No products
Product successfully added to your shopping cart
View larger
IB IL 400 MLR 1-8A 2727365 PHOENIX CONTACT Inline terminal
IB IL 400 MLR 1-8A
2727365
PHOENIX_CONTACT
Inline terminal
Inline power terminals, electromechanical direct start controller, up to 3.7 kW / 400 V AC
Inline power-level terminal blocks, electronic direct starter, up to 3.7 kW / 400 V AC
I/O
Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
Best sellers
▲More info
▲| Dimensional drawing |  |
| Width | 63 mm |
| Height | 224 mm |
| Depth | 109 mm |
| Inline local bus | |
| Number of interfaces | 2 |
| Connection method | Inline data jumper |
| Transmission speed | 500 kbps |
| Transmission physics | Copper |
| Module | |
| ID code (dec.) | 191 |
| ID code (hex) | BF |
| Length code (hex) | 81 |
| Length code (dec) | 129 |
| Process data channel | 8 bit |
| Input address area | 1 Byte |
| Output address area | 1 Byte |
| Register length | 1 Byte |
| Required parameter data | 5 Byte |
| Required configuration data | 5 Byte |
| Digital: Digital inputs | |
| Number of inputs | 1 |
| Number of positions | 4 |
| Filter time | 0.2 ms |
| Product type | I/O component |
| Product family | Inline |
| Type | modular |
| Mounting position | Panel mounting on horizontal DIN rail |
| Operating mode | Process data mode with one byte |
| Diagnostics messages | Overcurrent Error message in the diagnostic code (bus) and display via the LED ERR on the module |
| Output stage cannot be controlled Error message in the diagnostic code (bus) and display via the LED ERR on the module | |
| Module error during self test Message to the master |
| Potentials | |
| Power consumption | max. 4.2 W (entire device) |
| Potentials: Communications power (UL) | |
| Supply voltage | 7.5 V DC (via voltage jumper) |
| Current draw | max. 50 mA |
| Power consumption | max. 0.375 W |
| Potentials: Segment circuit supply (US) | |
| Supply voltage | 24 V DC (via voltage jumper) |
| Supply voltage range | 19.2 V DC ... 28.8 V DC (including all tolerances, including ripple) |
| Current draw | max. 160 mA |
| Electrical isolation/isolation of the voltage ranges | |
| Test voltage: Supply voltage UL/ 400 V level | 1.2 kV AC, 50 Hz, 1 min. |
| Test voltage: Supply voltage US/ 400 V level | 1.2 kV AC, 50 Hz, 1 min. |
| Test voltage: Supply voltage US/ brake control switch | 1.2 kV AC, 50 Hz, 1 min. |
| Test voltage: Supply voltage UL/ brake control switch | 1.2 kV AC, 50 Hz, 1 min. |
| Test voltage: Local bus/400 V level | 1.2 kV AC, 50 Hz, 1 min. |
| Test voltage: Local bus/Brake control switch | 1.2 kV AC, 50 Hz, 1 min. |
| Ambient conditions | |
| Degree of protection | IP20 |
| Ambient temperature (operation) | -25 °C ... 55 °C |
| Note | Notes on operation Line protection for the network supply line, max. 20 A. Observe derating of the POWER-COMBICON connector |
| Air pressure (operation) | 80 kPa ... 106 kPa (up to 2000 m above sea level) |
| Air pressure (storage/transport) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| Ambient temperature (storage/transport) | -25 °C ... 85 °C |
| Permissible humidity (operation) | 10 % ... 85 % (non-condensing) |
| Permissible humidity (storage/transport) | 10 % ... 85 % (non-condensing) |
| Protection class | I (IEC 61140, EN 61140, VDE 0140-1) |
| Mounting type | DIN rail mounting |
| Assembly note | To safeguard sufficient ventilation, ensure that there is an installation clearance of a minimum of 50 cm both above and below. |
| Mounting position | Panel mounting on horizontal DIN rail |
Datasheet - PDF
▲| Title: | Size: | Type: |
|---|---|---|
| PDF CATALOG PHOENIX AUTOMATION EN.pdf | 35 Mbytes |
|
| PHOENIX CONTACT-2727365-IB IL 400 MLR 1-8A | 154 Kbytes |
|
Reviews (0) ▲
No customer reviews for the moment.
| Rating: |
|
| Name: | |
| Email: | |
| Subject: | |
| Text: | |
| Do you recommend this product to buy? | |
|
|
|
| Add review | |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.