No products
Product successfully added to your shopping cart
View larger
PLC-SP-EIK 1-SVN 24M 2982605 PHOENIX CONTACT Single-channel NAMUR module with 24 V DC input voltage
PLC-SP-EIK 1-SVN 24M
2982605
PHOENIX_CONTACT
Single-channel NAMUR module with 24 V DC input voltage
PLC-INTERFACE for NAMUR applications, consisting of PLC-BSP.../21 base terminal block with spring connection and integrated circuit, for NS 35/7.5 rail mounting, with negative switching, 1 closing contact, input voltage 24 V DC
Home > PHOENIX CONTACT
Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
Best sellers
▲More info
▲| Restriction of Use | |
| EMC Indication | EMC: Class A product, see manufacturer's statement in the download center |
| Product Type | Solid State Relay Module |
| Product Family | PLC-INTERFACE |
| application | NAMUR Proximity Detectors |
| Operating Mode | Working time 100% |
| Data Maintenance Status | |
| Date of last data maintenance | 13.10.2023 |
| Insulation Properties: Leak Lines and Air Gaps Between Circuits | |
| Isolation | Basic Insulation |
| Surge Category | I |
| Degree of pollution | 2 |
| Creepage lines and air gaps between circuits | |
| Sizing Insulation Voltage | 50 V DC |
| Dimensioning Transient Voltage | 0.4 kV |
| Control circuit | |
| Nominal Input Voltage UN | 8.2 V DC ±10 % |
| Protection Circuit | Prot. Surge; Suppressor diode |
| Open-circuit voltage | 8.2 V DC ±10 % |
| Switching Point | ≥ 2.1 mA (In conductive state) |
| ≤ 1.2 mA (In a locked state) | |
| 6.3 mA ... 10 mA (in case of short circuit) | |
| 0 mA ... 0.35 mA (in case of conductor breakage) | |
| Switching hysteresis | approx. 0.2 mA |
| Internal resistance | approx. 1000 Ω |
| Cable length | < 30 m |
| Denomination | Signal output |
| Contact Switching Type | 1 open contact |
| Digital Output Type | electronic |
| Output Voltage Range | 3V DC... 33 V DC |
| Constant Current Limit | 50 mA |
| Transmission Frequency | approx. 350 Hz |
| Voltage drop with constant current maximum limit | < 1.5 V |
| Status Indication | LED (green) |
| Error Indication | Red LED |
| Protection Circuit | Prot. Surge; Suppressor diode |
| Denomination | Fault Warning Output |
| Nominal Output Voltage | 30 V DC |
| Output Voltage Range | 3V DC... 33 V DC |
| Constant Current Limit | 100 mA |
| Voltage drop with constant current maximum limit | < 1.5 V |
| Error Indication | Red LED |
| Protection Circuit | Prot. Surge; Suppressor diode |
| Inlet Side | |
| Connection type | Spring-loaded connection |
| Length to be de-insulated | 8 mm |
| Rigid conductor section | 0.14 mm² ... 2.5 mm² |
| Flexible conductor section | 0.14 mm² ... 2.5 mm² |
| AWG Conductor Section | 26 ... 14 |
| Outlet Side | |
| Connection type | Spring-loaded connection |
| Length to be de-insulated | 8 mm |
| Rigid conductor section | 0.14 mm² ... 2.5 mm² |
| Flexible conductor section | 0.14 mm² ... 2.5 mm² |
| AWG Conductor Section | 26 ... 14 |
| Width | 6.2 mm |
| Height | 80 mm |
| Depth | 86 mm |
| Colour | green (RAL 6021) |
| Flammability class according to UL 94 | V0 (Housing) |
| Environmental conditions | |
| Protection Index | IP20 |
| Ambient Temperature (Service) | -25 °C ... 50 °C |
| Ambient Temperature (Storage/Transport) | -40 °C ... 85 °C |
| Creepage lines and air gaps between circuits | |
| Standards/Specifications | IEC 60664 |
| EN 50178 | |
| Installation instructions | Alignable without separation |
| Position for mounting | discretionary |
Reviews (0) ▲
No customer reviews for the moment.
| Rating: |
|
| Name: | |
| Email: | |
| Subject: | |
| Text: | |
| Do you recommend this product to buy? | |
|
|
|
| Add review | |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.