ANUNCIAR
SACCBP-FS-12CON-M16/2,0-PVCSCO 1442191 PHOENIX CONTACT Flush-type connector View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

SACCBP-FS-12CON-M16/2,0-PVCSCO 1442191 PHOENIX CONTACT Flush-type connector

SACCBP-FS-12CON-M16/2,0-PVCSCO

1442191

PHOENIX_CONTACT

Flush-type connector

Conect. plug. to be apar. wall poster., Universal, 12-pole, PVC/PVC, black RAL 9005, shielded, Built-in mounting female, straight, M12-SPEEDCON, coding: A , free cable end, Rear mounting, M16 x 1.5, Cable connection, cable length: 2 m, 0.14 mm², black PVC, Alternative product according to RoHS II without exception 6c (Pb< 0.1%) item code: 1239766

Device connector rear mounting, Universal, 12-position, PVC/PVC, black RAL 9005, shielded, Socket, straight, M12-SPEEDCON, coding: A, on free cable end, Rear mounting, M16 x 1.5, Cable connection, cable length: 2 m, 0.14 mm2, PVC black, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239766

More details


Connectors > Circular connector, mounting (with cable)

Field Device Connectors (FDC)

Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT

Total: $89.27
Unit price: $89.27
This price is per unit and is the net value (not including taxes if applicable).

If our price is not the best, please ask us for a quote. Ask for a quotation

Related products

Best sellers

More info



Technical data

Notes
Notes on operationThe electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration.
Order information:Lock nut is included in the scope of delivery

Mounting
Mounting typeRear mounting M16 x 1.5 Thread with flat nut
Assembly noteThread with flat nut

Product properties
Product typeCircular connectors (device side)
Sensor typeUniversal
Number of positions12
No. of cable outlets1
Shieldedyes
CodingA
Thread typeM12
Data management status
Article revision09
Insulation characteristics
Overvoltage categoryII
Degree of pollution3

Material specifications
Flammability rating according to UL 94V0
Seal materialFKM
Contact materialCuZn
Contact surface materialAu
Contact carrier materialPA 6.6
Material for screw connectionZinc die-cast, nickel-plated
Outer sheath, materialPVC
Conductor materialTin-plated Cu litz wires

Electrical properties
Rated surge voltage0.8 kV
Contact resistance≤ 3 mΩ
Insulation resistance≥ 100 MΩ
Nominal voltage UN30 V
Nominal current IN1.5 A
Max. conductor resistance142 Ω/km

Connection data
Conductor connection
Connection methodCable connection
Contact connection typeSocket
Conductor cross section6x 2x 0.14 mm²
Tightening torque3 Nm ... 4 Nm (Installation-side)

Mechanical properties
Mechanical data
Insertion/withdrawal cycles> 100

Connector
Connection 1
Head designSocket
Head cable outletstraight
Head thread typeM12
Head locking typeSPEEDCON
CodingA
Connection 2
Head designfree cable end

Cable/line
Cable length2 m
Cable typePVC black
Short symbolPVC
Signal type/categoryUniversal
External cable diameter7.00 mm ±0.03 mm
Outer sheath, materialPVC
External sheath, colorblack RAL 9005
Wire diameter incl. insulation1 mm ±0.05 mm
Single wire, colorwhite-brown, green-yellow, gray-pink, blue-red, black-violet, gray/pink-red/blue
Cable cross section6x 2x 0.14 mm²
Material, inner sheathPVC
Conductor materialTin-plated Cu litz wires
Conductor structure signal line18x 0.10 mm
Material wire insulationPVC
Thickness, insulation0.21 mm
Overall twistSix pairs around the filler to the core
ShieldingTinned copper braided shield
Optical shield covering85 %
Nominal voltage, cable300 V
Test voltage, cable1500 V AC
Cable resistance142 Ω/km (at 20 °C)
Smallest bending radius, fixed installation42 mm
Smallest bending radius, movable installation105 mm
Resistance to oilin accordance with DIN EN 60811-404
Flame resistanceIEC 60332-1-2, IEC 60332-1, FT1, VW-1
Other resistanceHydrolysis and microbe resistant as per VDE 0282 section 10
Ambient temperature (operation)-40 °C ... 85 °C (cable, fixed installation)
-25 °C ... 85 °C (Cable, flexible installation)

Environmental and real-life conditions
Ambient conditions
Degree of protectionIP67 (When plugged in)
IP65 (When plugged in)
IP65/IP67
Ambient temperature (operation)-25 °C ... 85 °C (Plug / socket)
-40 °C ... 85 °C (without mechanical actuation)
-25 °C ... 85 °C (Cable, flexible installation)
-40 °C ... 85 °C (cable, fixed installation)
Resistance to oilin accordance with DIN EN 60811-404

Standards and regulations
Flame resistanceIEC 60332-1-2, IEC 60332-1, FT1, VW-1
Resistance to oilin accordance with DIN EN 60811-404
Other resistanceHydrolysis and microbe resistant as per VDE 0282 section 10
Standard designationM12 connector
Standards/specificationsIEC 61076-2-101

ETIM for 1442191 Connectors (EC002635)
Feature Name Feature Value
Contact type (EF001587) Other
Number of data contacts (EF012232) 0
Number of power contacts (EF012216) 0
Number of control contacts (EF012217) 12
Type of housing (EF006980) Straight
Rated current In (EF008250) 1.5 A
Ambient temperature (EF002386) -25 °C
Rated voltage (EF000228) 30 V
Over voltage category (EF006785) II
Pollution degree (EF006786) 3
Material of contact surface (EF004020) Gold
Housing material (EF001596) Plastic
Material thread ring (EF012304) Other
Type of locking (EF000208) Other
Inflammability class of insulation material according to UL94 (EF002521) V0
With protective conductor (EF007468) No
Degree of protection (IP), mounted (EF007466) IP67
Min. number of insertion cycles (EF012212) 100
Screened (EF000881) Yes
With status indication (EF001602) No

Datasheet - PDF

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.