QUINT-PS/48DC/24DC/ 5 2320144 PHOENIX CONTACT Primary-switched QUINT DC/DC converter for DIN rail mounting w.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

QUINT-PS/48DC/24DC/ 5 2320144 PHOENIX CONTACT Primary-switched QUINT DC/DC converter for DIN rail mounting w..

QUINT-PS/48DC/24DC/ 5

2320144

PHOENIX_CONTACT

Available Ship on today

Primary-switched QUINT DC/DC converter for DIN rail mounting with SFB (Selective Fuse Breaking) Technology, input: 48 V DC, output: 24 V DC/5 A

More details


Programmable Logic Controllers Plcs

INTERFACE Signal converters, switching devices, and power supply units - PHOENIX CONTACT

Power. Power Supply - PHOENIX CONTACT

* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT

Quantity Price
1+$287.72
2+$279.42
3+$275.45
4+$275.17
*This price is per unit and is the net value (not including taxes if applicable).

Related products

More info



Product description

QUINT DC/DC converter with maximum functionality

DC/DC converters alter the voltage level, regenerate the voltage at the end of long cables or enable the creation of independent supply systems by means of electrical isolation.

QUINT DC/DC converters magnetically and therefore quickly trip circuit breakers with six times the nominal current, for selective and therefore cost-effective system protection. The high level of system availability is additionally ensured, thanks to preventive function monitoring, as it reports critical operating states before errors occur.

Dimensions

Width32 mm
Height130 mm
Depth125 mm
Width with alternative assembly122 mm
Height with alternative assembly130 mm
Depth with alternative assembly35 mm

Ambient conditions

Degree of protectionIP20
Ambient temperature (operation)-25 °C ... 70 °C (> 60 °C Derating: 2,5 %/K)
Ambient temperature (storage/transport)-40 °C ... 85 °C
Max. permissible relative humidity (operation)≤ 95 % (at 25 °C, non-condensing)
Noise immunityEN 61000-6-2:2005

Input data

Nominal input voltage range48 V DC
Input voltage range30 V DC ... 60 V DC
Inrush surge current< 5 A (typical)
Power failure bypass> 14 ms (48 V DC)
Input fuse10 A (slow-blow, internal)
Choice of suitable circuit breakers10 A ... 16 A (Characteristics B, C, D, K)
Type of protectionTransient surge protection
Protective circuit/componentVaristor

Output data

Nominal output voltage24 V DC ±1 %
Setting range of the output voltage18 V DC ... 29.5 V DC (> 24 V DC, constant capacity restricted)
Nominal output current5 A (-25 °C ... 60 °C)
POWER BOOST6.25 A (-25°C ... 40°C permanent, UOUT = 24 V DC )
SFB technology current reserve30 A (12 ms)
Derating60 °C ... 70 °C (2.5%/K)
Connection in parallelYes, for redundancy and increased capacity
Connection in seriesYes
Max. capacitive loadUnlimited
Active current limitationApproximately 6.9 A
Control deviation< 1 % (change in load, static 10 % ... 90 %)
< 2 % (change in load, dynamic 10 % ... 90 %)
< 0.1 % (change in input voltage ±10 %)
Residual ripple< 25 mVPP
Peak switching voltages nominal load< 5 mVPP (20 MHz)
Maximum power dissipation in no-load condition2.7 W
Power loss nominal load max.11 W

General

Net weight0.7 kg
Efficiency> 91.5 %
Insulation voltage input/output1.5 kV (type test)
1 kV (routine test)
Protection classIII
MTBF (IEC 61709, SN 29500)> 995000 h (40°C)
Mounting positionhorizontal DIN rail NS 35, EN 60715
Assembly instructionsAlignable: 5 mm horizontally, 15 mm next to active components, 50 mm vertically

Connection data, input

Connection methodPluggable screw connection
Conductor cross section solid min.0.2 mm²
Conductor cross section solid max.2.5 mm²
Conductor cross section flexible min.0.2 mm²
Conductor cross section flexible max.2.5 mm²
Conductor cross section AWG min.24
Conductor cross section AWG max.12
Stripping length8 mm
Screw threadM3

Connection data, output

Connection methodPluggable screw connection
Conductor cross section solid min.0.2 mm²
Conductor cross section solid max.2.5 mm²
Conductor cross section flexible min.0.2 mm²
Conductor cross section flexible max.2.5 mm²
Conductor cross section AWG min.24
Conductor cross section AWG max.12
Stripping length7 mm
Screw threadM3

Signaling

Output nameDC OK active
Output descriptionUOUT > 0.9 x UN: High signal
Maximum inrush current< 20 mA (short-circuit resistant)
Status display"DC OK" LED green
Conductor cross section solid min.0.2 mm²
Conductor cross section solid max.2.5 mm²
Conductor cross section flexible min.0.2 mm²
Conductor cross section flexible max.2.5 mm²
Conductor cross section AWG min.24
Conductor cross section AWG max.12
Tightening torque, min0.5 Nm
Tightening torque max0.6 Nm
Screw threadM3
Output namePOWER BOOST, active
Output descriptionIOUT < IN: High signal
Maximum inrush current< 20 mA (short-circuit resistant)
Status display"BOOST" LED yellow/IOUT > IN : LED on
Output nameUIN OK, active
Output descriptionUIN > 38.4 V: high signal
Maximum inrush current< 20 mA (short-circuit resistant)
Status displayLED "UIN < 38.4 V" yellow/UIN < 38.4 V DC: LED on

Datasheet - PDF

Title: Language: Size: Type:
PHOENIX CONTACT-2320144-QUINT-PS/48DC/24DC/ 5 English 131 Kbytes PHOENIX CONTACT-2320144-QUINT-PS/48DC/24DC/ 5

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review

Últimas Opiniones de Nuestros Clientes

Todas las valoraciones que recibimos de los artículos que ofrecemos son reales y están verificadas. Un pequeño gesto, pero de mucho valor. Por eso, te agradecemos ese minuto que inviertes en dejarnos tu opinión y calificación sobre los productos, porque nos ayuda a seguir mejorando y a ofrecerte un servicio de todavía mayor calidad.