FL MGUARD RS4000 TX/TX VPN 2200515 PHOENIX CONTACT Router View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

FL MGUARD RS4000 TX/TX VPN 2200515 PHOENIX CONTACT Router

FL MGUARD RS4000 TX/TX VPN

2200515

PHOENIX_CONTACT

Router

Security appliance, 10/100 MBit/s, NAT, Advanced firewall, VPN, feature extension with licenses

More details


Data and telecommunication > Network router

I/O

Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT

* This article may be obsolete. Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

If our price is not the best, please ask us for a quote. Ask for a quotation

Related products

Best sellers

More info



Key Commercial Data

Orderkey2200515
Packing unit1 pc
Catalog pagePage 433 (C-6-2017)
GTIN4046356597289
Weight per Piece (excluding packing)725.000 g
Custom tariff number85176200
Country of originDE (Germany)

Note

Utilization restriction1

Dimensions

Width45 mm
Height130 mm
Depth114 mm

Ambient conditions

Degree of protectionIP20
Ambient temperature (operation)-20 °C ... 60 °C
Ambient temperature (storage/transport)-20 °C ... 70 °C
Permissible humidity (operation)5 % ... 95 % (non-condensing)

Interfaces

Interface 1Ethernet
No. of ports2 (RJ45 ports)
Transmission physicsEthernet in RJ45 twisted pair
Transmission speed10/100 Mbps
Transmission length100 m (per segment)
Signal LEDsSupply voltage, data transmission, error, link, activity
Interface 3VPN - release button
Connection method24 V DC/250 mA can be connected as an option

Function

Basic functionsRouter with intelligent firewall and VPN for 10 tunnels (up to 250 supported with optional additional license), CIFS Integrity Monitoring (as an option), metal housing, slot for SD memory card, extended temperature range, high-performance firewall/VPN: up to 124 Mbps/40 Mbps
Supported browsersHTTPS support required
Processor330 MHz
Status and diagnostic indicatorsLEDs:P1, P2, Fault, State, Error, LAN, WAN
Signal contact control voltage24 V DC (typical)
Signal contact control current250 mA (short-circuit-proof)

Security functions

Dynamic Host Configuration Protocol (DHCP) supportServer or Relay Agent
Network Time Protocol (NTP) clientClient
Link Layer Discovery Protocol (LLDP)As per protocol 802.2
Remote Syslog LoggingOn externals server
Virtual private network (VPN) throughputmax. 40 Mbps (Router mode, VPN bidirectional throughput)
max. 27 Mbps (Stealth mode, VPN bidirectional throughput)
Number of VPN tunnels10 (up to 250 tunnels with additional license as an option)
Encryption methodsDES, 3DES, AES-128, -192, -256
Internet Protocol Security (IPsec) modeESP tunnel / ESP transport
AuthenticationX.509v3 certificates with RSA or PSK
Data integrityMD5, SHA-1, SHA 256, SHA-512
1:1 Network Address Translation (NAT) in the VPNSupported
Firewall data throughputmax. 124 Mbps (Router mode, default firewall rules, bidirectional throughput)
max. 61 Mbps (Stealth mode, default firewall rules, bidirectional throughput)
Firewall rulesConfigurable stateful inspection firewall with full scope of functions
FilteringMAC and IP addresses, ports, protocols
Protection againstIP spoofing, DoS and Syn Flood Protection
RoutingStandard routing, NAT, 1:1-NAT, port forwarding

Network expansion parameters

Maximum conductor length (twisted pair)100 m

Supply voltage

Supply voltage24 V DC (redundant)
Residual ripple3.6 VPP(within the permitted voltage range)
Supply voltage range11 V DC ... 36 V DC
Typical current consumption100 mA (at US= 24 V DC)
Max. current consumption0.24 A

General

Mounting typeDIN rail
Type AXStand-alone
Net weight725 g
Housing materialMetal

Conformity with EMC directives

Developed in acc. with standardIEC 61000-6.2
Test standardIEC 61000-4-2 (ESD)
Test result6 kV contact discharge, 8 kV air discharge
Test standardIEC 61000-4-3 (immunity to radiated interference)
Test result10 V/m (80 MHz ... 2000 MHz)
Test standardIEC 61000-4-4 (burst)
Test result2 kV power line, 1kV data line
Test standardIEC 61000-4-5 (surge)
Test resultpower line: 2 kV (line/earth), 1 kV (line/line), 1kV data line
Test standardIEC 61000-4-6 (immunity to conducted interference)
Test result3 V (10 kHz ... 150 kHz), 10 V (150 kHz ... 80 MHz)

Standards and Regulations

Electromagnetic compatibilityConformance with EMC Directive 2014/30/EU
Type of testShock in acc. with EN 60068-2-27/IEC 60068-2-27
Test resultHalf-sine 30g, 18 ms, 3 axes
Type of testVibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6
Test result5g, 150 Hz
Noise emissionEN 55022 / Class B
Noise immunityEN 61000-6-2:2005
ConformanceCE-compliant

Environmental Product Compliance

China RoHSEnvironmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”

Classifications


ETIM for 2200515 Data networking products (EC001478)
Feature Name Feature Value
Mounting method (EF000003) Other
Degree of protection (IP) (EF005474) IP20

Datasheet - PDF

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.