Product successfully added to your shopping cart
PLC-RPT- 60DC/21
2900303
PHOENIX_CONTACT
1
PLC-INTERFACE, consisting of PLC-BPT.../21 basic terminal block with push-in technology and plug-in miniature relay with power contact, for mounting on NS 35/7,5 DIN rails, 1 PDT, input voltage: 60 V DC
INTERFACE Components (IF)
* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
Thank you for your interest in our products; we hope the delivery time indicated is to your convenience.
While the order is being processed you can select the type of shipment that best suits your needs: 24-hour air express, standard 48-72 hour land, etc.
Width | 6.2 mm |
---|---|
Height | 80 mm |
Depth | 94 mm |
Ambient temperature (operation) | -40 °C ... 60 °C |
---|---|
Ambient temperature (storage/transport) | -40 °C ... 85 °C |
Nominal input voltage UN | 60 V DC |
---|---|
Typical input current at UN | 4.8 mA |
Typical response time | 5 ms |
Typical release time | 8 ms |
Protective circuit | Protection against polarity reversal Polarity protection diode |
Free-wheeling diode Damping diode | |
Operating voltage display | yes |
Power dissipation for nominal condition | 0.29 W |
Contact type | 1 PDT |
---|---|
Contact material | AgSnO |
Maximum switching voltage | 250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...) |
Minimum switching voltage | 5 V (at 100 mA) |
Min. switching current | 10 mA (at 12 V) |
Maximum inrush current | on request |
Limiting continuous current | 6 A |
Interrupting rating (ohmic load) max. | 140 W (at 24 V DC) |
20 W (at 48 V DC) | |
18 W (at 60 V DC) | |
23 W (at 110 V DC) | |
40 W (at 220 V DC) | |
1500 VA (for 250 V AC) | |
Switching capacity in acc. with DIN VDE 0660/IEC 60947 | 2 A (at 24 V, DC13) |
0.2 A (at 110 V, DC13) | |
0.1 A (at 220 V, DC13) | |
3 A (at 24 V, AC15) | |
3 A (at 120 V, AC15) | |
3 A (at 230 V, AC15) |
Test voltage relay winding/relay contact | 4 kV AC (50 Hz, 1 min.) |
---|---|
Operating mode | 100% operating factor |
Degree of protection | RT III (Relay) |
Mechanical service life | 2 x 107cycles |
Flammability rating according to UL 94 | V0 |
Designation | Standards/regulations |
Standards/regulations | IEC 60664 |
IEC 60664 A | |
DIN VDE 0110 | |
DIN EN 50178/DIN VDE 0160 (in relevant parts) | |
DIN EN 50178/VDE 0160 | |
IEC 60255/DIN VDE 0435 (in relevant parts) | |
Pollution degree | 3 |
Overvoltage category | III |
Mounting position | any |
Assembly instructions | In rows with zero spacing |
Connection name | Coil side |
---|---|
Connection method | Push-in connection |
Stripping length | 8 mm |
Conductor cross section solid | 0.14 mm² ... 2.5 mm² |
Conductor cross section flexible | 0.14 mm² ... 2.5 mm² |
Conductor cross section AWG | 26 ... 14 |
Title: | Size: | Type: |
---|---|---|
PDF CATALOG PHOENIX INTERFACE TECHNOLOGY AND SWITCHING DEVICES EN.pdf | 27 Mbytes | |
PHOENIX CONTACT-2900303-PLC-RPT- 60DC/21 | 158 Kbytes |
No customer reviews for the moment.
Rating: | |
Name: | |
Email: | |
Subject: | |
Text: | |
Do you recommend this product to buy? | |
Add review |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.