PHOENIX CONTACT  IB IL DO 4 AC-1A-PAC 2861658 - Image 1

Images are for illustrative purposes only. Please refer to data sheet for details.

IB IL DO 4 AC-1A-PAC 2861658 PHOENIX CONTACT Inline terminal

Reference: IB IL DO 4 AC-1A-PAC

Code: 2861658

Manufacturer: PHOENIX CONTACT

Description:

Inline terminal

Categories:

  • PHOENIX CONTACT > I/O

Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX CONTACT

  • More Info
  • PDF
  • Reviews
Guarantee, repair and return.

* This article may be obsolete. Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

LAST VIEWED

MORE INFO

Key Commercial Data

Orderkey2861658
Packing unit1 pc
Catalog pagePage 156 (C-6-2017)
GTIN4017918894498
Weight per Piece (excluding packing)130.000 g
Custom tariff number85389091
Country of originDE (Germany)

Note

Utilization restriction1

Dimensions

Dimensional drawing
Width48.8 mm
Height119.8 mm
Depth71.5 mm
Note on dimensionsHousing dimensions

Ambient conditions

Ambient temperature (operation)-25 °C ... 55 °C
Ambient temperature (storage/transport)-25 °C ... 85 °C
Permissible humidity (operation)75 % ... 85 % (in the range of -25°C ... +55°C, appropriate measures against increased humidity (> 85%) must be taken.)
Permissible humidity (storage/transport)75 % ... 85 % (slight temporary condensation may sometimes appear on the housing)
Air pressure (operation)70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)70 kPa ... 106 kPa (up to 3000 m above sea level)
Degree of protectionIP20

General

Mounting typeDIN rail
Net weight130 g
Note on weight specificationswithout plug

Interfaces

DesignationInline local bus
No. of channels2
Connection methodInline data jumper
Transmission speed500 kbps

Inline potentials

DesignationCommunications power (UL)
Supply voltage7.5 V DC (via voltage jumper)
Current consumptionmax. 45 mA
DesignationI/O supply
Supply voltage230 V AC (via voltage jumper)
Current consumptionmax. 4 A

Digital outputs

Output nameDigital outputs
Connection methodSpring-cage connection
Connection technology3-wire
Number of outputs4
Type of protectionOverload protection, short-circuit protection of outputs
Nominal output voltage230 V AC
Maximum output current per channel1 A
Maximum output current per module4 A

Electrical isolation

Test section5 V supply, incoming remote bus/7.5 V supply (bus logics) 500 V AC 50 Hz 1 min.
5 V supply, outgoing remote bus/7.5 V supply (bus logics) 500 V AC 50 Hz 1 min.
7.5 V supply (bus logics) / I/O area 2500 V AC 50 Hz 1 min.
Routine test 1200 V AC 50 Hz 1 min.
I/O area / FE 500 V AC 50 Hz 1 min.
Output / Phase 500 V AC 50 Hz 1 min.

Standards and Regulations

Protection classIII, IEC 61140, EN 61140, VDE 0140-1

Environmental Product Compliance

China RoHSEnvironmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values

Classifications

Latest Customer Reviews

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.