F-MS 12 2817987 PHOENIX CONTACT Surge arrester type 2, consisting of base element and protective plug with N.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

F-MS 12 2817987 PHOENIX CONTACT Surge arrester type 2, consisting of base element and protective plug with N..

F-MS 12




Ship on today

Surge arrester type 2, consisting of base element and protective plug with N-PE total current spark gap for mounting on NS 35/7.5, housing width: 17.5 mm (1 Div.)

More details

Overvoltage Protection Over Voltage

TRABTECH Power and Signal Quality - PHOENIX CONTACT

Surge protection - PHOENIX CONTACT

* Brand new produt in its original packing covered by the warranties and certifications provided by PHOENIX_CONTACT

1+57,15 €
4+53,65 €
7+52,61 €
10+52,03 €
14+51,57 €
*This price is per unit and is the net value (not including taxes if applicable).

Related products

More info


Height90 mm
Width17.6 mm
Depth58 mm
Horizontal pitch1 Div.

Ambient conditions

Degree of protectionIP20 (only when all terminal points are used)
Ambient temperature (operation)-40 °C ... 80 °C
Ambient temperature (storage/transport)-40 °C ... 80 °C
Altitude≤ 2000 m (amsl (above mean sea level))
Permissible humidity (operation)5 % ... 95 %
Shock (operation)25g (half sinus / 11 ms / 3x ±X, ±Y, ±Z)
Vibration (operation)5g (10 ... 500 Hz / 2.5 h / X, Y, Z)


Standards/specificationsIEC 61643-11 2011
EN 61643-11 2012
IEC test classificationII
EN typeT2
IEC power supply systemTN
Number of portsOne
SPD designVoltage-switching type
Mode of protectionN-PE
Mounting typeDIN rail: 35 mm
Colorjet black RAL 9005
Housing materialPA 6.6
Pollution degree2
Flammability rating according to UL 94V-0
TypeDIN rail module, two-section, divisible
Number of positions1
Surge protection fault messageoptical

Protective circuit

Nominal voltage UN240/415 V AC (TN - only N-PE)
240/415 V AC (TT - only N-PE)
Nominal frequency fN50 Hz (60 Hz)
Maximum continuous voltage UC260 V AC
Rated load current IL80 A
Residual current IPE≤ 5 µA
Standby power consumption PC≤ 1.5 mVA
Nominal discharge current In (8/20) µs20 kA
Maximum discharge current Imax (8/20) µs40 kA
Follow current interrupt rating Ifi100 A (260 V)
Voltage protection level Up≤ 1.5 kV
Residual voltage Ures≤ 0.4 kV (at In)
≤ 0.25 kV (at 10 kA)
≤ 0.15 kV (at 5 kA)
≤ 0.1 kV (at 3 kA)
Front of wave sparkover voltage at 6 kV (1.2/50) µs≤ 1.5 kV
TOV behavior at UT1200 V AC (200 ms / withstand mode)
Response time tA≤ 100 ns
Max. backup fuse with V-type through wiring80 A AC (gG)

Connection data

Connection methodScrew connection
Conductor cross section flexible min.1.5 mm²
Conductor cross section flexible max.25 mm²
Conductor cross section solid min.1.5 mm²
Conductor cross section solid max.35 mm²
Conductor cross section AWG15 ... 2
Screw threadM5
Tightening torque4.5 Nm
Stripping length16 mm

UL specifications

Maximum continuous operating voltage MCOV (N-G)260 V AC
Mode of protectionN-G
Power distribution system1
Nominal frequency50/60 Hz
Measured limiting voltage MLV (N-G)1490 V
Nominal discharge current In (N-G)20 kA

Datasheet - PDF

PHOENIX CONTACT-2817987-F-MS 12English125 KbytesPHOENIX CONTACT-2817987-F-MS 12

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
  Add review