TC CLOUD CLIENT 1002-4G VZW 2702887 PHOENIX CONTACT Router View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

TC CLOUD CLIENT 1002-4G VZW 2702887 PHOENIX CONTACT Router

TC CLOUD CLIENT 1002-4G VZW

2702887

PHOENIX_CONTACT

Router

Industrial VPN Gateway for mGuard Secure Cloud, IPsec Communication over 4G (LTE), Verizon Wireless (US), 2-Port Switch, 1 Digital Input, 1 Digital Output

More details


Safety

Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT

* This article may be obsolete. Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

If our price is not the best, please ask us for a quote. Ask for a quotation

Best sellers

More info



Technical data

Notes
Utilization restriction
CCCex noteUse in potentially explosive areas is not permitted in China.

Product properties
Product typeRemote maintenance gateway
ApplicationEthernet
MTTF383 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
184 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%)
78 Years (SN 29500 standard, temperature 40°C, operating cycle 100%)
Data management status
Article revision02
Insulation characteristics
Pollution degree2

Electrical properties
Electrical isolationVCC // LTE // Ethernet // PE
Mains typeCellular communication
Supply
Supply voltage range10 V DC ... 30 V DC (SELV)
Typical current consumption< 200 mA (24 V DC)
65 mA (With activated energy-saving mode)
Function
ManagementWeb-based management, SNMP

Input data
Digital
Description of the inputDigital input
Number of inputs1
Voltage input signal10 V DC ... 30 V DC
Switching level "1" signal10 V DC ... 30 V DC

Output data
Signal
Output nameDigital output
Number of outputs1
Voltage output signal10 V DC ... 30 V DC (depending on the operating voltage)
Current output signal≤ 50 mA (Not short-circuit proof)

Connection data
Supply
Single conductor/terminal point, rigid0.14 mm² ... 1.5 mm²
Single-wire/terminal point, flexible0.14 mm² ... 1.5 mm²
Conductor cross section AWG26 ... 16

Interfaces
Web serveryes
Data: Ethernet interface, 10/100Base-T(X) in accordance with IEEE 802.3
Serial transmission speed10/100 Mbps, auto negotiation
Connection methodRJ45 jack, shielded
No. of channels2 (SELV)
Transmission length100 m (shielded twisted pair)
Protocols supportedTCP/IP, UDP/IP, FTP, HTTP
Auxiliary protocolsARP, DHCP, PING (ICMP), SNMP V1, SMTP
Wireless
Interface descriptionLTE (FDD)
Frequency range700 MHz (LTE B13)
1700 MHz (LTE B4)
Data rate≤ 150 Mbps (LTE, DL)
≤ 50 Mbps (LTE, UL)
Antenna50 Ω impedance SMA antenna socket
Antenna connection methodSMA (female)
SIM Interface1.8 volt, 3 volt
LTECAT4
Country supportUSA

Dimensions
Width45 mm
Height130 mm
Depth126 mm

Material specifications
Color (Upper housing part)gray (RAL 7042)
Material (Housing)Plastic

Environmental and real-life conditions
Ambient conditions
Degree of protectionIP20 (Manufacturer's declaration)
Ambient temperature (operation)0 °C ... 60 °C
Ambient temperature (storage/transport)0 °C ... 60 °C
Permissible humidity (operation)10 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)10 % ... 95 % (non-condensing)

Approvals
UL, USA/Canada
IdentificationClass I, Zone 2, AEx nA IIC T4 / Ex nA IIC T4 Gc
Class I, Div. 2, Groups A, B, C, D T4
Corrosive gas test
IdentificationISA-S71.04-1985 G3 Harsh Group A
Wireless approval USA, FCC
CertificateN7NHL7518

EMC data
Electromagnetic compatibilityConformance with EMC Directive 2014/30/EU
Noise immunityEN 61000-6-2
Electrostatic discharge
Standards/regulationsEN 61000-4-2
Electrostatic discharge
Contact discharge± 6 kV (Test Level 3)
Discharge in air± 8 kV (Test Level 3)
CommentsCriterion B
Electromagnetic HF field
Standards/regulationsEN 61000-4-3
Electromagnetic HF field
Frequency range80 MHz ... 3 GHz (Test Level 3)
Field intensity10 V/m
CommentsCriterion A
Fast transients (burst)
Standards/regulationsEN 61000-4-4
Fast transients (burst)
Input± 2 kV (Test Level 3)
Signal± 2 kV (Ethernet)
CommentsCriterion B
Surge current load (surge)
Standards/regulationsEN 61000-4-5
Surge current load (surge)
Input± 0.5 kV (symmetrical)
± 1 kV (asymmetrical)
Signal± 1 kV (Data line, asymmetrical)
CommentsCriterion B
Conducted interference
Standards/regulationsEN 61000-4-6
Conducted interference
Frequency range0.15 MHz ... 80 MHz
CommentsCriterion A
Voltage10 V
Emitted interference
Radio interference voltage in acc. with EN 55011Class B, area of application: Industry and residential
Emitted radio interference in acc. with EN 55011Class B, area of application: Industry and residential
Criteria
Criterion ANormal operating behavior within the specified limits.
Criterion BTemporary impairment to operational behavior that is corrected by the device itself.

Mounting
Mounting typeDIN rail mounting

Datasheet - PDF

Title: Size: Type:
PDF CATALOGUE AUTOMATION PHOENIX EN.pdf 35 Mbytes

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.