Cart
0
Product
Products
(empty)
No products
$0.00
Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart.
There is 1 item in your cart.
Total products
Total
View larger
MACX MCR-SL-NAM-2RO 2865010 PHOENIX CONTACT Isolation amplifier
MACX MCR-SL-NAM-2RO
2865010
PHOENIX_CONTACT
Isolation amplifier
NAMUR separation amplifier for the operation of proximity detectors and switches. The signals are transmitted to the control level via 2 separate relay outputs (normally open contact). Cable Fault Detection (LFD), Galvanic 3-Way Spacing, SIL 2, Screw Connection.
Sensors > NAMUR switching amplifier
INTERFACE Components (IF)
Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
Related products
▲Best sellers
▲More info
▲Key Commercial Data
| Orderkey | 2865010 |
|---|---|
| Packing unit | 1 pc |
| Catalog page | Page 133 (C-5-2017) |
| GTIN | 4046356491686 |
| Weight per Piece (excluding packing) | 140.000 g |
| Custom tariff number | 85437090 |
| Country of origin | DE (Germany) |
Ambient conditions
| Ambient temperature (operation) | -20 °C ... 60 °C (Any mounting position) |
|---|---|
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Maximum altitude | ≤ 2000 m |
| Permissible humidity (operation) | 10 % ... 95 % (non-condensing) |
| Noise immunity | EN 61000-6-2 EN 61326 |
Input data
| Non-load voltage | ~ 8 V DC |
|---|---|
| Switching points (attenuated) | < 1.2 mA (blocking) |
| Switching points (unattenuated) | > 2.1 mA (conductive) |
| Available input sources | NAMUR proximity sensors (EN 60947-5-6) |
| Short-circuit current | ~ 8 mA |
| Switching hysteresis | < 0.2 mA |
| Line fault detection | Break 0.05 mA < IIN < 0.35 mA |
| Short circuit 100 Ω < RSensor < 360 Ω |
Output data
| Switching output | Relay output |
|---|---|
| Contact type | 2 N/O contacts |
| Contact material | AgSnO2, hard gold-plated |
| Maximum switching voltage | 250 V AC (2 A) |
| 120 V DC (0.2 A) | |
| 30 V DC (2 A) | |
| Maximum switching capacity | 500 VA |
| Mechanical service life | 107cycles |
| Switching frequency | ≤ 20 Hz (without load) |
Power supply
| Nominal supply voltage | 24 V DC |
|---|---|
| Supply voltage range | 19.2 V DC ... 30 V DC (24 V DC -20%...+25%) |
| Max. current consumption | 30 mA (24 V DC) |
| Power dissipation | < 950 mW |
| Power consumption | < 950 mW |
Connection data
| Conductor cross section solid min. | 0.2 mm² |
|---|---|
| Conductor cross section solid max. | 2.5 mm² |
| Conductor cross section flexible min. | 0.2 mm² |
| Conductor cross section flexible max. | 2.5 mm² |
| Conductor cross section AWG min. | 24 |
| Conductor cross section AWG max. | 14 |
| Stripping length | 7 mm |
| Screw thread | M3 |
| Connection method | Screw connection |
| Tightening torque, min | 0.5 Nm |
| Tightening torque max | 0.6 Nm |
General
| No. of channels | 1 |
|---|---|
| Status display | Green LED (supply voltage) |
| LED yellow (switching state) | |
| Red LED (line errors) | |
| Flammability rating according to UL 94 | V0 |
| Degree of pollution | 2 |
| Overvoltage category | III |
| Electromagnetic compatibility | Conformance with EMC directive |
| Interference emission | EN 61000-6-4 |
| Housing material | PA 6.6-FR |
| Color | gray |
| Designation | Input/supply, DIN rail connector |
| Electrical isolation | 300 Vrms(Rated insulation voltage (overvoltage category II; degree of pollution 2, safe isolation as per EN 61010-1)) |
| Designation | Output 1/output 2/input, power supply, DIN rail connector |
| Electrical isolation | 300 Vrms(Rated insulation voltage (overvoltage category III; degree of pollution 2, safe isolation as per EN 61010-1)) |
| Designation | Output 1/output 2/input/power supply, DIN rail connector |
| Electrical isolation | 2.5 kV (50 Hz, 1 min., test voltage) |
| Conformance | CE-compliant, additionally EN 61326-1 |
| ATEX | II 3 G Ex nA nC IIC T4 Gc X |
| UL, USA/Canada | UL 508 Listed |
| UL 61010 Listed | |
| Class I, Div. 2, Groups A, B, C, D T4 | |
| Class I, Zone 2, Group IIC T4 | |
| SIL | 2 |
Safety characteristic data
| Integrity requirement | IEC 61508 - Low demand |
|---|---|
| Designation | Non-inverted operation |
| Equipment type | Type A |
| Safety Integrity Level (SIL) | 2 |
| Safe Failure Fraction (SFF) | 78 % |
| λSU | 2.49 x 10-7(249 FIT) |
| λSD | 6 x 10-9(6 FIT) |
| λDU | 6.4 x 10-8(64 FIT) |
| λDD | 7 x 10-9(7 FIT) |
| Probability of a hazardous failure on demand (PFDAVG) | 3.09 x 10-4(1 year) |
| 6.17 x 10-4(2 years) | |
| 1.54 x 10-3(5 years) | |
| Diagnostic coverage (DC) | DCS= 2.4 %, DCD= 9 % |
| Integrity requirement | IEC 61508 - Low demand |
| Designation | Inverted operation |
| Equipment type | Type A |
| Safety Integrity Level (SIL) | 2 |
| Safe Failure Fraction (SFF) | 78 % |
| λSU | 2.48 x 10-7(248 FIT) |
| λSD | 1 x 10-9(1 FIT) |
| λDU | 6.2 x 10-8(62 FIT) |
| λDD | 6 x 10-9(6 FIT) |
| Probability of a hazardous failure on demand (PFDAVG) | 3.01 x 10-4(1 year) |
| 6.02 x 10-4(2 years) | |
| 1.5 x 10-3(5 years) | |
| Diagnostic coverage (DC) | DCS= 0.4 %, DCD= 8 % |
| Safety Integrity Level (SIL) | 1 |
Standards and Regulations
| Electromagnetic compatibility | Conformance with EMC directive |
|---|---|
| Noise emission | EN 61000-6-4 |
| Flammability rating according to UL 94 | V0 |
| Conformance | CE-compliant, additionally EN 61326-1 |
| ATEX | II 3 G Ex nA nC IIC T4 Gc X |
| UL, USA/Canada | UL 508 Listed |
| UL 61010 Listed | |
| Class I, Div. 2, Groups A, B, C, D T4 | |
| Class I, Zone 2, Group IIC T4 | |
| DNV GL-Temperature | B |
| DNV GL-Humidity | B |
| DNV GL-Vibration | A |
| DNV GL-EMC | B |
| DNV GL-Enclosure | Required protection according to the Rules shall be provided upon installation on board |
Environmental Product Compliance
| China RoHS | Environmentally Friendly Use Period = 50 |
|---|---|
| For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
Classifications
eCl@ss 4.027210121eCl@ss 4.127210121eCl@ss 5.027210121eCl@ss 5.127210121eCl@ss 6.027210121eCl@ss 7.027210121eCl@ss 8.027210121eCl@ss 9.027210121
| Feature Name | Feature Value |
|---|---|
| Type of power supply (EF001469) | Other |
| Rated supply voltage DC (EF007078) | 19.2 V |
| Number of inputs according to NAMUR (EF006886) | 1 |
| Number of inputs, potential-free (EF006887) | 1 |
| Switching voltage (EF003586) | 250 V |
| Switching power (EF001313) | 500 VA |
| Number of channels (EF000259) | 1 |
| Number of output circuits relays normally open contact (EF006992) | 2 |
| Number of output circuits relays change-over contact (EF006993) | 0 |
| Number of output circuits transistor potential-free (EF006997) | 0 |
| Number of output circuits transistor pnp (EF006996) | 0 |
| Number of output circuits transistor npn (EF006995) | 0 |
| Number of output circuits transistor antivalent (EF006994) | 0 |
| Number of output circuits opto-coupler (EF006991) | 0 |
| Malfunction message output (EF007499) | No |
| Inherently safe according to EN 60947-5-6 NAMUR (EF007112) | No |
| Galvanic separation between inputs (EF007224) | No |
| Galvanic separation between input and output (EF007223) | Yes |
| Galvanic separation between output to output (EF007222) | Yes |
| Galvanic separation between supply voltage and all other current circuits (EF007225) | Yes |
| Suitable for safety functions (EF001597) | Yes |
| Performance level according to EN ISO 13849-1 (EF007399) | None |
| Width (EF000008) | 12.5 mm |
| Height (EF000040) | 112.5 mm |
| Power consumption (EF000346) | 0.95 W |
| Operating temperature (EF002393) | -40 °C |
| Construction type of device (EF007276) | Built-in device |
| Type of electric connection (EF003961) | Screw connection |
| Mounting method (EF000003) | Other |
| Depth (EF000049) | 113.7 mm |
| Degree of protection (IP) (EF005474) | IP20 |
Datasheet - PDF
▲| Title: | Size: | Type: |
|---|---|---|
| PDF CATALOG PHOENIX INTERFACE TECHNOLOGY AND SWITCHING DEVICES EN.pdf | 29 Mbytes |
|
| PHOENIX CONTACT-2865010-MACX MCR-SL-NAM-2RO | 142 Kbytes |
|
Reviews (0) ▲
No customer reviews for the moment.
Add Review
hide form
| Rating: |
|
| Name: | |
| Email: | |
| Subject: | |
| Text: | |
| Do you recommend this product to buy? | |
|
|
|
| Add review | |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.