IB IL 24 PSDI 8-PAC 2985688 PHOENIX CONTACT Safety-related digital input module, IP20 protection, for the Sa.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

IB IL 24 PSDI 8-PAC 2985688 PHOENIX CONTACT Safety-related digital input module, IP20 protection, for the Sa..

IB IL 24 PSDI 8-PAC

2985688

PHOENIX_CONTACT

Available

Ship on today

Safety-related digital input module, IP20 protection, for the SafetyBridge, INTERBUS-Safety, and PROFIsafe system. The module has 4 safe digital inputs for two-channel assignment or 8 safe digital inputs for single-channel assignment.

More details


Programmable Logic Controllers Plcs

INTERFACE Signal converters, switching devices, and power supply units - PHOENIX CONTACT

Relays and security module and speed control. Safety - PHOENIX CONTACT

* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT

Quantity Price
1+$391.59
2+$379.89
3+$374.29
4+$372.49
*This price is per unit and is the net value (not including taxes if applicable).

Related products

More info



Product description

The safety module is an input module from the Inline product range, designed for use in a SafetyBridge, INTERBUS-Safety or PROFIsafe system. The safety module can be used as part of an Inline station at any point within a SafetyBridge, INTERBUS-Safety or PROFIsafe Inline system. The transmission speed of the safety module can be set to 500 kbaud or 2 Mbaud using a switch. Only one transmission speed must be used uniformly within a station. The module has four safe digital inputs for two-channel assignment or eight safe digital inputs for single-channel assignment. The inputs can be parameterized according to the application and enable the integration of sensors in the safe SafetyBridge, INTERBUS (INTERBUS-Safety), and PROFIsafe system. Depending on the installation and parameterization, in these systems the safety module can achieve the following safety integrity:

– Up to category 4 according to standard EN 954-1

– Up to SIL 3 according to standards EN 61508 and EN 62061

– Up to PL e according to standard EN ISO 13849-1

Dimensions

Width48.8 mm
Height119.8 mm
Depth71.5 mm
Note on dimensionsHousing dimensions

Ambient conditions

Ambient temperature (operation)-25 °C ... 55 °C
Ambient temperature (storage/transport)-25 °C ... 70 °C
Permissible humidity (operation)10 % ... 85 % (Take suitable measures against increased air humidity within the permitted temperature range.)
Permissible humidity (storage/transport)10 % ... 85 % (Take suitable measures against increased air humidity within the permitted temperature range.)
Air pressure (operation)80 kPa ... 108 kPa (up to 2000 m above sea level)
Air pressure (storage/transport)66 kPa ... 108 kPa (up to 3500 m above mean sea level)
Degree of protectionIP20

Interfaces

Fieldbus systemINTERBUS
DesignationInline local bus
Connection methodInline data jumper
Transmission speed500 kBit/s 2MBit/s (can be switched)

Digital inputs

Input nameDigital inputs
Connection methodSpring-cage connection
2, 3, 4-wire
Number of inputs4 (with two-channel assignment)
8 (for single-channel assignment)
Typical response timeSee technical data
Input characteristic curveIEC 61131-2 type 3
Input voltage24 V DC (via clock outputs UT1 and UT2 or external supply)
Input voltage range "0" signal-3 V DC ... 5 V DC
Input voltage range "1" signal11 V DC ... 30 V DC
Input voltage range-3 V DC ... 30 V DC
Typical input current per channel4.2 mA (at 24 V)

Power supply for module electronics

Supply voltage24 V DC (via voltage jumper)
Supply voltage range19.2 V DC ... 30 V DC
Communications power UL7.5 V (via voltage jumper)
Current consumptionmax. 180 mA (from the local bus)

General

Net weight349.4 g
Note on weight specificationswith connectors
Mounting typeDIN rail
Category according to EN 13849-14

Inline potentials

Communications power UL7.5 V DC (see safety data)
Current consumption from ULmax. 180 mA
Main circuit supply UM24 V DC
Supply voltage range UM19.2 V DC ... 30 V DC (including ripple)
Current consumption from UMtyp. 25 mA (plus current consumption of the inputs when supplied via the clock outputs, plus current consumption of the connected initiators when via through the clock outputs)
max. 825 mA (see safety data)

Datasheet - PDF

Title: Language: Size: Type:
PHOENIX CONTACT-2985688-IB IL 24 PSDI 8-PAC English 111 Kbytes PHOENIX CONTACT-2985688-IB IL 24 PSDI 8-PAC

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review

Últimas Opiniones de Nuestros Clientes

Todas las valoraciones que recibimos de los artículos que ofrecemos son reales y están verificadas. Un pequeño gesto, pero de mucho valor. Por eso, te agradecemos ese minuto que inviertes en dejarnos tu opinión y calificación sobre los productos, porque nos ayuda a seguir mejorando y a ofrecerte un servicio de todavía mayor calidad.