ELR W3-230AC/500AC- 2 2297303 PHOENIX CONTACT Three-phase solid-state reversing contactor with 230 V AC inpu.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

ELR W3-230AC/500AC- 2 2297303 PHOENIX CONTACT Three-phase solid-state reversing contactor with 230 V AC inpu..

ELR W3-230AC/500AC- 2




Ship on today

Three-phase solid-state reversing contactor with 230 V AC input, 2 A output current, zero voltage switch, optionally with thermal fuse

More details

Programmable Logic Controllers Plcs

INTERFACE Signal converters, switching devices, and power supply units - PHOENIX CONTACT

Solid state relays and power electronics. Relay - PHOENIX CONTACT

* Brand new produt in its original packing covered by the warranties and certifications provided by PHOENIX_CONTACT

1+145,79 €
2+142,38 €
3+140,69 €
4+140,37 €
*This price is per unit and is the net value (not including taxes if applicable).

Related products

More info


Width40 mm
Height99 mm
Depth114.5 mm

Ambient conditions

Ambient temperature (operation)-25 °C ... 70 °C
Ambient temperature (storage/transport)-25 °C ... 70 °C
Degree of protectionIP20

Input data

Input nameDevice supply
Mains frequency50 Hz
60 Hz
Protective circuitSurge protection Varistor
Status displayYellow LED
IndicationRed LED
Input nameControl input right/left
Rated actuating voltage UC230 V AC (Ensure phase balance)
Voltage range with reference to UC0.4 ... 1.1
Rated actuating current IC11.2 mA
Switching threshold48 V AC (“0” signal)
96 V AC (“1” signal)

Output data

Output nameAC output
Nominal output voltage500 V AC
Nominal output voltage range48 V AC ... 575 V AC
Periodic peak reverse voltage1200 V
Rated operating current at AC-512 A
Rated operating current at AC-53a2 A
Leakage current6 mA
Residual voltage< 1.5 V
Surge current200 A (t = 10 ms)
Max. load value250 A2s
Type of protectionRCV circuit
Surge voltage protection> 575 V AC

Connection data, control circuit

Connection nameControl circuits
Connection methodScrew connection
Stripping length8 mm
Screw threadM3
Conductor cross section solid0.2 mm² ... 2.5 mm²
Conductor cross section flexible0.2 mm² ... 2.5 mm²
Conductor cross section AWG24 ... 14


Test voltage input/output5 kVrms
Switching frequencymax. 1 Hz
Mounting positionVertical (horizontal DIN rail)
Assembly instructionsCan be aligned with spacing = 20 mm
Operating mode100% operating factor
DesignationAir clearances and creepage distances between the power circuits
Standards/regulationsDIN EN 50178
InsulationBasic insulation
Pollution degree2
Overvoltage categoryIII
Standards/regulationsEN 60947
Reversing frequency≤ 2 Hz

Datasheet - PDF

PHOENIX CONTACT-2297303-ELR W3-230AC/500AC- 2English117 KbytesPHOENIX CONTACT-2297303-ELR W3-230AC/500AC- 2

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
  Add review