No products
Product successfully added to your shopping cart
View larger
PT 2-PE/S-120AC/FM 2856812 PHOENIX CONTACT Type 3 surge protection device
PT 2-PE/S-120AC/FM
2856812
PHOENIX_CONTACT
Type 3 surge protection device
Pluggable type 3 arrester (device protection) for single-phase power supply networks with separate N and PE (3-conductor system: L1, N, PE) with remote indication contact.
Home > PHOENIX CONTACT
Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
Best sellers
▲More info
▲| Product type | Device protection |
| Type | DIN rail module, two-section, divisible |
| Surge protection fault message | Optical, remote indicator contact |
| Insulation characteristics | |
| Overvoltage category | III |
| Pollution degree | 2 |
| Arrester can be tested with CHECKMASTER from software version: | From SW rev. 1.00 |
| IEC test classification | III |
| EN type | T3 |
| Indicator/remote signaling | |
| Connection name | Remote fault indicator contact |
| Switching function | N/C contact |
| Maximum operating voltage Umax.AC | 250 V |
| Maximum operating voltage UmaxDC | 50 V |
| Max. operating current Imax | 3 A AC |
| Connection method | Screw connection |
| Screw thread | M3 |
| Tightening torque, min | 0.8 Nm |
| Conductor cross section flexible min. | 0.2 mm² |
| Conductor cross section flexible max. | 2.5 mm² |
| Conductor cross section, rigid min. | 0.2 mm² |
| Conductor cross section, rigid max. | 4 mm² |
| Dimensional drawing |  |
| Width | 17.7 mm |
| Height | 90 mm |
| Depth | 65.5 mm |
| Horizontal pitch | 1 Div. |
| Complete module width | 17.7 mm |
| Complete module height | 90 mm |
| Complete module depth | 65.5 mm |
| Flammability rating according to UL 94 | V0 |
| Housing material | PA |
| Direction of action | 1L-N & N-PE |
| Nominal frequency fN | 50 Hz |
| 60 Hz | |
| Maximum continuous voltage UC | 150 V AC |
| Rated load current IL | 26 A (30 °C) |
| Residual current IPE | ≤ 1.5 µA |
| Standby power consumption PC | ≤ 200 mVA |
| Operating effective current ICat UC | ≤ 1.1 mA |
| Nominal discharge current In(8/20) µs | 2.5 kA |
| 3 kA (in acc. with UL 1449) | |
| Voltage protection level Up(L-N) | ≤ 620 V |
| Voltage protection level Up(L-PE) | ≤ 850 V |
| Voltage protection level Up(N-PE) | ≤ 850 V |
| Response time tA(L-N) | ≤ 25 ns |
| Response time tA(L-PE) | ≤ 100 ns |
| Max. required back-up fuse | 25 A (gL/C) |
| Ambient conditions | |
| Degree of protection | IP20 |
| Ambient temperature (operation) | -40 °C ... 85 °C |
| Air clearances and creepage distances | |
| Standards/regulations | DIN VDE 0110-1 / IEC 60664-1 / DIN VDE 0675-6 / IEC 61643-1 |
| Standards | |
| Standards/regulations | IEC 61643-1 |
| EN 61643-11/A11 | |
| NF C61-740 | |
| IEC 61643-1 | |
| EN 61643-11/A11 | |
| UL 1449 | |
| NF C61-740 | |
| Standards/specifications | IEC 61643-1 |
| Note | 2005 |
| Standards/specifications | EN 61643-11/A11 |
| Note | 2007 |
| Standards/specifications | UL 1449 |
| Standards/specifications | NF C61-740 |
| Mounting type | DIN rail: 35 mm |
Datasheet - PDF
▲| Title: | Size: | Type: |
|---|---|---|
| Datasheet 1: 2856812 - PT 2-PE/S-120AC/FM | 182 Kbytes |
 |
| Complete catalogue 1: 2856812 - PT 2-PE/S-120AC/FM | 12 Mbytes |
|
Reviews (0) ▲
No customer reviews for the moment.
| Rating: |
|
| Name: | |
| Email: | |
| Subject: | |
| Text: | |
| Do you recommend this product to buy? | |
|
|
|
| Add review | |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.