FLK 50/EZ-DR/D37SUB/ 50/Y81P-O 2302599 PHOENIX CONTACT Cable View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

FLK 50/EZ-DR/D37SUB/ 50/Y81P-O 2302599 PHOENIX CONTACT Cable

FLK 50/EZ-DR/D37SUB/ 50/Y81P-O

2302599

PHOENIX_CONTACT

Cable

Ready-made round cable; control: Mitsubishi Electric MELSEC Q (Y81P); Connection 1: Female connection D-SUB (1x 37-poles); Connection 2: Female IDC/FLK connection (1x 50-poles); Cable length: 0.5 m

Round cable set; controller: Mitsubishi Electric MELSEC Q (Y81P); connection 1: D-SUB socket strip (1x 37-position); connection 2: IDC/FLK socket strip (1x 50-position); cable length: 0.5 m

More details


INTERFACE Components (IF)

Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT

* This article may be obsolete. Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

If our price is not the best, please ask us for a quote. Ask for a quotation

Best sellers

More info



Technical data

Product properties
Product typeSystem cable
Data management status
Article revision05

Environmental and real-life conditions
Ambient conditions
Degree of protectionIP00
Degree of protection (Installation location)≥ IP54 (Installation location)
Ambient temperature (operation)-40 °C ... 70 °C (fixed installation)
-10 °C ... 70 °C (flexible installation)
Ambient temperature (storage/transport)-40 °C ... 80 °C
Altitude≤ 2000 m

Electrical properties
Operating voltage (AC)≤ 30 V AC
Operating voltage (DC)≤ 60 V DC
Nominal operating mode100% operating factor
Current (Per path, 50°C)≤ 1 A (Uncoiled, see derating)
Current (Per path, 70°C)≤ 0.6 A (Uncoiled, see derating)
Supported controller MITSUBISHI MELSEC Q
Suitable I/O cardQY81P

Cable/line
Cable length0.5 m
50X0.14 [PVC]
UL AWM Style2464/1061
Number of positions50
Shieldedno
Cable type50X0.14 [PVC]
Conductor typeRound cable set
Conductor structure signal line7x 0.16 mm
AWG signal line26
Conductor cross section50x 0.14 mm²
Wire diameter incl. insulation1 mm ±0.03 mm
External cable diameter10.30 mm ±0.4 mm
Outer sheath, materialSemi-rigid PVC
External sheath, colorgray
Conductor materialTin-plated Cu litz wires
Cable resistance≤ 145 Ω/km (20 °C)
Insulation resistance≥ 20 MΩ*km (20 °C)
Smallest bending radius, fixed installation86 mm
Smallest bending radius, movable installation161 mm
Dynamic load capacity (bending)Max. bending cycles: 5000 (at a radius of ≥ 15x outside diameter)
Halogen-freeno
Flame resistanceIEC 60332-1-2 (raw cable)
VDE 0842, Part 332-1-2 (raw cable)
IEC 60332-3-22 (raw cable)
UL VW-1
CSA FT-1
Resistance to oilcan withstand occasional splashes (raw cable)
Cable typeCable for one module
Color code
blackD-SUB37 (17) = IDC/FLK50 (1)
brownD-SUB37 (18) = IDC/FLK50 (2)
redD-SUB37 (1) = IDC/FLK50 (3)
orangeD-SUB37 (20) = IDC/FLK50 (4)
yellowD-SUB37 (2) = IDC/FLK50 (5)
greenD-SUB37 (21) = IDC/FLK50 (6)
blueD-SUB37 (3) = IDC/FLK50 (7)
violetD-SUB37 (22) = IDC/FLK50 (8)
grayD-SUB37 (4) = IDC/FLK50 (9)
whiteD-SUB37 (23) = IDC/FLK50 (10)
white-blackD-SUB37 (19) = IDC/FLK50 (11)
white-brownD-SUB37 (37) = IDC/FLK50 (12)
white-redD-SUB37 (17) = IDC/FLK50 (13)
white-orangeD-SUB37 (18) = IDC/FLK50 (14)
white-yellowD-SUB37 (5) = IDC/FLK50 (15)
white-greenD-SUB37 (24) = IDC/FLK50 (16)
white-blueD-SUB37 (6) = IDC/FLK50 (17)
white-violetD-SUB37 (25) = IDC/FLK50 (18)
white-grayD-SUB37 (7) = IDC/FLK50 (19)
brown-blackD-SUB37 (26) = IDC/FLK50 (20)
brown-redD-SUB37 (8) = IDC/FLK50 (21)
brown-orangeD-SUB37 (27) = IDC/FLK50 (22)
brown-yellowD-SUB37 (19) = IDC/FLK50 (23)
brown-greenD-SUB37 (37) = IDC/FLK50 (24)
brown-blueD-SUB37 (17) = IDC/FLK50 (25)
brown-violetD-SUB37 (36) = IDC/FLK50 (26)
brown-grayD-SUB37 (9) = IDC/FLK50 (27)
brown-whiteD-SUB37 (28) = IDC/FLK50 (28)
green-blackD-SUB37 (10) = IDC/FLK50 (29)
green-brownD-SUB37 (29) = IDC/FLK50 (30)
green-redD-SUB37 (11) = IDC/FLK50 (31)
green-orangeD-SUB37 (30) = IDC/FLK50 (32)
green-blueD-SUB37 (12) = IDC/FLK50 (33)
green-violetD-SUB37 (31) = IDC/FLK50 (34)
green-grayD-SUB37 (19) = IDC/FLK50 (35)
green-whiteD-SUB37 (37) = IDC/FLK50 (36)
yellow-blackD-SUB37 (36) = IDC/FLK50 (37)
yellow-brownD-SUB37 (18) = IDC/FLK50 (38)
yellow-redD-SUB37 (13) = IDC/FLK50 (39)
yellow-orangeD-SUB37 (32) = IDC/FLK50 (40)
yellow-blueD-SUB37 (14) = IDC/FLK50 (41)
yellow-violetD-SUB37 (33) = IDC/FLK50 (42)
yellow-grayD-SUB37 (15) = IDC/FLK50 (43)
yellow-whiteD-SUB37 (34) = IDC/FLK50 (44)
gray-blackD-SUB37 (16) = IDC/FLK50 (45)
gray-brownD-SUB37 (35) = IDC/FLK50 (46)
gray-redD-SUB37 (19) = IDC/FLK50 (47)
gray-orangeD-SUB37 (37) = IDC/FLK50 (48)

Connection data
Connection 1
Connection in acc. with standardIEC 60807-2
DIN 41652
Connection methodD-SUB socket strip
Screw threadUNC 4-40
M2,5
Number of connections1
Number of positions37
Tightening torque0.2 Nm
Insertion/withdrawal cycles> 200
Pitch2.77 mm
Connection 2
Connection in acc. with standardbased on IEC 60603-13
Connection methodIDC/FLK socket strip
Number of connections1
Number of positions50
Insertion/withdrawal cycles> 50
Pitch2.54 mm

Notes
Notes on operationFor proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met.

ETIM for 2302599 PLC's (EC000237)
Feature Name Feature Value
Function (EF000030) PLC - other devices
Length (EF001438) 0.5 m
Suitable for input board PLC (EF008271) No
Suitable for output card PLC (EF008272) Yes
Suitable for digital signals (EF008273) Yes
Suitable for analogue signals (EF008274) No
Type of electrical connection, field-sided (EF005525) Other
Type of electrical connection, box-sided (EF005524) Other
Number of poles (EF001391) 37

Datasheet - PDF

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.