FL MGUARD GT/GT 2700197 PHOENIX CONTACT Router View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

FL MGUARD GT/GT 2700197 PHOENIX CONTACT Router

FL MGUARD GT/GT

2700197

PHOENIX_CONTACT

Router

More details


I/O

* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT

Total price: $2,122.90
Unit price: $2,122.90

*This price is per unit and is the net value (not including taxes if applicable).

If our price is not the best, please ask us for a quote. Ask for a quotation

Viewed products


More info



Key Commercial Data

Orderkey2700197
Packing unit1 pc
Catalog pagePage 433 (C-6-2017)
GTIN4046356499651
Weight per Piece (excluding packing)660.000 g
Custom tariff number85176200
Country of originDE (Germany)

Note

Utilization restrictionEMC: class A product, see manufacturer's declaration in the download area

Dimensions

Width128 mm
Height110 mm
Depth69 mm

Ambient conditions

Degree of protectionIP20
Ambient temperature (operation)-20 °C ... 60 °C
Ambient temperature (storage/transport)-40 °C ... 85 °C
Permissible humidity (operation)5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)5 % ... 95 % (non-condensing)
Air pressure (operation)86 hPa ... 108 kPa (1500 m above sea level)
Air pressure (storage/transport)66 hPa ... 108 kPa (3500 m above sea level)

Interfaces

Interface 1Ethernet (combo)
No. of ports2 (Combo ports)
Note on the connection methodEither SFP port or RJ45 port active
Transmission physicsCopper or SFP module
Transmission speed10/100/1000 Mbps (SFP module: 100/1000 Mbps)
Transmission length100 m (per segment)
Signal LEDsSupply voltage, data transmission, error, link, activity
Interface 2Fiber optic interface
Transmission physicsDepending on the SFP module
Transmission speed1000 Mbps (full duplex)
Transmission lengthup to 80 km (Depending on the fiber/SFP module used)
Interface 3Fiber optic interface
Connection methodSFP ports
Transmission physicsDepending on the SFP module
Transmission speed1000 Mbps (full duplex)
Transmission lengthup to 80 km (Depending on the fiber/SFP module used)

Function

Basic functionsRouter with intelligent firewall and Gigabit connectivity
Supported browsersHTTPS support required
Status and diagnostic indicatorsLEDs: LNK, Mode, Inf, ACT, SPD, FD, US1, US2, Fail, and 7-segment display
Signal contact control voltage24 V DC (typical)
Signal contact control current270 mA (typical)

Security functions

Dynamic Host Configuration Protocol (DHCP) supportServer or Relay Agent
Network Time Protocol (NTP) clientClient
Link Layer Discovery Protocol (LLDP)As per protocol 802.2
Remote Syslog LoggingOn externals server
Virtual private network (VPN) throughputmax. 106 Mbps (Router mode, VPN bidirectional throughput)
Number of VPN tunnels0 (up to 250 tunnels with additional license as an option)
Encryption methodsDES, 3DES, AES-128, -192, -256
Data integrityMD5, SHA-1, SHA 256, SHA-512
Firewall data throughputmax. 417 Mbps (Router mode, default firewall rules, bidirectional throughput)
max. 174 Mbps (Stealth mode, default firewall rules, bidirectional throughput)
Firewall rulesConfigurable stateful inspection firewall
FilteringMAC and IP addresses, ports, protocols
Protection againstIP spoofing, DoS and Syn Flood Protection
RoutingStandard routing, NAT, 1:1-NAT, port forwarding

Network expansion parameters

Maximum conductor length (twisted pair)100 m

Supply voltage

Supply voltage24 V DC (redundant)
Residual ripple3.6 VPP(within the permitted voltage range)
Supply voltage range18 V DC ... 32 V DC
Typical current consumption270 mA (at US= 24 V DC)
Max. current consumption270 mA

General

Mounting typeDIN rail
Type AXStand-alone
Net weight660 g
Housing materialMetal

Conformity with EMC directives

Developed in acc. with standardIEC 61000-6.2
Test standardIEC 61000-4-2 (ESD)
Test result6 kV contact discharge, 8 kV air discharge
Test standardIEC 61000-4-3 (immunity to radiated interference)
Test result10 V/m (80 MHz ... 2000 MHz)
Test standardIEC 61000-4-4 (burst)
Test result2 kV power line, 1kV data line
Test standardIEC 61000-4-5 (surge)
Test resultpower line: 2 kV (line/earth), 1 kV (line/line), 1kV data line
Test standardIEC 61000-4-6 (immunity to conducted interference)
Test result3 V (10 kHz ... 150 kHz), 10 V (150 kHz ... 80 MHz)

Standards and Regulations

Electromagnetic compatibilityConformance with EMC Directive 2014/30/EU
Noise emissionEN 61000-6-4
Noise immunityEN 61000-6-2:2005
Vibration (storage/transport)5g, 10 Hz ... 150 Hz, in accordance with IEC 60068-2-6
Free from substances that could impair the application of coatingIn acc. with VW specification
ShockDIN EN 60068-2-27
Vibration (operation)in accordance with IEC 60068-2-6: 5g, 10 Hz ... 150 Hz

Environmental Product Compliance

REACh SVHC1,2-dimethoxyethane,ethylene glycol dimethyl ether (EGDME) 110-71-4
Lead 7439-92-1
China RoHSEnvironmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”

Classifications

Datasheet - PDF

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.