S-PT-1X2-24DC 2880668 PHOENIX CONTACT Surge protection in the IP67 screw-on module for measuring sensors, di.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

S-PT-1X2-24DC 2880668 PHOENIX CONTACT Surge protection in the IP67 screw-on module for measuring sensors, di..

S-PT-1X2-24DC

2880668

PHOENIX_CONTACT

Available

Ship on today

Surge protection in the IP67 screw-on module for measuring sensors, direct mounting with M20 x 1.5 outer thread, cable gland for the signal cable, two-stage protective circuit. HART-compatible.

More details


Overvoltage Protection Over Voltage

TRABTECH Power and Signal Quality - PHOENIX CONTACT

Surge protection for measurement and control technology - PHOENIX CONTACT

* Brand new produt in its original packing covered by the warranties and certifications provided by PHOENIX_CONTACT

QuantityPrice
1+129,63 €
2+126,11 €
3+124,37 €
4+123,25 €
6+121,97 €
*This price is per unit and is the net value (not including taxes if applicable).

Related products

More info



Dimensions

Height34 mm
Width34 mm
Depth137 mm

Ambient conditions

Ambient temperature (operation)-40 °C ... 85 °C
Degree of protectionIP67

General

Housing materialZinc die-cast, surface bronzed and nickel-plated
Colorsilver
Standards for cearances and creepage distancesIEC 60664-1
VDE 0110-1
Mounting typect screw connection
TypeScrew-in module
Number of positions3
Direction of actionLine-Line & Line-Earth Ground

Protective circuit

IEC test classificationC1
C2
C3
D1
Nominal voltage UN24 V DC
Maximum continuous voltage UC40 V DC
28 V AC
Maximum continuous voltage UC (wire-wire)40 V DC
28 V AC
Nominal current IN450 mA (55°C)
Operating effective current IC at UC≤ 10 µA
Residual current IPE≤ 2 µA
Nominal discharge current In (8/20) µs (Core-Core)10 kA
Nominal discharge current In (8/20) µs (Core-Earth)10 kA
Nominal discharge current In (8/20) µs (Shield-Earth)10 kA (optional)
Total surge current (8/20) µs20 kA
Total surge current (10/350) µs2 kA
Max. discharge current Imax (8/20) µs maximum (Core-Core)10 kA
Max. discharge current Imax (8/20) µs maximum (Core-Earth)10 kA
Max. discharge current Imax (8/20) µs maximum (Shield-Earth)10 kA
Nominal pulse current Ian (10/1000) µs (Core-Core)23 A
Nominal pulse current Ian (10/1000) µs (Core-Earth)100 A
Nominal pulse current Ian (10/1000) µs (Shield-Earth)100 A
Impulse discharge current (10/350)˽µs, peak value limp1 kA
Output voltage limitation at 1 kV/µs (Core-Core) spike≤ 55 V
Output voltage limitation at 1 kV/µs (Core-Earth) spike≤ 450 V (Direct grounding)
Output voltage limitation at 1 kV/µs (Shield-Earth) spike≤ 600 V (optional)
Output voltage limitation at 1 kV/µs (Core-Core) static≤ 55 V
Output voltage limitation at 1 kV/µs (Core-Earth) static≤ 450 V (Direct grounding)
Residual voltage at In (conductor-conductor)≤ 55 V
Residual voltage with Ian (10/1000)µs (conductor-conductor)≤ 65 V
Voltage protection level Up (core-core)≤ 80 V (C2 -5 kA)
Voltage protection level Up (core-ground)≤ 450 V (C2 -5 kA, direct grounding)
Voltage protection level Up (shield-ground)≤ 600 V (C2 -5 kA optional)
Response time tA (Core-Core)≤ 1 ns
Response time tA (Core-Earth)≤ 100 ns
Response time tA (Shield-Earth)≤ 100 ns
Input attenuation aE, sym.typ. 0.5 dB (≤ 1.5 MHz / 50 Ω)
typ. 0.2 dB (≤ 300 kHz / 150 Ω)
Cut-off frequency fg (3 dB), sym. in 50 Ohm systemtyp. 6 MHz
Cut-off frequency fg (3 dB), sym. in 150 Ohm systemtyp. 2 MHz
Resistance in series2.2 Ω
Surge protection fault messageNone
Max. required back-up fuse500 mA (e.g. T in acc. with IEC 127-2/III)
Impulse durability (conductor-conductor)C2 - 10 kV/5 kA
Impulse durability (conductor-ground)C2 - 10 kV/5 kA
Impulse durability (shield-ground)C2 - 10 kV / 5 kA

Connection data

Connection nameInput/output
Connection methodScrew connection
Connection type INScrew terminal blocks
Connection type OUTConnection line
Connection methodScrew connection
Screw threadM3
Tightening torque0.6 Nm
Stripping length6 mm
Conductor cross section flexible min.0.14 mm²
Conductor cross section flexible max.1.5 mm²
Conductor cross section solid min.0.14 mm²
Conductor cross section solid max.1.5 mm²
Conductor cross section AWG min.26
Conductor cross section AWG max.16

Standards and Regulations

Standards/regulationsIEC 61643-21

Datasheet - PDF

Title:Language:Size:Type:
PHOENIX CONTACT-2880668-S-PT-1X2-24DCEnglish117 KbytesPHOENIX CONTACT-2880668-S-PT-1X2-24DC

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review