DEK-REL- 24/1/S 2964131 PHOENIX CONTACT Relay terminal block, with soldered-in miniature relays, contact (Ag.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

DEK-REL- 24/1/S 2964131 PHOENIX CONTACT Relay terminal block, with soldered-in miniature relays, contact (Ag..

DEK-REL- 24/1/S





Ship on today

Relay terminal block, with soldered-in miniature relays, contact (AgNi+Au): small to medium loads, 1 N/O contact, input voltage 24 V AC/DC, with integrated "manual", "0", "automatic" switch, for assembly on NS 35/7.5, terminal width 6.2 mm

More details

Programmable Logic Controllers Plcs

INTERFACE Signal converters, switching devices, and power supply units - PHOENIX CONTACT

INTERFACE Industrial Relays

* Brand new produt in its original packing covered by the warranties and certifications provided by PHOENIX_CONTACT

10+26,87 €
20+26,44 €
*This price is per unit and is the net value (not including taxes if applicable).

Related products

More info


Width6.2 mm
Height80 mm
Depth61 mm

Ambient conditions

Ambient temperature (operation)-20 °C ... 50 °C
Ambient temperature (storage/transport)-20 °C ... 70 °C

Coil side

Nominal input voltage UN24 V AC/DC
Input voltage range in reference to UN0.8 ... 1.1
Typical input current at UN6.5 mA
Typical response time5 ms
Typical release time15 ms
Protective circuitBridge rectifier Bridge rectifier
Operating voltage displayYellow LED
Power dissipation for nominal condition0.16 W

Contact side

Contact type1 N/O contact
Contact materialAgNi, hard gold-plated
Maximum switching voltage250 V AC
125 V DC
Minimum switching voltage0.1 V
Min. switching current1 mA
Maximum inrush current5 A
Limiting continuous current3 A (5 A up to 35°C at 24 V DC)
Interrupting rating (ohmic load) max.72 W (at 24 V DC)
60 W (at 48 V DC)
50 W (at 60 V DC)
50 W (at 110 V DC)
750 VA (for 250 V AC)
120 W (at 24 V DC - up to 35°)


Test voltage relay winding/relay contact2 kV AC (50 Hz, 1 min.)
Operating mode100% operating factor
Mechanical service lifeApprox. 2 x 107 cycles
Standards/regulationsIEC 60664
EN 50178
IEC 62103
Rated surge voltage/insulationBasic insulation
Pollution degree2
Overvoltage categoryIII
Mounting positionany
Assembly instructionsIn rows with zero spacing

Connection data input side

Connection nameCoil side
Connection methodScrew connection
Stripping length8 mm
Screw threadM3
Conductor cross section solid0.2 mm² ... 2.5 mm²
Conductor cross section flexible0.2 mm² ... 2.5 mm²
Conductor cross section AWG24 ... 14

Datasheet - PDF

PHOENIX CONTACT-2964131-DEK-REL- 24/1/SEnglish116 KbytesPHOENIX CONTACT-2964131-DEK-REL- 24/1/S

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
  Add review