FLS CO M12 DIO 8/8 M12 2736482 PHOENIX CONTACT Distributed I/O device View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

FLS CO M12 DIO 8/8 M12 2736482 PHOENIX CONTACT Distributed I/O device

FLS CO M12 DIO 8/8 M12

2736482

PHOENIX_CONTACT

Distributed I/O device

The Stand-Alone Team for CANopen®it has 8 digital inputs and 8 digital outputs, each chargeable with 500 mA. The M12 connection is made via the quick connect technology. The 24 V DC power supply is protected against short circuits and overload.

More details


I/O

Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT

* This article may be obsolete. Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

If our price is not the best, please ask us for a quote. Ask for a quotation

Best sellers

More info



Key Commercial Data

Orderkey2736482
Packing unit1 pc
Catalog pagePage 236 (C-6-2017)
GTIN4017918974275
Weight per Piece (excluding packing)350.000 g
Custom tariff number85176200
Country of originDE (Germany)

Note

Utilization restriction1

Dimensions

Dimensional drawing
Width60 mm
Height178 mm
Depth49.3 mm
Drill hole spacing168 mm

Ambient conditions

Ambient temperature (operation)-25 °C ... 60 °C
Ambient temperature (storage/transport)-25 °C ... 85 °C
Permissible humidity (storage/transport)95 %
Air pressure (operation)80 kPa ... 106 kPa (up to 2000 m above sea level)
Air pressure (storage/transport)70 kPa ... 106 kPa (up to 3000 m above sea level)
Degree of protectionIP65/IP67

General

Mounting typeWall mounting
Net weight350 g

Interfaces

DesignationCANopen®
Connection method2 M12 connectors, A-coded
Transmission speed10, 20, 50, 125, 250, 500, 1000 kBit/s (Automatic baud rate detection)
Transmission physicsCopper cable with optional power supply in acc. with CAN standard
Address area assignment1 ... 126, adjustable
Number of positions5

Power supply for module electronics

Connection methodM12 connector, (A-coded)
DesignationUL
Supply voltage24 V DC
Supply voltage range18 V DC ... 30 V DC (including ripple)

Fieldline potentials

Voltage supply UL24 V DC
Power supply at ULmax. 4 A
Current consumption from ULtyp. 60 mA
max. 100 mA
Voltage supply US24 V DC
Power supply at USmax. 4 A
Current consumption from UStyp. 10 mA (plus sensor current)
max. 500 mA
Voltage supply UA1124 V DC
Power supply at UA11max. 4 A
Current consumption at UA11typ. 6 mA (plus actuator current)
max. 4 A
Voltage supply UA1224 V DC
Power supply at UA12max. 4 A
Current consumption at UA12typ. 6 mA (plus actuator current)
max. 4 A

Digital inputs

Input nameDigital inputs
Description of the inputIEC 61131-2 type 1
Connection methodM12 connector, double occupancy
Connection technology2, 3, 4-wire
Number of inputs8
Filter time3 ms
Input voltage24 V DC
Input voltage range "0" signal-30 V DC ... 5 V DC
Input voltage range "1" signal13 V DC ... 30 V DC

Digital outputs

Output nameDigital outputs
Connection methodM12 connector, double occupancy
Connection technology2, 3-wire
Number of outputs8
Type of protectionShort-circuit protection
Output voltage24 V DC
Maximum output current per channel500 mA

Electrical isolation

Test section24 V supply (bus logics) / FE
24 V supply (bus logics) / Digital inputs (sensor supply / I/O) 500 V AC 50 Hz 1 min.
FE / Digital inputs (sensor supply) 500 V AC 50 Hz 1 min.

Standards and Regulations

Connection in acc. with standardCUL
Protection classIII, IEC 61140, EN 61140, VDE 0140-1

Environmental Product Compliance

China RoHSEnvironmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”

Classifications


Datasheet - PDF

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.