VC-SD2 1853683 PHOENIX CONTACT Protective covers View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

VC-SD2 1853683 PHOENIX CONTACT Protective covers

VC-SD2

1853683

PHOENIX_CONTACT

5

Product on demand only, returns will not be accepted.

Protective covers

Protective cover, Article family: VARIOCON, construction: VC2, housing material: PA 6, color: gray

Protective cover, Range of articles: VARIOCON, design: VC2, housing material: PA 6, color: gray

More details


Connectors > Accessories/spare parts for industrial connectors

Field Device Connectors (FDC)

Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT

Total: $16.07
Unit price: $3.21
This price is per unit and is the net value (not including taxes if applicable).

If our price is not the best, please ask us for a quote. Ask for a quotation

Related products

Best sellers

More info



Technical data

Notes
Safety note
Safety noteWARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
• WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
• WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
• The products are suitable for applications in plant, controller, and electrical device engineering.
• When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
• Assembled products may not be manipulated or improperly opened.
• Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
• When using the product in direct connection with third-party manufacturers, the user is responsible.
• For operating voltages > 50 V AC, conductive connector housings must be grounded
• Ensure that the protective or functional ground has been properly connected.
• VDE 0100/1.97 § 411.1.3.2 and DIN EN 60 204/11.98 § 14.1.3 are applicable when combining several circuits in a cable and/or connector
• Observe the corresponding technical data. You will find information:
o On the product
o On the packing label
o In the supplied documentation
o Online at phoenixcontact.com/products under the product
• Only use tools recommended by Phoenix Contact
• The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product.
• Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory section of the product at phoenixcontact.com/products
• Operate the connector only when it is fully plugged in.
• Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
• Observe the minimum bending radius of the cable. Lay the cable without twisting it.
• The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12).

Product properties
Product typeProtective cover
Product familyVARIOCON
TypeVC2
Typefor panel mounting frames
Seal presentno
Data management status
Article revision03

Dimensions
Dimensional drawinglwxppztqqf.jpg
Width31 mm
Height10.6 mm
Length71.5 mm

Material specifications
Colorgray
Color of the housing partgray
MaterialPA
Flammability rating according to UL 94V0
Housing materialPA 6
Material, protective coverPA

Mechanical properties
Mechanical data
Locking typeScrew

Environmental and real-life conditions
Ambient conditions
Degree of protectionIP40
IP40
Ambient temperature (operation)-40 °C ... 80 °C

Mounting
Mounting typeClip locking

ETIM for 1853683 Connectors (EC002314)
Feature Name Feature Value
Type of locking (EF000208) Other
With sealing (EF005610) No
With captivity element (EF012222) No
Inflammability class of insulation material according to UL94 (EF002521) V0
Ambient temperature (EF002386) 80 °C
Degree of protection (IP), mounted (EF007466) IP40

Datasheet - PDF

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.