Product successfully added to your shopping cart
PLC-OPT-24DC/48DC/100/V8C/SEN
2904693
PHOENIX_CONTACT
1
PLC-INTERFACE for input functions with PLC logic, with push-in connection and plug-in miniature solid-state relay, for mounting on DIN rail NS 35/7,5, 1 N/O contact, input: 24 V DC, output: 3 - 48 V DC/100 mA
INTERFACE Components (IF)
* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
Thank you for your interest in our products; we hope the delivery time indicated is to your convenience.
While the order is being processed you can select the type of shipment that best suits your needs: 24-hour air express, standard 48-72 hour land, etc.
Width | 6.2 mm |
---|---|
Height | 80 mm |
Depth | 94 mm |
Ambient temperature (operation) | -25 °C ... 60 °C |
---|---|
Ambient temperature (storage/transport) | -25 °C ... 70 °C |
Nominal input voltage UN | 24 V DC |
---|---|
Input voltage range in reference to UN | 0.8 ... 1.2 |
Switching threshold "0" signal in reference to UN | ≤ 0.4 |
Switching threshold "1" signal in reference to UN | ≥ 0.8 |
Typical input current at UN | 8.5 mA |
Typical response time | 20 µs (at UN) |
Typical turn-off time | 300 µs (at UN) |
Operating voltage display | Yellow LED |
Type of protection | Protection against polarity reversal |
Free-wheeling diode | |
Protective circuit/component | Polarity protection diode |
Damping diode | |
Transmission frequency | 300 Hz |
Output voltage range | 3 V DC ... 48 V DC |
---|---|
Limiting continuous current | 100 mA |
Voltage drop at max. limiting continuous current | ≤ 1 V |
Output circuit | 2-wire, floating |
Type of protection | Protection against polarity reversal |
Surge protection | |
Protective circuit/component | Polarity protection diode |
Connection name | Input side |
---|---|
Connection method | Push-in connection |
Stripping length | 8 mm |
Conductor cross section solid | 0.14 mm² ... 2.5 mm² |
Conductor cross section flexible | 0.14 mm² ... 2.5 mm² |
Conductor cross section AWG | 26 ... 14 |
Test voltage input/output | 2.5 kV (50 Hz, 1 min.) |
---|---|
Mounting position | any |
Assembly instructions | In rows with zero spacing |
Operating mode | 100% operating factor |
Flammability rating according to UL 94 | V0 |
Designation | Standards/regulations |
Standards/regulations | IEC 60664 |
EN 50178 | |
IEC 62103 | |
Rated surge voltage/insulation | Basic insulation |
Pollution degree | 2 |
Overvoltage category | III |
Title: | Size: | Type: |
---|---|---|
PDF CATALOG PHOENIX INTERFACE TECHNOLOGY AND SWITCHING DEVICES EN.pdf | 27 Mbytes | |
PHOENIX CONTACT-2904693-PLC-OPT-24DC/48DC/100/V8C/SEN | 111 Kbytes |
No customer reviews for the moment.
Rating: | |
Name: | |
Email: | |
Subject: | |
Text: | |
Do you recommend this product to buy? | |
Add review |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.