IBS CMD SWT G4 UPD
Available Ship on today
Network configuration software update for INTERBUS Generation 4
AUTOMATION Industrial Automation - PHOENIX CONTACT
* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
As a result of manufacturer independence, a bus system for open, flexible control architectures must provide the user with a concept for a universal and, above all, manufacturer-independent operation and diagnostics of a system. The configuration, system startup and diagnostic software CMD (Configuration Monitoring Diagnostics) has been developed for INTERBUS. The most important features of this software are the independence from the control system used and the flexibility with respect to program expansions, new functions and add-on programs. The DRIVE-COM User Group, for example, offers add-on programs for parameterizing drives according to the DRIVECOM profile.
In order to meet the requirements of users, our INTERBUS expertise continues to improve its software capabilities.
CMD for all phases:
CMD is a tool used throughout the entire lifecycle of a plant, from planning and configuration, through system startup to operation monitoring, and finally diagnostics in the event of maintenance. For the user this eliminates the costs and effort of learning to use several software tools.
The CMD software allows the user to determine the configuration of the INTERBUS system during the configuration phase. The I/O points can be assigned logical addresses or variables, through which the control program will later access the distributed I/O.
During system startup, a functional test of the system can be performed using an integrated monitor function.
The diagnostic functions continuously provide detailed information on the bus status, indicate the causes for any errors, and suggest remedies.
CMD for globally established operating systems:
CMD can now be run under Windows operating systems for any standard PC system. The familiar interface facilitates learning to use the software, and thus learning to use the entire INTERBUS system.
|Number of I/O nodes||not relevant|
|Basic functions||Executing important commands (start/stop/...)|
|Reading in the installed bus structure|
|Detecting/representing error states (plain text from knowledge database)|
|Saving diagnostics data in flash memory or parameterizing memory of the controller board|
|Diagnostics of INTERBUS FO paths (transmission quality)|
|Can be linked into other 32-bit applications as ActiveX Control including programming interface for further processing of all diagnostic data|
|Configuration comparison of Ethernet topologies (parameterized with real topology)|
|Reading out the Controller Diagnose Archive|
|Supported controllers||INTERBUS Generation 4 controller board|
|Hard disk||62 Mbyte|
|Note on the main memory||16 MB or more recommended|
|CPU||Min. 80486/ 33 MHz|
|Interfaces||Free serial interface for online connection|
|Monitor resolution||SVGA mit min. 800 x 600|
|Operating systems||MS Windows® NT 4.0 SP6|
|MS Windows® 2000|
|MS Windows® XP|
|PHOENIX CONTACT-2721523-IBS CMD SWT G4 UPD||English||107 Kbytes|
No customer reviews for the moment.
Todas las valoraciones que recibimos de los artículos que ofrecemos son reales y están verificadas. Un pequeño gesto, pero de mucho valor. Por eso, te agradecemos ese minuto que inviertes en dejarnos tu opinión y calificación sobre los productos, porque nos ayuda a seguir mejorando y a ofrecerte un servicio de todavía mayor calidad.