VAL-MS 385/80/3+0 2921093 PHOENIX CONTACT Type 2 surge arrester for 4-wire power supply systems (L1, L2, L3,.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

VAL-MS 385/80/3+0 2921093 PHOENIX CONTACT Type 2 surge arrester for 4-wire power supply systems (L1, L2, L3,..

VAL-MS 385/80/3+0

2921093

PHOENIX_CONTACT

Available

Ship on today

Type 2 surge arrester for 4-wire power supply systems (L1, L2, L3, PEN), with connector latching.

More details


Overvoltage Protection Over Voltage

TRABTECH Power and Signal Quality - PHOENIX CONTACT

Surge protection - PHOENIX CONTACT

* Brand new produt in its original packing covered by the warranties and certifications provided by PHOENIX_CONTACT

QuantityPrice
1+185,85 €
2+181,27 €
3+179,00 €
4+177,60 €
*This price is per unit and is the net value (not including taxes if applicable).

Related products

More info



Dimensions

Height90 mm
Width53.4 mm
Depth77.5 mm
Horizontal pitch3 Div.

Ambient conditions

Degree of protectionIP20 (only when all terminal points are used)
Ambient temperature (operation)-40 °C ... 80 °C
Ambient temperature (storage/transport)-40 °C ... 80 °C
Altitude≤ 2000 m (amsl (above mean sea level))
Permissible humidity (operation)5 % ... 95 %
Shock (operation)30g (half sinus / 11 ms / 3x ±X, ±Y, ±Z)
Vibration (operation)7.5g (10 ... 500 Hz / 2.5 h / X, Y, Z)

General

Standards/specificationsIEC 61643-11 2011
EN 61643-11 2012
IEC test classificationII
T2
EN typeT2
IEC power supply systemTN-C
Number of portsOne
SPD designVoltage-limiting type
Mode of protectionL-PEN
Mounting typeDIN rail: 35 mm
Colorjet black RAL 9005
Housing materialPA 6.6
PBT
Degree of pollution2
Flammability rating according to UL 94V-0
TypeDIN rail module, two-section, divisible
Surge protection fault messageoptical

Protective circuit

Nominal voltage UN240/415 V AC (TN-C)
Nominal frequency fN50 Hz (60 Hz)
Maximum continuous voltage UC385 V AC
Rated load current IL80 A
Residual current IPE≤ 1800 µA
Standby power consumption PC≤ 690 mVA
Nominal discharge current In (8/20) µs40 kA
Maximum discharge current Imax (8/20) µs80 kA
Impulse discharge current (10/350)˽µs, charge1.25 As
Impulse discharge current (10/350)˽µs, specific energy1.56 kJ/Ω
Impulse discharge current (10/350)˽µs, peak value limp2.5 kA
Total discharge current ITotal (8/20) µs200 kA
Total discharge current ITotal (10/350) µs7.5 kA
Short-circuit current rating ISCCR25 kA
Voltage protection level Up≤ 2 kV
Residual voltage Ures≤ 2 kV (at In)
≤ 1.3 kV (at 10 kA)
≤ 1.2 kV (at 5 kA)
≤ 1.15 kV (at 3 kA)
TOV behavior at UT480 V AC (5 s / withstand mode)
457 V AC (120 min / withstand mode)
Response time tA≤ 25 ns
Max. backup fuse with branch wiring250 A (gG)
Max. backup fuse with V-type through wiring80 A (gG - 16 mm²)

Connection data

Connection methodScrew connection
Conductor cross section flexible1.5 mm² ... 25 mm²
Conductor cross section solid1.5 mm² ... 35 mm²
Conductor cross section AWG15 ... 2
Screw threadM5
Tightening torque4.5 Nm
Stripping length16 mm

UL specifications

SPD Type4CA
Maximum continuous operating voltage MCOV (L-L)385 V AC
Maximum continuous operating voltage MCOV (L-G)385 V AC
Nom. voltage240 V AC
Mode of protectionL-L
L-G
Power distribution system3D
Nominal frequency50/60 Hz
Measured limiting voltage MLV (L-L)3860 V
Measured limiting voltage MLV (L-G)2710 V
Nominal discharge current In (L-L)20 kA
Nominal discharge current In (L-G)20 kA

UL connection data

Conductor cross section AWG10 ... 2
Tightening torque30 lbf-in.

[email protected]

[email protected] 4.027140201
[email protected] 4.127130801
[email protected] 5.027130801
[email protected] 5.127130801
[email protected] 6.027130805
[email protected] 7.027130805
[email protected] 8.027130806
[email protected] 9.027130806

ETIM

ETIM 2.0EC000941
ETIM 3.0EC000941
ETIM 4.0EC000941
ETIM 5.0EC000941

UNSPSC

UNSPSC 6.0130212010
UNSPSC 7.090139121610
UNSPSC 1139121610
UNSPSC 12.0139121610
UNSPSC 13.239121620

Datasheet - PDF

Title:Language:Size:Type:
PHOENIX CONTACT-2921093-VAL-MS 385/80/3+0English126 KbytesPHOENIX CONTACT-2921093-VAL-MS 385/80/3+0

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review