Product successfully added to your shopping cart
F-MS-T1/T2 50 ST
2800191
PHOENIX_CONTACT
10
Type 1/2 surge protection plug
Trabtech (TT)
* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
Thank you for your interest in our products; we hope the delivery time indicated is to your convenience.
While the order is being processed you can select the type of shipment that best suits your needs: 24-hour air express, standard 48-72 hour land, etc.
Orderkey | 2800191 |
---|---|
Packing unit | 10 pc |
Catalog page | Page 36 (C-4-2017) |
GTIN | 4046356518628 |
Weight per Piece (excluding packing) | 77.900 g |
Custom tariff number | 85363030 |
Country of origin | DE (Germany) |
Degree of protection | IP20 |
---|---|
Ambient temperature (operation) | -40 °C ... 80 °C |
Ambient temperature (storage/transport) | -40 °C ... 80 °C |
Altitude | ≤ 2000 m (amsl (above mean sea level)) |
Permissible humidity (operation) | 5 % ... 95 % |
Shock (operation) | 30g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) |
Vibration (operation) | 7.5g (10 ... 500 Hz / 2.5 h / X, Y, Z) |
IEC test classification | I / II |
---|---|
T1 / T2 | |
T1 | |
EN type | T1 / T2 |
T1 | |
IEC power supply system | TT |
TN-S | |
Mode of protection | N-PE |
Mounting type | on base element |
Color | jet black RAL 9005 |
Housing material | PA 6.6 |
PBT | |
Degree of pollution | 2 |
Flammability rating according to UL 94 | V-0 |
Type | DIN rail module, two-section, divisible |
Surge protection fault message | optical |
Nominal voltage UN | 240/415 V AC (TN-S) |
---|---|
240/415 V AC (TT) | |
Nominal frequency fN | 50 Hz (60 Hz) |
Maximum continuous voltage UC | 264 V AC |
Residual current IPE | ≤ 5 µA |
Standby power consumption PC | ≤ 1.3 mVA |
Nominal discharge current In(8/20) µs | 50 kA |
Maximum discharge current Imax(8/20) µs | 50 kA |
Impulse discharge current (10/350) µs, charge | 25 As |
Impulse discharge current (10/350) µs, specific energy | 625 kJ/Ω |
Impulse discharge current (10/350) µs, peak value limp | 50 kA |
Follow current interrupt rating Ifi | 100 A (264 V AC) |
Voltage protection level Up | ≤ 1.7 kV |
Residual voltage Ures | ≤ 0.6 kV (at In) |
≤ 0.5 kV (at 10 kA) | |
≤ 0.5 kV (at 5 kA) | |
≤ 0.4 kV (at 3 kA) | |
Front of wave sparkover voltage at 6 kV (1.2/50) µs | ≤ 1.7 kV |
TOV behavior at UT | 1200 V AC (200 ms / withstand mode) |
Response time tA | ≤ 100 ns |
SPD Type | 4CA |
---|---|
Maximum continuous operating voltage MCOV (N-G) | 264 V AC |
Mode of protection | N-G |
Power distribution system | Single phase |
Nominal frequency | 50/60 Hz |
Measured limiting voltage MLV (N-G) | 2600 V |
Nominal discharge current In(N-G) | 20 kA |
Title: | Size: | Type: |
---|---|---|
PDF CATALOG PHOENIX PROTECTION EN.pdf | 27 Mbytes | |
PHOENIX CONTACT-2800191-F-MS-T1/T2 50 ST | 119 Kbytes |
No customer reviews for the moment.
Rating: | |
Name: | |
Email: | |
Subject: | |
Text: | |
Do you recommend this product to buy? | |
Add review |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.