PHOENIX CONTACT  ST-REL3-KG120/21/SO46 2833026 - Image 1

Images are for illustrative purposes only. Please refer to data sheet for details.

ST-REL3-KG120/21/SO46 2833026 PHOENIX CONTACT Plug-in relay interface for protection against interference on..

Reference: ST-REL3-KG120/21/SO46

Code: 2833026

Manufacturer: PHOENIX CONTACT

Description:

Plug-in relay interface for protection against interference on the control side, with soldered-in miniature switching relay, contacts (AgNi): Medium to large loads, 1 PDT, 120 V AC input voltage

Categories:

  • PHOENIX CONTACT > Industrial Relays

Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX CONTACT

  • More Info
  • PDF
  • Reviews
Guarantee, repair and return.

* This article may be obsolete. Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

LAST VIEWED

MORE INFO

Dimensions

Width20.8 mm
Height42.5 mm
Depth112 mm

Ambient conditions

Ambient temperature (operation)-20 °C ... 50 °C
Ambient temperature (storage/transport)-20 °C ... 70 °C

Coil side

Nominal input voltage UN120 V AC
Input voltage range in reference to UN0.85 ... 1.1
Typical input current at UN19 mA
Typical response time8 ms
Typical release time11 ms
Protective circuitBridge rectifier Bridge rectifier
Surge protection Varistor
RC element RC element
Operating voltage displayYellow LED

Contact side

Contact typeSingle contact, 1-PDT
Contact materialAgNi
Maximum switching voltage250 V AC/DC
Maximum inrush current8 A
Limiting continuous current6 A
Interrupting rating (ohmic load) max.95 W (at 24 V DC)
50 W (at 48 V DC)
45 W (at 60 V DC)
35 W (at 110 V DC)
55 W (at 220 V DC)
2000 VA (for 250 V AC)

General

Test voltage relay winding/relay contact2.5 kV AC (50 Hz, 1 min.)
Mechanical service lifeApprox. 2 x 107cycles
Standards/regulationsIEC 60664
EN 50178
IEC 62103
Rated surge voltage/insulationBasic insulation
Pollution degree2
Overvoltage categoryIII
Mounting positionany

Latest Customer Reviews

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.