No products
Product successfully added to your shopping cart
View larger
FL SFP FX 2891081 PHOENIX CONTACT Media module
FL SFP FX
2891081
PHOENIX_CONTACT
Media module
With the slim Form Factor connector module you have a fiber optic interface with 100 MBit/s data transmission rate at a wavelength of 1310 nm (long).
The small form-factor plug-in module provides a fiber optic interface with a data transmission speed of 100 Mbps with a wavelength of 1310 nm (long).
Data and telecommunication > Interface converter
I/O
Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
Related products
▲Best sellers
▲More info
▲| Width | 13.7 mm |
| Height | 8.95 mm |
| Length | 56.5 mm |
| Note on application | |
| Note on application | Only for industrial use |
| Housing material | Metal |
| Mounting type | Insert in SFP slot |
| Ethernet FO | |
| Connection method | 1 LC socket at the SFP module, 100 Mbps |
| Transmission speed | 100 Mbps |
| Transmit capacity, minimum | -19 dBm |
| Transmit capacity, maximum | -12 dBm |
| Minimum receiver sensitivity | -30 dBm |
| Maximum receiver sensitivity | -3 dBm |
| Transmission physics | multi-mode fiberglass |
| Wavelength | 1310 nm |
| Signal LEDs | depending on the Factoryline device |
| No. of channels | 1 (LC multi-mode) |
| Product type | SFP module |
| Type | Factoryline devices with SFP slot |
| MTTF | 372 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day)) |
| Format | SFP (Small Form-factor Pluggable) |
| Data management status | |
| Article revision | 02 |
| Status display | via a Factoryline device |
| Maximum power dissipation for nominal condition | 0.66 W (when installed) |
| Transmission medium | Multi-mode fiberglass |
| Supply | |
| Supply voltage | 3.3 V (via Factoryline switch) |
| Power supply connection | via SFP slot |
| Connection method | To insert in SFP slot |
| Ambient conditions | |
| Degree of protection | IP20 |
| Ambient temperature (operation) | -40 °C ... 85 °C (non-condensing) |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C (non-condensing) |
| Permissible humidity (operation) | 30 % ... 95 % (non-condensing) |
| Permissible humidity (storage/transport) | 30 % ... 95 % (non-condensing) |
| Vibration (operation) | in acc. with IEC 60068-2-6: 5g, 150 Hz |
| Air pressure (operation) | 86 kPa ... 108 kPa (1500 m above sea level) |
| Air pressure (storage/transport) | 66 kPa ... 108 kPa (3500 m above sea level) |
| Standard designation | Ambient conditions |
| Standards/specifications | IEC 61850-3 |
Datasheet - PDF
▲| Title: | Size: | Type: |
|---|---|---|
| PDF CATALOG PHOENIX AUTOMATION EN.pdf | 35 Mbytes |
|
| PHOENIX CONTACT-2891081-FL SFP FX | 96 Kbytes |
|
Reviews (0) ▲
No customer reviews for the moment.
| Rating: |
|
| Name: | |
| Email: | |
| Subject: | |
| Text: | |
| Do you recommend this product to buy? | |
|
|
|
| Add review | |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.