rated valueV48 ... 460
Operating range relative to the operating voltage at AC
● at 50 HzV40 ... 506
● at 60 HzV40 ... 506
Operating frequency rated valueHz50 ... 60
Relative symmetrical tolerance of the operating frequency%10
Insulation voltage rated valueV600
Rate of voltage rise at the thyristor for main contacts maximum permissibleV/µs500
Blocking voltage at the thyristor for main contacts maximum permissibleV1 200
Reverse current of the thyristormA10
Derating temperature°C40
Power loss [W] total typicalW44.2
Surge current resistance rated valueA300
I2t value maximumA²·s450
Short-circuit protection, design of the fuse link
Control circuit/ Control:
Type of voltage of the control supply voltageDC
Control supply voltage 1
● at DC
— Initial rated valueV15
— Final rated valueV24
Control supply voltage
● at DC Full-scale value for signal<0> recognitionV5
Relative symmetrical tolerance of the supply voltage frequency%10
Control current
● at minimum control supply voltage
— at DCmA2
● at DC rated valuemA15
Installation/ mounting/ dimensions:
Mounting typescrew fixing
Mounting type Side-by-side mountingYes
Design of the thread of the screw for securing the equipmentM4
Tightening torque of the screw for securing the equipmentN·m1.5
Widthmm45
Heightmm58
Depthmm48
Connections/Terminals:
Type of electrical connection for main current circuitscrew-type terminals
Design of the thread of the connection screw for main contactsM4
Tightening torque for main contacts with screw-type terminals
● minimumN·m2
● maximumN·m2.5
Tightening torque [lbf·in] for main contacts with screw-type terminals
● minimumlbf·in7
● maximumlbf·in10.3
Type of connectable conductor cross-sections
● for main contacts
— solid2x (1.5 ... 2.5 mm²), 2x (2.5 ... 6 mm²)
— finely stranded
— with core end processing2x (1 ... 2.5 mm²), 2x (2.5 ... 6 mm²), 1x 10 mm²
● at AWG conductors
— for main contacts2x (14 ... 10)
— for auxiliary and control contacts1x (AWG 20 ... 12)
● for auxiliary and control contacts
— solid1x (0.5 ... 2.5 mm²), 2x (0.5 ... 1.0 mm²)
— finely stranded
— with core end processing1x (0.5 ... 2.5 mm²), 2x (0.5 ... 1.0 mm²)
— without core end processing1x (0.5 ... 2.5 mm²), 2x (0.5 ... 1.0 mm²)
Connectable conductor cross-section
● for main contacts
— single or multi-strandedmm²1.5 ... 6
— finely stranded
— with core end processingmm²1 ... 10
● for auxiliary and control contacts
— solidmm²0.5 ... 2.5
— finely stranded
— with core end processingmm²0.5 ... 2.5
— without core end processingmm²0.5 ... 2.5
AWG number as coded connectable conductor cross section
● for main contacts14 ... 10
● for auxiliary and control contacts20 ... 12
Type of electrical connection for auxiliary and control current circuitscrew-type terminals
Design of the thread of the connection screw of the auxiliary and control contactsM3
Wire stripping length of the cable
● for main contactsmm10
● for auxiliary and control contactsmm7
Tightening torque for auxiliary and control contacts with screw-type terminalsN·m0.5 ... 0.6
Tightening torque [lbf·in] for auxiliary and control contacts with screw-type terminalslbf·in4.5 ... 5.3

Datasheet - PDF

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.