PSI-MODEM-SHDSL/PB 2313656 PHOENIX CONTACT Industrial PROFIBUS extender, for point-to-point connections, lin.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

PSI-MODEM-SHDSL/PB 2313656 PHOENIX CONTACT Industrial PROFIBUS extender, for point-to-point connections, lin..

PSI-MODEM-SHDSL/PB

2313656

PHOENIX_CONTACT

Available

Ship on today

Industrial PROFIBUS extender, for point-to-point connections, linear structures, and mixed operation with repeaters and fiber optic converters. Distances of up to 20 km, PROFIBUS data rates of up to 1.5 Mbps via simple copper wires, such as in-house phone lines.

More details


Converters

INTERFACE Signal converters, switching devices, and power supply units - PHOENIX CONTACT

Interface converter, separators and modems. Serial - PHOENIX CONTACT

* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT

*This price is per unit and is the net value (not including taxes if applicable).

Related products

More info



Dimensions

Width35 mm
Height99 mm
Depth114.5 mm

Ambient conditions

Ambient temperature (operation)-20 °C ... 60 °C (for derating, see technical documentation)
Ambient temperature (storage/transport)-40 °C ... 85 °C
Permissible humidity (operation)10 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)10 % ... 95 % (non-condensing)
Altitude5000 m (For restrictions see manufacturer's declaration)
Degree of protectionIP20

General

Electrical isolationDIN EN 50178 (VCC // PROFIBUS // DSL (A) // DSL (B) // FE)
Test voltage data interface/power supply1.5 kVrms (50 Hz, 1 min.)
Electromagnetic compatibilityConformance with EMC Directive 2004/108/EC (valid until 19.04.2016) / 2014/30/EU (valid from 20.04.2016)
Net weight282.3 g
Housing materialPA 6.6-FR
Colorgreen
MTBF1004 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day))
199 Years (Telcordia standard, 40°C temperature, 34.25% operating cycle (5 days a week, 12 hours a day))
MTTF800 Years (SN 29500 standard, temperature 25°C, operating cycle 21 % (5 days a week, 8 hours a day))
346 Years (SN 29500 standard, temperature 40 °C, operating cycle 34.25 % (5 days a week, 12 hours a day))
140 Years (SN 29500 standard, temperature 40°C, operating cycle 100 % (7 days a week, 24 hours a day))
ConformanceCE-compliant
ATEXEx II 3 G Ex nA IIC T4 Gc X (Please follow the special installation instructions in the documentation!)
UL, USA / CanadacULus listed UL 508

Power supply

Nominal supply voltage24 V DC ±5 % (as an alternative or redundant, via backplane bus contact and system current supply)
5 V DC (configuration only, via mini-USB type B)
Supply voltage range18 V DC ... 30 V DC
Typical current consumption< 180 mA (24 V DC)
Connection methodCOMBICON plug-in screw terminal block

Serial interface

Interface 1PROFIBUS acc. to IEC 61158, RS-485 2-wire, half duplex, automatic control
Operating modeSemi-duplex
Connection methodD-SUB-9 female connector
File format/codingUART (11 Bit, NRZ)
Data direction switchingAutomatic control
Transmission lengthmax. 1200 m (depending on the data rate, with shielded, twisted pair data cable)
Conductor cross section solid min.0.2 mm²
Conductor cross section solid max.2.5 mm²
Conductor cross section flexible min.0.2 mm²
Conductor cross section flexible max.2.5 mm²
Conductor cross section AWG min.24
Conductor cross section AWG max.13
Serial transmission speed9.6/19.2/45.45/93.75/187.5/500/1500 kbps, set via configuration software
Interface 2SHDSL interface according to ITU-T G.991.2.bis
Connection method2 x 2-pos. COMBICON plug-in screw terminal blocks
Transmission lengthup to 20 km (Depending on data rate and cable cross section)
Serial transmission speed4-wire operation: 64 kbps ... 30 Mbps
2-wire operation: 32 kbps ... 15.3 Mbps
Interface 3USB 2.0
Connection methodMini-USB type B, 5-pos.
Transmission length< 5 m (only for configuration and diagnostics)

Function

ManagementUser-friendly software: Guided configuration, plausibility checks, diagnostic functions, log book
Status and diagnostic indicatorsLEDs: VCC (supply voltage), RD/TD (PROFIBUS data traffic), ERR (errors)2 x LINK / 2 x STAT (DSL data traffic port A and port B), DIAG (diagnostic messages)

Digital outputs

Output nameDigital output
Number of outputs2
Voltage output signaldepending on the operating voltage
Current output signal≤ 150 mA (Short-circuit-proof)
Behavior of the outputsDeactivated for device supply via T-BUS

Datasheet - PDF

Title: Language: Size: Type:
PHOENIX CONTACT-2313656-PSI-MODEM-SHDSL/PB English 359 Kbytes PHOENIX CONTACT-2313656-PSI-MODEM-SHDSL/PB

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review

Latest Customer Reviews

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.