Product successfully added to your shopping cart
PLC-RSC-230UC/ 1AU/SEN
2966333
PHOENIX_CONTACT
1
Relay Module
INTERFACE Components (IF)
* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
Thank you for your interest in our products; we hope the delivery time indicated is to your convenience.
While the order is being processed you can select the type of shipment that best suits your needs: 24-hour air express, standard 48-72 hour land, etc.
Orderkey | 2966333 |
---|---|
Packing unit | 10 pc |
Catalog page | Page 384 (C-5-2017) |
GTIN | 4017918130763 |
Weight per Piece (excluding packing) | 33.600 g |
Custom tariff number | 85364900 |
Country of origin | DE (Germany) |
Utilization restriction | EMC: class A product, see manufacturer's declaration in the download area |
---|
Ambient temperature (operation) | -40 °C ... 55 °C |
---|---|
Ambient temperature (storage/transport) | -40 °C ... 85 °C |
Nominal input voltage UN | 230 V AC |
---|---|
220 V DC | |
Typical input current at UN | 3.2 mA |
Typical response time | 7 ms |
Typical release time | 15 ms |
Protective circuit | Bridge rectifier Bridge rectifier |
Operating voltage display | Yellow LED |
Power dissipation for nominal condition | 0.74 W |
Contact type | 1 N/O contact |
---|---|
Type of switch contact | Single contact |
Contact material | AgSnO, hard gold-plated |
Maximum switching voltage | 30 V AC |
36 V DC | |
Minimum switching voltage | 100 mV (at 10 mA) |
Min. switching current | 1 mA (at 24 V) |
Maximum inrush current | 50 mA |
Limiting continuous current | 50 mA |
Interrupting rating (ohmic load) max. | 1 W (at 24 V DC) |
Note | the following values are applicable if a gold layer is destroyed |
---|---|
Maximum switching voltage | 250 V AC/DC |
Minimum switching voltage | 5 V (at 100 mA) |
Limiting continuous current | 6 A |
Min. switching current | 10 mA (at 12 V) |
Interrupting rating (ohmic load) max. | 140 W (at 24 V DC) |
20 W (at 48 V DC) | |
18 W (at 60 V DC) | |
23 W (at 110 V DC) | |
40 W (at 220 V DC) | |
1500 VA (for 250 V AC) | |
Switching capacity | 2 A (at 24 V, DC13) |
0.2 A (at 110 V, DC13) | |
0.1 A (at 220 V, DC13) | |
3 A (at 24 V, AC15) | |
3 A (at 120 V, AC15) | |
3 A (at 230 V, AC15) |
Connection name | Coil side |
---|---|
Connection method | Screw connection |
Stripping length | 8 mm |
Screw thread | M3 |
Conductor cross section solid | 0.14 mm² ... 2.5 mm² |
Conductor cross section flexible | 0.14 mm² ... 2.5 mm² |
0.2 mm² ... 2.5 mm² () | |
2x 0.5 mm² ... 1.5 mm² () | |
Conductor cross section AWG | 26 ... 14 |
Connection name | Contact side |
---|---|
Connection method | Screw connection |
Stripping length | 8 mm |
Screw thread | M3 |
Conductor cross section solid | 0.14 mm² ... 2.5 mm² |
Conductor cross section flexible | 0.14 mm² ... 2.5 mm² |
0.2 mm² ... 2.5 mm² () | |
2x 0.5 mm² ... 1.5 mm² () | |
Conductor cross section AWG | 26 ... 14 |
Test voltage relay winding/relay contact | 4 kV AC (50 Hz, 1 min.) |
---|---|
Operating mode | 100% operating factor |
Degree of protection | IP20 (Relay base) |
Mechanical service life | 2x 107cycles |
Mounting position | any |
Assembly instructions | In rows with zero spacing |
Net weight (SAP) | 33.6 g |
Connection in acc. with standard | CUL |
---|---|
Designation | Standards/regulations |
Standards/regulations | IEC 60664 |
EN 50178 | |
Degree of pollution | 3 |
Overvoltage category | III |
Flammability rating according to UL 94 | V0 |
China RoHS | Environmentally Friendly Use Period = 50 |
---|---|
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
Title: | Size: | Type: |
---|---|---|
PDF CATALOG PHOENIX INTERFACE TECHNOLOGY AND SWITCHING DEVICES EN.pdf | 27 Mbytes | |
PHOENIX CONTACT-2966333-PLC-RSC-230UC/ 1AU/SEN | 146 Kbytes |
No customer reviews for the moment.
Rating: | |
Name: | |
Email: | |
Subject: | |
Text: | |
Do you recommend this product to buy? | |
Add review |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.