FLM DIO 16/16 M12/8-DIAG 2736738 PHOENIX CONTACT Distributed I/O device View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

FLM DIO 16/16 M12/8-DIAG 2736738 PHOENIX CONTACT Distributed I/O device

FLM DIO 16/16 M12/8-DIAG

2736738

PHOENIX_CONTACT

Distributed I/O device

More details


I/O

* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT

* This article may be obsolete. Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

If our price is not the best, please ask us for a quote. Ask for a quotation

More info



Key Commercial Data

Orderkey2736738
Packing unit1 pc
Catalog pagePage 213 (C-6-2017)
GTIN4046356042642
Weight per Piece (excluding packing)400.000 g
Custom tariff number85176200
Country of originDE (Germany)

Note

Utilization restriction1

Dimensions

Dimensional drawing
Width70 mm
Height178 mm
Depth50 mm
Drill hole spacing168 mm

Ambient conditions

Ambient temperature (operation)-25 °C ... 60 °C
Ambient temperature (storage/transport)-25 °C ... 85 °C
Permissible humidity (storage/transport)95 %
Air pressure (operation)80 kPa ... 106 kPa (up to 2000 m above sea level)
Air pressure (storage/transport)70 kPa ... 106 kPa (up to 3000 m above sea level)
Degree of protectionIP65/IP67

General

Mounting typeWall mounting
Net weight400 g

Interfaces

DesignationFieldline local bus
Connection methodM12 connector, B-coded
Designation connection pointCopper cable
Transmission speed500 kbps / 2 Mbps
Number of positions5

Power supply for module electronics

Connection methodM12 connector
DesignationUL
Supply voltage24 V DC
Supply voltage range18 V DC ... 30 V DC (including ripple)

Fieldline potentials

Voltage supply UL24 V DC
Power supply at ULmax. 4 A
Current consumption from ULmax. 100 mA (At 2 Mbaud)
typ. 80 mA (At 2 Mbaud)
max. 75 mA (At 500 kBaud)
typ. 60 mA (At 500 kBaud)
Voltage supply US24 V DC
Power supply at USmax. 4 A
Current consumption from UStyp. 20 mA (plus power supply for sensors)
max. 1.2 A
max. 1.2 A
Voltage supply UA1124 V DC
Power supply at UA11max. 4 A
Current consumption at UA11typ. 15 mA
max. 4 A
Voltage supply UA1224 V DC
Power supply at UA12max. 4 A
Current consumption at UA12typ. 15 mA
max. 4 A

Digital inputs

Input nameDigital inputs
Description of the inputIEC 61131-2 type 1
Connection methodM12 connector, 8-pos.
Connection technology2, 3-wire
Number of inputs16
Type of protectionShort-circuit protection, overload protection of the sensor supply
Filter time3 ms
Input voltage24 V DC
Input voltage range "0" signal-30 V DC ... 5 V DC
Input voltage range "1" signal13 V DC ... 30 V DC
Delay at signal change from 0 to 13 ms
Delay at signal change from 1 to 03 ms

Digital outputs

Output nameDigital outputs
Connection methodM12 connector, 8-pos.
Connection technology2-wire
Number of outputs16
Type of protectionShort-circuit protection, overload protection of the sensor supply
Maximum output current per channel500 mA

Electrical isolation

Test sectionTo I/O 500 V DC 1 min.

Standards and Regulations

Protection classIII, IEC 61140, EN 61140, VDE 0140-1

Environmental Product Compliance

REACh SVHCLead 7439-92-1
China RoHSEnvironmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values

Classifications

Datasheet - PDF

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.