EMG 22-REL/KSR-230/21 2952855 PHOENIX CONTACT Relay module, with soldered-in miniature switching relay, cont.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

EMG 22-REL/KSR-230/21 2952855 PHOENIX CONTACT Relay module, with soldered-in miniature switching relay, cont..

EMG 22-REL/KSR-230/21





Ship on today

Relay module, with soldered-in miniature switching relay, contact (AgNi): Medium to large loads, 1 PDT, input voltage 230 V AC/DC

More details

Programmable Logic Controllers Plcs

INTERFACE Signal converters, switching devices, and power supply units - PHOENIX CONTACT

INTERFACE Industrial Relays

* Brand new produt in its original packing covered by the warranties and certifications provided by PHOENIX_CONTACT

10+30,54 €
20+30,17 €
*This price is per unit and is the net value (not including taxes if applicable).

Related products

More info


Width22.5 mm
Height75 mm
Depth62.5 mm

Ambient conditions

Ambient temperature (operation)-20 °C ... 50 °C
Ambient temperature (storage/transport)-20 °C ... 70 °C

Coil side

Nominal input voltage UN230 V AC/DC
Input voltage range in reference to UN0.9 ... 1.06
Typical input current at UN5 mA
Typical response time8 ms
Typical release time10 ms
Protective circuitBridge rectifier Bridge rectifier
Varistor Varistor
Operating voltage displayYellow LED
Power dissipation for nominal condition1.15 W

Contact side

Contact typeSingle contact, 1-PDT
Contact materialAgNi
Maximum switching voltage250 V AC/DC
Maximum inrush current8 A
Limiting continuous current6 A
Interrupting rating (ohmic load) max.144 W (at 24 V DC)
58 W (at 48 V DC)
48 W (at 60 V DC)
50 W (at 110 V DC)
80 W (at 220 V DC)
1500 VA (for 250 V AC)


Test voltage relay winding/relay contact5 kVrms (50 Hz, 1 min.)
Test voltage relay contact/relay contact1 kV AC (50 Hz, 1 min.)
Operating mode100% operating factor
Degree of protectionIP20
Mechanical service lifeApprox. 5 x 107 cycles
Standards/regulationsEN 50178
Rated surge voltage/insulation4 kV / Basic isolation, (safe isolation, reinforced insulation and 6 kV between input circuit and output contact current paths.)
Rated insulation voltage260 V AC
Pollution degree2
Overvoltage categoryIII
Mounting positionany
Assembly instructionsIn rows with zero spacing

Connection data input side

Connection nameCoil side
Connection methodScrew connection
Stripping length8 mm
Screw threadM3
Conductor cross section solid0.2 mm² ... 4 mm²
Conductor cross section flexible0.2 mm² ... 2.5 mm²
Conductor cross section AWG24 ... 12

Datasheet - PDF

PHOENIX CONTACT-2952855-EMG 22-REL/KSR-230/21English107 KbytesPHOENIX CONTACT-2952855-EMG 22-REL/KSR-230/21

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
  Add review