Sign in

INTERFACE Components (IF)

Interface Components (IF) are essential electromechanical and electronic devices designed to bridge control signals between different voltage levels, current ratings, and signal types in industrial automation systems. These components include interface relays, optocouplers, signal conditioners, and isolation amplifiers, typically featuring coil ...
PDF CATALOG PHOENIX INTERFACE TECHNOLOGY AND SWITCHING DEVICES ENPDF
CSS 0.55-3/3 1201694 PHOENIX CONTACT Speed starter with soft start and adjustable speed for starting and rev..

PHOENIX CONTACT

Manufacturer Code: 1201694
Reference: CSS 0.55-3/3
Catalog Number: -
Speed starter with soft start and adjustable speed for starting and reversing motors up to 480 V AC and 0.55 kW, adjustable motor protection, analog input, STO function up to SIL 3 / PL e, three-phase load input
Speed starter with soft start and adjustable speed for starting and reversing motors up to 480 V AC and 0.55 kW, adjustable motor protection, STO function up to SIL 3 / PL e, Push-in connection, three-phase load input
Delivery: See availability
MINI MCR-EX-SD-16-50-LP 1157869 PHOENIX CONTACT Ex i-Valve control block to activate solenoid valves with in..

PHOENIX CONTACT

Manufacturer Code: 1157869
Reference: MINI MCR-EX-SD-16-50-LP
Catalog Number: -
Ex i-Valve control block to activate solenoid valves with intrinsic safety in the Ex zone. no-load voltage: 16 V DC, current limitation: 50 mA, Standard configuration, Loop-powered, Safety Integrity Level (SIL, IEC 61508): 3, Screw connection
Ex i, Valve control block for operating intrinsically safe solenoid valves in the Ex. zone No-load voltage: 16 V, current limiting: 50 mA, Loop-powered, Safety Integrity Level (SIL, IEC61508): 3, Screw connection
Ex i-Valve control module for the control of Ex i solenoid valves in the Ex zone. no-load voltage: 16 V DC, current limitation: 50 mA, Standard configuration, Loop Powered, Safety Integrity Level (SIL, IEC 61508): 3, Screw connection
Delivery: See availability
CSS 0.25-3/3 1201679 PHOENIX CONTACT Speed starter with soft start and adjustable speed for starting and rev..

PHOENIX CONTACT

Manufacturer Code: 1201679
Reference: CSS 0.25-3/3
Catalog Number: -
Speed starter with soft start and adjustable speed for starting and reversing motors up to 480 V AC and 0.25 kW, adjustable motor protection, analog input, STO function up to SIL 3 / PL e, three-phase load input
Speed starter with soft start and adjustable speed for starting and reversing motors up to 480 V AC and 0.25 kW, adjustable motor protection, STO function up to SIL 3 / PL e, Push-in connection, three-phase load input
Variable speed starter with soft start and adjustable speed for starting and reversing motors up to 480 V AC and 0.25 kW, adjustable motor protection, STO function up to SIL 3 / PL e, Push-in connection, three-phase load input
Delivery: See availability
PLC-V8C/PT-24DC/RS485 1452919 PHOENIX CONTACT PLC logic basic module, with RS-485 connection for Modbus/RTU,..

PHOENIX CONTACT

Manufacturer Code: 1452919
Reference: PLC-V8C/PT-24DC/RS485
Catalog Number: -
PLC logic basic module, with RS-485 connection for Modbus/RTU, with 16 I/O, pluggable into 8 digital or analogue PLC-INTERFACE terminals, expandable to 48 I/O, real-time clock, micro-USB female connector, memory module compartment and Bluetooth adapter, push-in connection
PLC logic expansion module with 16 I/Os for plug-in connection to 8 PLC-INTERFACE terminals for expansion of the basic module (maximum 2 expansion modules can be connected to one basic module),
PLC logic basic module with RS-485 connection for Modbus/RTU communication, with 16 I/Os, for plug-in connection to 8 digital or analog PLC-INTERFACE terminal blocks, can be extended to 48 I/Os, real-time clock, micro USB female connector, accommodates memory module and Bluetooth adapter, Push-in connection
Delivery: See availability
MINI MCR-EX-NAM-RO-PT 1157857 PHOENIX CONTACT Ex i-NAMUR signal conditioner for the operation of proximity s..

PHOENIX CONTACT

Manufacturer Code: 1157857
Reference: MINI MCR-EX-NAM-RO-PT
Catalog Number: -
Ex i-NAMUR signal conditioner for the operation of proximity sensors and switches. Signals are transmitted via 1 solid-state relay at the output (passive) at the control system level. Standard Configuration, Line Fault Detection, Safety Integrity Level (SIL, IEC 61508): 3, Push-in Connection
Ex i-NAMUR Signal Conditioner for the operation of proximity sensors and switches. Signals are transmitted via 1 solid-state relay at the output (passive) at the control system level. Standard Configuration, Line Fault Detection, Safety Integrity Level (SIL, IEC61508): 3, Push-in Connection
Ex i-NAMUR amplifier-splitters for proximity detectors and switches. Signals are transmitted by 1 Solid-State relay to the output (passive) at the control level. Standard configuration, Line fault detection, Safety Integrity Level (SIL, IEC 61508): 3, Push-in connection
Delivery: See availability
MINI MCR-EX-SD-21-48-LP-PT 2908811 PHOENIX CONTACT Ex i, Valve control block for operating intrinsically saf..

PHOENIX CONTACT

Manufacturer Code: 2908811
Reference: MINI MCR-EX-SD-21-48-LP-PT
Catalog Number: -
Ex i, Valve control block for operating intrinsically safe solenoid valves in the zone Ex. No-load voltage: 21 V, current limiting: 48 mA, Loop-powered, Safety Integrity Level (SIL, IEC61508): 3, Push-in connection
Ex i-Solenoid driver for controlling Ex i solenoid valves in the Ex area. no-load voltage: 21 V DC, current limitation: 48 mA, Standard configuration, Loop-powered, Safety Integrity Level (SIL, IEC 61508): 3, Push-in connection
Delivery: See availability
CSS 0.55-1/3-EMC 1201602 PHOENIX CONTACT Speed starter with soft start and adjustable speed for starting and..

PHOENIX CONTACT

Manufacturer Code: 1201602
Reference: CSS 0.55-1/3-EMC
Catalog Number: -
Speed starter with soft start and adjustable speed for starting and reversing motors up to 230 V AC and 0.55 kW, adjustable motor protection, analog input, STO function up to SIL 3 / PL e, single-phase load input, with integrated antiparasitic filter
Speed starter with soft start and adjustable speed for starting and reversing motors up to 480 V AC and 0.55 kW, adjustable motor protection, STO function up to SIL 3 / PL e, Push-in connection, single-phase load input, with integrated EMC filter
Delivery: See availability
CSS 0.25-1/3-EMC 1201520 PHOENIX CONTACT Speed starter with soft start and adjustable speed for starting and..

PHOENIX CONTACT

Manufacturer Code: 1201520
Reference: CSS 0.25-1/3-EMC
Catalog Number: -
Speed starter with soft start and adjustable speed for starting and reversing motors up to 230 V AC and 0.25 kW, adjustable motor protection, analogue input, STO function up to SIL 3 / PL e, single-phase load input, with integrated anti-parasitic filter
Speed starter with soft start and adjustable speed for starting and reversing motors up to 480 V AC and 0.25 kW, adjustable motor protection, STO function up to SIL 3 / PL e, Push-in connection, single-phase load input, with integrated EMC filter
Delivery: See availability
MINI MCR-EX-SD-23-38-LFD 1277116 PHOENIX CONTACT Ex i-Valve control block to activate solenoid valves with i..

PHOENIX CONTACT

Manufacturer Code: 1277116
Reference: MINI MCR-EX-SD-23-38-LFD
Catalog Number: -
Ex i-Valve control block to activate solenoid valves with intrinsic safety in the Ex zone. no-load voltage: 23 V DC, current limitation: 38 mA, Standard configuration, Line fault detection, Safety Integrity Level (SIL, IEC 61508): 3, Screw connection
Ex i, Valve control block for operating intrinsically safe solenoid valves in the area Ex. No-load voltage: 23 V, current limiting: 38 mA, Line fault detection, Safety Integrity Level (SIL, IEC61508): 3, Screw connection
Ex i-Solenoid driver for controlling Ex i solenoid valves in the Ex area. no-load voltage: 23 V DC, current limitation: 38 mA, Standard configuration, Line fault detection, Safety Integrity Level (SIL, IEC 61508): 3, Screw connection
Delivery: See availability
MINI MCR-EX-SD-16-50-LP-PT 1157870 PHOENIX CONTACT Ex i, Valve control block for operating intrinsically saf..

PHOENIX CONTACT

Manufacturer Code: 1157870
Reference: MINI MCR-EX-SD-16-50-LP-PT
Catalog Number: -
Ex i, Valve control block for operating intrinsically safe solenoid valves in the area Ex. No-load voltage: 16 V, current limiting: 50 mA, Loop-powered, Safety Integrity Level (SIL, IEC61508): 3, Push-in connection
Ex i-Valve control block for intrinsically safe solenoid valves in the Ex. zone No-load voltage: 16 V DC, current limiting: 50 mA, Standard configuration, Loop-powered, Safety Integrity Level (SIL, IEC 61508): 3, Push-in connection
Delivery: See availability
EM-CSS-SHIELDING-SET-SCC-35 1451206 PHOENIX CONTACT Accessory set for a simple and reliable connection to th..

PHOENIX CONTACT

Manufacturer Code: 1451206
Reference: EM-CSS-SHIELDING-SET-SCC-35
Catalog Number: -
Accessory set for a simple and reliable connection to the CONTACTRON Speed Starter, consisting of a 35 mm protective plate, 2 display terminal blocks for the signal line and a display connection terminal for the motor line.
Delivery: See availability
MACX MCR-EX-AP-2F-2I 1290530 PHOENIX CONTACT Ex i-Frequency converters. the frequencies measured at the Ex i..

PHOENIX CONTACT

Manufacturer Code: 1290530
Reference: MACX MCR-EX-AP-2F-2I
Catalog Number: -
Ex i-Frequency converters. the frequencies measured at the Ex i inputs (0.001 Hz ... 20 kHz) are emitted as 0 mA/4 mA non-Ex i signals... 20 mA. Standard configuration, 5-way separation, Screw connection
Ex i-Frequency Converters; the frequencies measured at the inputs Ex i (0.001 Hz ... 20 kHz) are emitted as 0 mA/4 mA non-Ex i signals... 20 mA. Standard Configuration, 5-Way Spacing, Screw Connection
Delivery: See availability
CSS 0.37-3/3 1201683 PHOENIX CONTACT Speed starter with soft start and adjustable speed for starting and rev..

PHOENIX CONTACT

Manufacturer Code: 1201683
Reference: CSS 0.37-3/3
Catalog Number: -
Speed starter with soft start and adjustable speed for starting and reversing motors up to 480 V AC and 0.37 kW, adjustable motor protection, analog input, STO function up to SIL 3 / PL e, three-phase load input
Speed starter with soft start and adjustable speed for starting and reversing motors up to 480 V AC and 0.37 kW, adjustable motor protection, STO function up to SIL 3 / PL e, Push-in connection, three-phase load input
Speed starter with soft start and configurable speed for starting and reversing motors up to 480 V AC and 0.37 kW, configurable motor protection, STO function up to SIL 3 / PL e, Push-in connection, three-phase load input
Delivery: See availability
CSS 0.55-1/3 1201494 PHOENIX CONTACT Speed starter with soft start and adjustable speed for starting and rev..

PHOENIX CONTACT

Manufacturer Code: 1201494
Reference: CSS 0.55-1/3
Catalog Number: -
Speed starter with soft start and adjustable speed for starting and reversing motors up to 230 V AC and 0.55 kW, adjustable motor protection, analog input, STO function up to SIL 3 / PL e, single-phase load input
Speed starter with soft start and adjustable speed for starting and reversing motors up to 480 V AC and 0.55 kW, adjustable motor protection, STO function up to SIL 3 / PL e, Push-in connection, single-phase load input
Variable speed starter with soft start and adjustable speed for starting and reversing motors up to 480 V AC and 0.55 kW, adjustable motor protection, STO function up to SIL 3 / PL e, Push-in connection, single-phase load input
Delivery: See availability
MINI MCR-EX-SD-23-38-LFD-PT 1277119 PHOENIX CONTACT Ex i-Valve control block to activate solenoid valves wit..

PHOENIX CONTACT

Manufacturer Code: 1277119
Reference: MINI MCR-EX-SD-23-38-LFD-PT
Catalog Number: -
Ex i-Valve control block to activate solenoid valves with intrinsic safety in the Ex zone. no-load voltage: 23 V DC, current limitation: 38 mA, Standard configuration, Line fault detection, Safety Integrity Level (SIL, IEC 61508): 3, Push-in connection
Ex i, Valve control block for operating intrinsically safe solenoid valves in the zone Ex. No-load voltage: 23 V, current limiting: 38 mA, Line fault detection, Safety Integrity Level (SIL, IEC61508): 3, Push-in connection
Ex i-Solenoid driver for controlling Ex i solenoid valves in the Ex area. no-load voltage: 23 V DC, current limitation: 38 mA, Standard configuration, Line fault detection, Safety Integrity Level (SIL, IEC 61508): 3, Push-in connection
Delivery: See availability
UM 45-32/MP/LA/PLC/F-SO2282 5746149 PHOENIX CONTACT Interconnection module

PHOENIX CONTACT

Manufacturer Code: 5746149
Reference: UM 45-32/MP/LA/PLC/F-SO2282
Catalog Number: -
Interconnection module
Delivery: See availability
PACT SPC-20-1A-D13 1382378 PHOENIX CONTACT Split Core Current Transformers, Primary Current: 20 A AC, Second..

PHOENIX CONTACT

Manufacturer Code: 1382378
Reference: PACT SPC-20-1A-D13
Catalog Number: -
Split Core Current Transformers, Primary Current: 20 A AC, Secondary Current: 0 ... 1 A AC, Accuracy class: 3, rated power: 0.2 VA, signal line length: 2 m
Split Core Current Transformers, Primary Current: 0 ... 20 A AC, secondary current: 0 ... 1 A AC, rated power: 0.2 VA, signal line length: 2 m
Split-core current transformer, primary current: 0 ... 20 A AC, secondary current: 0 ... 1 A AC, rated power: 0.2 VA, length of signal cable: 2 m
Delivery: See availability
CSS 0.75-1/3 1201509 PHOENIX CONTACT Speed starter with soft start and adjustable speed for starting and rev..

PHOENIX CONTACT

Manufacturer Code: 1201509
Reference: CSS 0.75-1/3
Catalog Number: -
Speed starter with soft start and adjustable speed for starting and reversing motors up to 230 V AC and 0.75 kW, adjustable motor protection, analog input, STO function up to SIL 3 / PL e, single-phase load input
Speed starter with soft start and adjustable speed for starting and reversing motors up to 480 V AC and 0.75 kW, adjustable motor protection, STO function up to SIL 3 / PL e, Push-in connection, single-phase load input
Delivery: See availability
MACX MCR-EX-AP-2F-2I-SP 1290533 PHOENIX CONTACT Ex i-Frequency converters. the frequencies measured at the E..

PHOENIX CONTACT

Manufacturer Code: 1290533
Reference: MACX MCR-EX-AP-2F-2I-SP
Catalog Number: -
Ex i-Frequency converters. the frequencies measured at the Ex i inputs (0.001 Hz ... 20 kHz) are emitted as 0 mA/4 mA non-Ex i signals... 20 mA. Standard configuration, 5-way separation, Push-in connection
Ex i-Frequency Converters; the frequencies measured at the inputs Ex i (0.001 Hz ... 20 kHz) are emitted as 0 mA/4 mA non-Ex i signals... 20 mA. Standard Configuration, 5-Way Spacing, Push-in Connection
Delivery: See availability
CSS 1.5-3/3 1201650 PHOENIX CONTACT Speed starter with soft start and adjustable speed for starting and reve..

PHOENIX CONTACT

Manufacturer Code: 1201650
Reference: CSS 1.5-3/3
Catalog Number: -
Speed starter with soft start and adjustable speed for starting and reversing motors up to 480 V AC and 1.5 kW, adjustable motor protection, analog input, STO function up to SIL 3 / PL e, three-phase load input
Speed starter with soft start and adjustable speed for starting and reversing motors up to 480 V AC and 1.5 kW, adjustable motor protection, STO function up to SIL 3 / PL e, Push-in connection, three-phase load input
Speed starter with soft start and configurable speed for starting and reversing motors up to 480 V AC and 1.5 kW, configurable motor protection, STO function up to SIL 3 / PL e, Push-in connection, three-phase load input
Delivery: See availability
CSS 1.5-1/3 1201511 PHOENIX CONTACT Speed starter with soft start and adjustable speed for starting and reve..

PHOENIX CONTACT

Manufacturer Code: 1201511
Reference: CSS 1.5-1/3
Catalog Number: -
Speed starter with soft start and adjustable speed for starting and reversing motors up to 230 V AC and 1.5 kW, adjustable motor protection, analog input, STO function up to SIL 3 / PL e, single-phase load input
Speed starter with soft start and adjustable speed for starting and reversing motors up to 480 V AC and 1.5 kW, adjustable motor protection, STO function up to SIL 3 / PL e, Push-in connection, single-phase load input
Speed starter with soft start and configurable speed for starting and reversing motors up to 480 V AC and 1.5 kW, configurable motor protection, STO function up to SIL 3 / PL e, Push-in connection, single-phase load input
Delivery: See availability
MACX MCR-EX-AP-2T-2I 1290780 PHOENIX CONTACT Ex i-Temperature converters, Ex i input signals of thermoresist..

PHOENIX CONTACT

Manufacturer Code: 1290780
Reference: MACX MCR-EX-AP-2T-2I
Catalog Number: -
Ex i-Temperature converters, Ex i input signals of thermoresistors in 2, 3 or 4 conductor technology, thermocouples and mV sources are converted into non-Ex i signals of 0 mA / 4 mA ... 20 mA active. Standard configuration, 5-way separation, Screw connection
Ex i, Temperature converters, Ex i input signals of resistance thermometers in 2, 3 or 4 conductor technology, thermocouples and mV sources are converted to 0 mA / 4 mA non-Ex i signals... 20 mA active. 2 Channels, Universal, Free Programming, 5-Way Spacing, Screw Connection
Ex i-Temperature transducer, input signals from resistance thermometers in 2, 3, or 4-conductor technology, thermocouples, and mV sources are converted into active 0 mA / 4 mA ... 20  mA non Ex i signals. Standard configuration, 5-way isolation, Screw connection
Delivery: See availability
BASE-MSTB/D37M/16CH/EX 1065476 PHOENIX CONTACT 16-channel Marshalling VIP I/O base element with 37-pin D-SUB..

PHOENIX CONTACT

Manufacturer Code: 1065476
Reference: BASE-MSTB/D37M/16CH/EX
Catalog Number: -
16-channel Marshalling VIP I/O base element with 37-pin D-SUB connectors for universal use. Plug-in field and supply terminals available as accessories. Optionally with screw or push-in connection technology.
Delivery: See availability
ME-TBUS-A IMC1,5-2 1351982 PHOENIX CONTACT Bus connector adapter for DIN rail (2 poles) to connect MACX equi..

PHOENIX CONTACT

Manufacturer Code: 1351982
Reference: ME-TBUS-A IMC1,5-2
Catalog Number: -
Bus connector adapter for DIN rail (2 poles) to connect MACX equipment MCR-EX-AP... to the MACX MCR-PTB(-SP) power module on the left side with the DIN rail bus connector ME 17.5 TBUS 1.5/5-ST-3.81 GY for supply voltage jumping.
Rail bus connector adapter (2-pole) for connecting MACX MCR-EX-AP devices... to the MACX MCR-PTB(-SP) power module on the left side with the rail bus connector ME 17.5 TBUS 1.5/5-ST-3.81 GY for bridging the supply voltage.
DIN rail connector adapter (2-pos.) for connection of MACX MCR-EX-AP... devices on the left side to the MACX MCR-PTB(-SP) power module with DIN rail connector ME 17,5 TBUS 1,5/5-ST-3,81 GY for bridging the supply voltage.
Delivery: See availability
CSS 0.25-3/3-EMC 1201713 PHOENIX CONTACT Speed starter with soft start and adjustable speed for starting and..

PHOENIX CONTACT

Manufacturer Code: 1201713
Reference: CSS 0.25-3/3-EMC
Catalog Number: -
Speed starter with soft start and adjustable speed for starting and reversing motors up to 480 V AC and 0.25 kW, adjustable motor protection, analog input, STO function up to SIL 3 / PL e, three-phase load input, with integrated antiparasitic filter
Speed starter with soft start and adjustable speed for starting and reversing motors up to 480 V AC and 0.25 kW, adjustable motor protection, STO function up to SIL 3 / PL e, Push-in connection, three-phase load input, with integrated EMC filter
Speed starter with soft start and configurable speed for starting and reversing motors up to 480 V AC and 0.25 kW, configurable motor protection, STO function up to SIL 3 / PL e, Push-in connection, three-phase load input, with integrated EMC filter
Delivery: See availability
MINI MCR-EX-SD-23-38-LP-PT 1277114 PHOENIX CONTACT Ex i-Valve control block to activate solenoid valves with..

PHOENIX CONTACT

Manufacturer Code: 1277114
Reference: MINI MCR-EX-SD-23-38-LP-PT
Catalog Number: -
Ex i-Valve control block to activate solenoid valves with intrinsic safety in the Ex zone. no-load voltage: 23 V DC, current limitation: 38 mA, Standard configuration, Loop-powered, Safety Integrity Level (SIL, IEC 61508): 3, Push-in connection
Ex i, Valve control block for operating intrinsically safe solenoid valves in the zone Ex. No-load voltage: 23 V, current limiting: 38 mA, Loop-powered, Safety Integrity Level (SIL, IEC61508): 3, Push-in connection
Ex i-Solenoid driver for controlling Ex i solenoid valves in the Ex area. no-load voltage: 23 V DC, current limitation: 38 mA, Standard configuration, Loop-powered, Safety Integrity Level (SIL, IEC 61508): 3, Push-in connection
Delivery: See availability
MACX MCR-EX-AP-2SD-25-35-LP-SP 1291186 PHOENIX CONTACT Ex i-Valve control block to activate Ex i magnetic va..

PHOENIX CONTACT

Manufacturer Code: 1291186
Reference: MACX MCR-EX-AP-2SD-25-35-LP-SP
Catalog Number: -
Ex i-Valve control block to activate Ex i magnetic valves, alarm transmitters or intrinsically safe indicators installed in the Ex zone. Standard configuration, Loop-powered, 4-way separation, Safety Integrity Level (SIL, IEC 61508): 3, Push-in connection
Ex i, Valve Control Block for Activating Ex i Magnetic Valves, Alarm Transmitters or Intrinsically Safe Indicators Installed in the Ex Zone. 2 channels, Loop-powered, 4-way separation, Safety Integrity Level (SIL, IEC61508): 3, Push-in connection
Ex i-Solenoid driver for intrinsically safe activation of Ex i solenoid valves, alarm transmitters, or displays installed in potentially explosive areas. Standard configuration, Loop-powered, 4-way isolation, Safety Integrity Level (SIL, IEC 61508): 3, Push-in connection
Delivery: See availability
MINI MCR-EX-SD-16-50-LFD 1175902 PHOENIX CONTACT Ex i-Valve control block to activate solenoid valves with i..

PHOENIX CONTACT

Manufacturer Code: 1175902
Reference: MINI MCR-EX-SD-16-50-LFD
Catalog Number: -
Ex i-Valve control block to activate solenoid valves with intrinsic safety in the Ex zone. no-load voltage: 16 V DC, current limitation: 50 mA, Standard configuration, Line fault detection, Safety Integrity Level (SIL, IEC 61508): 3, Screw connection
Ex i-Valve Control Block for Activating Intrinsically Safe Solenoid Valves in the Zone Ex. No-Load Voltage: 16 V, Current Limiting: 50 mA, Standard Configuration, Line Fault Detection, Safety Integrity Level (SIL, IEC61508): 3, Screw Connection
Ex i-Solenoid driver for controlling Ex i solenoid valves in the Ex area. no-load voltage: 16 V DC, current limitation: 50 mA, Standard configuration, Line fault detection, Safety Integrity Level (SIL, IEC 61508): 3, Screw connection
Delivery: See availability
PLUGKIT-BU/FKC/16CH-1-16 1300532 PHOENIX CONTACT Set of male connectors for standard applications for use wi..

PHOENIX CONTACT

Manufacturer Code: 1300532
Reference: PLUGKIT-BU/FKC/16CH-1-16
Catalog Number: -
Set of male connectors for standard applications for use with Marshalling I/O VIP BASE-MSTB/D37M/16CH/EX base element with push-in connection.
Connector set for standard applications for use with BASE-MSTB/D37M/16CH/EX VIP I/O marshalling base element with Push-in connection.
Delivery: See availability
CSS 0.55-3/3-EMC 1201828 PHOENIX CONTACT Speed starter with soft start and adjustable speed for starting and..

PHOENIX CONTACT

Manufacturer Code: 1201828
Reference: CSS 0.55-3/3-EMC
Catalog Number: -
Speed starter with soft start and adjustable speed for starting and reversing motors up to 480 V AC and 0.55 kW, adjustable motor protection, analog input, STO function up to SIL 3 / PL e, three-phase load input, with integrated antiparasitic filter
Speed starter with soft start and adjustable speed for starting and reversing motors up to 480 V AC and 0.55 kW, adjustable motor protection, STO function up to SIL 3 / PL e, Push-in connection, three-phase load input, with integrated EMC filter
Speed starter with soft start and configurable speed for starting and reversing motors up to 480 V AC and 0.55 kW, configurable motor protection, STO function up to SIL 3 / PL e, Push-in connection, three-phase load input, with integrated EMC filter
Delivery: See availability
CSS 1.5-3/3-EMC 1201696 PHOENIX CONTACT Speed starter with soft start and adjustable speed for starting and ..

PHOENIX CONTACT

Manufacturer Code: 1201696
Reference: CSS 1.5-3/3-EMC
Catalog Number: -
Speed starter with soft start and adjustable speed for starting and reversing motors up to 480 V AC and 1.5 kW, adjustable motor protection, analogue input, STO function up to SIL 3 / PL e, three-phase load input, with integrated anti-parasitic filter
Speed starter with soft start and adjustable speed for starting and reversing motors up to 480 V AC and 1.5 kW, adjustable motor protection, STO function up to SIL 3 / PL e, Push-in connection, three-phase load input, with integrated EMC filter
Speed starter with soft start and configurable speed for starting and reversing motors up to 480 V AC and 1.5 kW, configurable motor protection, STO function up to SIL 3 / PL e, Push-in connection, three-phase load input, with integrated EMC filter
Delivery: See availability
MACX MCR-EX-AP-IDS-2I-2I-LP 1291963 PHOENIX CONTACT EX i-Output Separation Transmitter separates and transfe..

PHOENIX CONTACT

Manufacturer Code: 1291963
Reference: MACX MCR-EX-AP-IDS-2I-2I-LP
Catalog Number: -
EX i-Output Separation Transmitter separates and transfers 0mA/4mA signals... 20 mA with intrinsic safety in the Ex zone. Suitable for fire and gas detectors. With HART transparency, no-load voltage: 25 V, Standard configuration, Loop-powered, 4-way separation, Safety Integrity Level (SIL, IEC 61508): 3, Screw connection
Ex i, Output Separation Transmitter separates and transfers 0 mA/4 mA signals... 20 mA with intrinsic safety in the Ex zone. Suitable for fire and gas detectors. With HART transparency, no-load voltage: 25 V, Loop-powered, 4-way spacing, Safety Integrity Level (SIL, IEC61508): 3, Screw connection
Ex i-Output isolator isolates and transmits 0 mA / 4 mA ... 20 mA signals with intrinsic safety in potentially explosive areas. Suitable for fire and gas detectors. HART-transparent, no-load voltage: 25 V, Standard configuration, Loop-powered, 4-way isolation, Safety Integrity Level (SIL, IEC 61508): 3, Screw connection
Delivery: See availability
MCR-DP 1430594 PHOENIX CONTACT The separator plate is used to maintain the Ex i separation sections in the e..

PHOENIX CONTACT

Manufacturer Code: 1430594
Reference: MCR-DP
Catalog Number: -
The separator plate is used to maintain the Ex i separation sections in the event that Ex i and non-Ex i equipment are aligned on the DIN rail.
The partition plate is used to maintain Ex i isolating distances when Ex i and non-Ex i devices are mounted side by side on a DIN rail.
Delivery: See availability
MACX MCR-EX-AP-2SD-25-35-LP 1291176 PHOENIX CONTACT Ex i-Valve control block to activate Ex i magnetic valve..

PHOENIX CONTACT

Manufacturer Code: 1291176
Reference: MACX MCR-EX-AP-2SD-25-35-LP
Catalog Number: -
Ex i-Valve control block to activate Ex i magnetic valves, alarm transmitters or intrinsically safe indicators installed in the Ex zone. Standard configuration, Loop-powered, 4-way separation, Safety Integrity Level (SIL, IEC 61508): 3, Screw connection
Ex i, Valve Control Block for Activating Ex i Magnetic Valves, Alarm Transmitters or Intrinsically Safe Indicators Installed in the Ex Zone. 2 channels, Loop-powered, 4-way separation, Safety Integrity Level (SIL, IEC61508): 3, Screw connection
Ex i-Solenoid driver for intrinsically safe activation of Ex i solenoid valves, alarm transmitters, or displays installed in potentially explosive areas. Standard configuration, Loop-powered, 4-way isolation, Safety Integrity Level (SIL, IEC 61508): 3, Screw connection
Delivery: See availability
BASE/U/RAIL DIVIDER 1267397 PHOENIX CONTACT Marshalling I/O VIP separator plate for safe separation between ..

PHOENIX CONTACT

Manufacturer Code: 1267397
Reference: BASE/U/RAIL DIVIDER
Catalog Number: -
Marshalling I/O VIP separator plate for safe separation between base modules equipped with and without intrinsic safety for universal use in UM-PRO design. MSTB... The spacer plate is mounted directly on the DIN rail at the end of the base module.
VIP I/O marshaling divider plate for the safe separation between Non Ex i and Ex i equipped plinth modules, for universal use in UM-PRO design ... MSTB... The divider plate is mounted directly on the DIN rail at the end of the base module.
Delivery: See availability
MACX MCR-EX-AP-2T-2I-SP 1290849 PHOENIX CONTACT Ex i-Temperature converters, input signals Ex i of resistanc..

PHOENIX CONTACT

Manufacturer Code: 1290849
Reference: MACX MCR-EX-AP-2T-2I-SP
Catalog Number: -
Ex i-Temperature converters, input signals Ex i of resistance thermometers in 2, 3 or 4 conductor technology, thermocouples and mV sources are converted to 0 mA / 4 mA non-Ex i signals... 20 mA active. Standard Configuration, 5-Way Spacing, Push-in Connection
Ex i, Temperature converters, Ex i input signals of resistance thermometers in 2, 3 or 4 conductor technology, thermocouples and mV sources are converted to 0 mA / 4 mA non-Ex i signals... 20 mA active. 2-Channel, Universal, Free Programming, 5-Way Separation, Push-in Connection
Delivery: See availability
MACX MCR-EX-AP-2REL-2DI-LP-SP 1292332 PHOENIX CONTACT The relay module separates the Ex i and non-Ex i contr..

PHOENIX CONTACT

Manufacturer Code: 1292332
Reference: MACX MCR-EX-AP-2REL-2DI-LP-SP
Catalog Number: -
The relay module separates the Ex i and non-Ex i control and signal circuits and serves for intrinsically safe control of Ex i field current circuits via one inverter relay per channel. Standard configuration, Loop-powered, 4-way separation, Safety Integrity Level (SIL, IEC 61508): 2, Push-in connection
Ex i, The relay module separates the Ex i and non-Ex i control and signal circuits and serves for the intrinsically safe control of Ex i field current circuits via a channel inverter relay. 2-Channel, Loop-powered, 4-Way Separation, Safety Integrity Level (SIL, IEC61508): 2, Push-in connection
Ex i relay module separates binary Ex i and Non Ex i signal and control circuits and is used for intrinsically safe control of Ex i field circuits via one coupler relay per channel. Standard configuration, loop-powered, 4-way isolation, Safety Integrity Level (SIL, IEC 61508): 2, push-in connection
Delivery: See availability
MINI MCR-EX-IDS-I-I 2908805 PHOENIX CONTACT MINI Analog Signal Conditioner SIL 2

PHOENIX CONTACT

Manufacturer Code: 2908805
Reference: MINI MCR-EX-IDS-I-I
Catalog Number: -
MINI Analog Signal Conditioner SIL 2
Ex i-Output Signal Conditioner for Separating and Transferring 0mA/4mA Signals... 20 mA from the control system to an intrinsically safe load in the Ex zone. With HART transparency, no-load voltage: 27 V DC, Standard configuration, Safety Integrity Level (SIL, IEC 61508): 3, Screw connection
Ex i-Output signal conditioner for isolating and transmitting 0 mA / 4 mA ... 20 mA signals from the controller to an intrinsically safe load in the Ex area. HART-transparent, no-load voltage: 27 V DC, Standard configuration, Safety Integrity Level (SIL, IEC 61508): 3, Screw connection
Delivery: See availability
MINI MCR-EX-RPSS-I-I 2908803 PHOENIX CONTACT MINI Analog Signal Conditioner SIL 2

PHOENIX CONTACT

Manufacturer Code: 2908803
Reference: MINI MCR-EX-RPSS-I-I
Catalog Number: -
MINI Analog Signal Conditioner SIL 2
Ex i-Input and Power Signal Conditioner transmits 0mA/4mA signals... 20 mA powered or active from the Ex zone at a load to the safe zone. With HART transparency, no-load voltage: 15 V DC, Standard configuration, Line fault detection, Safety Integrity Level (SIL, IEC 61508): 3, Screw connection
Ex i-Repeater power supply and input signal conditioner transmits supplied or active 0 mA/4 mA ... 20 mA signals from the Ex area to a load in the safe area.. HART-transparent, no-load voltage: 15 V DC, Standard configuration, Line fault detection, Safety Integrity Level (SIL, IEC 61508): 3, Screw connection
Delivery: See availability
MINI MCR-2-IDS-I-I 2905623 PHOENIX CONTACT Output signal conditioner for separating and transferring 0mA/4mA..

PHOENIX CONTACT

Manufacturer Code: 2905623
Reference: MINI MCR-2-IDS-I-I
Catalog Number: -
Output signal conditioner for separating and transferring 0mA/4mA signals... 20 mA from the control system to an intrinsically safe load in the Ex zone. With HART transparency, no-load voltage: 27 V DC, Standard configuration, Screw connection
Delivery: See availability
MINI MCR-EX-IDS-I-I-PT 2908806 PHOENIX CONTACT Ex i-Output Signal Conditioner for Separating and Transferrin..

PHOENIX CONTACT

Manufacturer Code: 2908806
Reference: MINI MCR-EX-IDS-I-I-PT
Catalog Number: -
Ex i-Output Signal Conditioner for Separating and Transferring 0mA/4mA Signals... 20 mA from the control system to an intrinsically safe load in the Ex zone. With HART transparency, no-load voltage: 27 V DC, Standard configuration, Safety Integrity Level (SIL, IEC 61508): 3, Push-in connection
Delivery: See availability
MINI MCR-EX-NAM-2T 1157852 PHOENIX CONTACT Ex i-NAMUR signal conditioner for the operation of proximity sens..

PHOENIX CONTACT

Manufacturer Code: 1157852
Reference: MINI MCR-EX-NAM-2T
Catalog Number: -
Ex i-NAMUR signal conditioner for the operation of proximity sensors and switches in the Ex zone. The signals are transmitted through 2 transistor outputs (passive) to the safe zone. Standard Configuration, Line Fault Detection, Safety Integrity Level (SIL, IEC 61508): 3, Screw Connection
Delivery: See availability
ELR DCR-PT-24DC-3 1291615 PHOENIX CONTACT Electronic inverter relay for DC motor control, with light indicat..

PHOENIX CONTACT

Manufacturer Code: 1291615
Reference: ELR DCR-PT-24DC-3
Catalog Number: -
Electronic inverter relay for DC motor control, with light indication and protection circuit, output: 24 V DC/3 A with a switching time of 5 ms
Delivery: See availability
MINI MCR-EX-RPSS-I-I-PT 2908804 PHOENIX CONTACT Ex i-Input and Power Signal Conditioner transmits 0mA/4mA si..

PHOENIX CONTACT

Manufacturer Code: 2908804
Reference: MINI MCR-EX-RPSS-I-I-PT
Catalog Number: -
Ex i-Input and Power Signal Conditioner transmits 0mA/4mA signals... 20 mA powered or active from the Ex zone at a load to the safe zone. With HART transparency, no-load voltage: 15 V DC, Standard configuration, Line fault detection, Safety Integrity Level (SIL, IEC 61508): 3, Push-in connection
Delivery: See availability
VIP-PA-2X14/26/ 2,0M/1756/062 1162593 PHOENIX CONTACT VARIOFACE VIP front adapter, with connected system cab..

PHOENIX CONTACT

Manufacturer Code: 1162593
Reference: VIP-PA-2X14/26/ 2,0M/1756/062
Catalog Number: -
VARIOFACE VIP front adapter, with connected system cables for ControlLogix® 1756 I/O module, connectable up to 2 x 8 channels.
VIP VARIOFACE front adapter, with connected system cables for ControlLogix® 1756 I/O. Up to 2 x 8 channels can be connected., cable length: 2 m
VIP VARIOFACE front adapter, with connected system cables for ControlLogix® 1756 I/O. Up to 2 x 8 channels can be connected.
Delivery: See availability
CABLE-FLK14/AXIO/OE/0,14/4,0M 1369906 PHOENIX CONTACT Ready-made round cable. Control: Axioline Realtime I/O..

PHOENIX CONTACT

Manufacturer Code: 1369906
Reference: CABLE-FLK14/AXIO/OE/0,14/4,0M
Catalog Number: -
Ready-made round cable. Control: Axioline Realtime I/O. Connection 1: Individual conductors (8-poles) (The conductors are labeled and equipped with ferrules). Connection 2: Female IDC/FLK connection (1x 14-pole). Cable length: 4 m
Ready-made round cable; control: Axioline Realtime I/O; Connection 1: Individual conductors (8-poles) (Conductors are labeled and equipped with toe caps); Connection 2: IDC/FLK connection female (1x 14-pole); Cable length: 4m
Round cable set; controller: Axioline Realtime I/O; connection 1: Single wires (8-position) (The wires are marked and fitted with ferrules); connection 2: IDC/FLK socket strip (1x 14-position); cable length: 4 m
Delivery: See availability
ELR HDC-PT-24/650/55-IOL 1368127 PHOENIX CONTACT DC protection switch for protecting, monitoring and switchi..

PHOENIX CONTACT

Manufacturer Code: 1368127
Reference: ELR HDC-PT-24/650/55-IOL
Catalog Number: -
DC protection switch for protecting, monitoring and switching high DC loads, intermediate circuit preload; parameterizable, 0 V DC ... 800 V DC, up to 55 A, short-circuit switch-off at < 10 μs thanks to hybrid technology, integrated bus communication
DC protection switch for protecting, monitoring and switching high DC loads, intermediate circuit preload. parameterizable, 0 V DC ... 800 V DC, up to 55 A, disconnect in case of short circuit in &lt.; 10 μs thanks to hybrid technology, integrated bus communication
Delivery: See availability
ELR DCR-PT-24DC-10 1291655 PHOENIX CONTACT Electronic reversing relay for DC motor activation, with light in..

PHOENIX CONTACT

Manufacturer Code: 1291655
Reference: ELR DCR-PT-24DC-10
Catalog Number: -
Electronic reversing relay for DC motor activation, with light indication and protection circuit, output: 24 V DC/10 A with a switching time of 5 ms
Delivery: See availability
EM-PSAFE-GATEWAY-IFS 1188207 PHOENIX CONTACT Link gateway for connecting up to 15 devices of the Interface s..

PHOENIX CONTACT

Manufacturer Code: 1188207
Reference: EM-PSAFE-GATEWAY-IFS
Catalog Number: -
Link gateway for connecting up to 15 devices of the Interface system via PROFIsafe to a higher-order secure control system. The system devices are connected via DIN rail bus connectors to the link gateway. Bus connectors for DIN rail are included.
Link gateway for the connection of up to 15 connected devices from the INTERFACE system via PROFIsafe to a higher-order safe control system. The system devices are connected to the gateway via DIN rail bus connectors. Bus connectors for DIN rail are included.
Delivery: See availability
MINI MCR-EX-RPSS-I-I-PT-SAMPLE 1328922 PHOENIX CONTACT NFC mechanical model of a MINI MCR-EX-RPSS-I-I-PT-SAM..

PHOENIX CONTACT

Manufacturer Code: 1328922
Reference: MINI MCR-EX-RPSS-I-I-PT-SAMPLE
Catalog Number: -
NFC mechanical model of a MINI MCR-EX-RPSS-I-I-PT-SAMPLE power signal conditioner with plug-in connection technology, no electrical function, push-in connection technology
Valve control component
Delivery: See availability
MM-EE-EEM-EM377 1684491 PHOENIX CONTACT Three-phase energy meter for measuring active power with direct meas..

PHOENIX CONTACT

Manufacturer Code: 1684491
Reference: MM-EE-EEM-EM377
Catalog Number: -
Three-phase energy meter for measuring active power with direct measurement in networks up to 480 V/100 A, with Ethernet interface, operating temperature up to +70 °C, certified according to the MID directive
Three-phase energy meter for measuring active power with direct measurement in networks up to 480 V/100 A, with Ethernet interface, operating temperature up to +70 °C.
Delivery: See availability
ECM-UC-10A-UI-REL 1698164 PHOENIX CONTACT Current converter for measuring direct, alternating and distorted ..

PHOENIX CONTACT

Manufacturer Code: 1698164
Reference: ECM-UC-10A-UI-REL
Catalog Number: -
Current converter for measuring direct, alternating and distorted currents. Configuration via USB-C interface via web server (without 24 V DC). 4 current measurement ranges: 0 A ... 0.1 A to 0 A ... 12.5 A. Relay output, Standard configuration, Push-in connection
Current converter for measuring direct, alternating and distorted currents. Configuration via USB-C interface via web server (without 24 V DC). 4 current measurement ranges: 0 A ... 0.1 A to 0 A ... 12.5 A. Relay output, Transistor output, Standard configuration, Push-in connection
Delivery: See availability
EEM-EC377-SON 1646966 PHOENIX CONTACT Measuring Equipment

PHOENIX CONTACT

Manufacturer Code: 1646966
Reference: EEM-EC377-SON
Catalog Number: -
Measuring Equipment
Delivery: See availability
MINI MCR-EX-SD-23-38-LP 1277111 PHOENIX CONTACT Ex i-Valve control block to activate solenoid valves with in..

PHOENIX CONTACT

Manufacturer Code: 1277111
Reference: MINI MCR-EX-SD-23-38-LP
Catalog Number: -
Ex i-Valve control block to activate solenoid valves with intrinsic safety in the Ex zone. no-load voltage: 23 V DC, current limitation: 38 mA, Standard configuration, Loop-powered, Safety Integrity Level (SIL, IEC 61508): 3, Screw connection
Ex i, Valve control block for operating intrinsically safe solenoid valves in the Ex. zone No-load voltage: 23 V, current limiting: 38 mA, Loop-powered, Safety Integrity Level (SIL, IEC61508): 3, Screw connection
Ex i-Solenoid driver for controlling Ex i solenoid valves in the Ex area. no-load voltage: 23 V DC, current limitation: 38 mA, Standard configuration, Loop-powered, Safety Integrity Level (SIL, IEC 61508): 3, Screw connection
Delivery: See availability
MINI MCR-BL-PT100-I-NC 2810489 PHOENIX CONTACT Configurable temperature signal conditioner for Pt 100 temper..

PHOENIX CONTACT

Manufacturer Code: 2810489
Reference: MINI MCR-BL-PT100-I-NC
Catalog Number: -
Configurable temperature signal conditioner for Pt 100 temperature sensors in the measurement range of -50°C... 200°C, screw connection
Delivery: See availability
ECM-UC-100A-UI 1136513 PHOENIX CONTACT Current converter for measuring direct, alternating and distorted cur..

PHOENIX CONTACT

Manufacturer Code: 1136513
Reference: ECM-UC-100A-UI
Catalog Number: -
Current converter for measuring direct, alternating and distorted currents. Configuration via USB-C interface via web server (without 24 V DC). Current measurement ranges: 0 A ... 125 A. Standard Configuration, Push-in Connection
Delivery: See availability
ECM-UC-10A-MRTU 1191969 PHOENIX CONTACT Current converter for measuring direct, alternating and distorted cu..

PHOENIX CONTACT

Manufacturer Code: 1191969
Reference: ECM-UC-10A-MRTU
Catalog Number: -
Current converter for measuring direct, alternating and distorted currents. Configuration via USB-C interface via web server (without 24 V DC). 4 current measurement ranges: 0 A ... 0.1 A to 0 A ... 12.5 A. Modbus RTU Interface Configuration (RS-485), Standard Configuration, Push-in Connection
Delivery: See availability
EEM-PM157-SLP 1269236 PHOENIX CONTACT DC energy meter with direct measurement up to 1000 V / 650 A, with RS-..

PHOENIX CONTACT

Manufacturer Code: 1269236
Reference: EEM-PM157-SLP
Catalog Number: -
DC energy meter with direct measurement up to 1000 V / 650 A, with RS-485 interfaces for programming software and for DC load control, charging cable loss correction, operating temperature up to +80 °C, certified in accordance with the measurement and calibration law
Delivery: See availability
ECM-UC-10A-UI 1136504 PHOENIX CONTACT Current converter for measuring direct, alternating and distorted curr..

PHOENIX CONTACT

Manufacturer Code: 1136504
Reference: ECM-UC-10A-UI
Catalog Number: -
Current converter for measuring direct, alternating and distorted currents. Configuration via USB-C interface via web server (without 24 V DC). 4 current measurement ranges: 0 A ... 0.1 A to 0 A ... 12.5 A. Standard Configuration, Push-in Connection
Delivery: See availability
MM-EE-EEM-MA500 1484138 PHOENIX CONTACT Multifunctional energy meters for direct measurement of electrical p..

PHOENIX CONTACT

Manufacturer Code: 1484138
Reference: MM-EE-EEM-MA500
Catalog Number: -
Multifunctional energy meters for direct measurement of electrical parameters up to 600 V in the power grid. allows pulse output. Operating temperature up to +70 °C.
Delivery: See availability
CABLE-FLK40/4FLK14/HF/S7/2,0M 1464628 PHOENIX CONTACT Round cable made without halogens. Connection 1: Femal..

PHOENIX CONTACT

Manufacturer Code: 1464628
Reference: CABLE-FLK40/4FLK14/HF/S7/2,0M
Catalog Number: -
Round cable made without halogens. Connection 1: Female IDC/FLK connection (1x 40-poles). Connection 2: Female IDC/FLK connection (4x 14-pole). Cable length: 2 m
Cable
Assembled, halogen-free round cable; connection 1: IDC/FLK socket strip (1x 40-position); connection 2: IDC/FLK socket strip (4x 14-position); cable length: 2 m
Delivery: See availability
MACX MCR-S-MUX-TB-1 1292339 PHOENIX CONTACT HART Drive Board

PHOENIX CONTACT

Manufacturer Code: 1292339
Reference: MACX MCR-S-MUX-TB-1
Catalog Number: -
HART Drive Board
Delivery: See availability
ECM-UC-100A-MRTU 1191986 PHOENIX CONTACT Current converter for measuring direct, alternating and distorted c..

PHOENIX CONTACT

Manufacturer Code: 1191986
Reference: ECM-UC-100A-MRTU
Catalog Number: -
Current converter for measuring direct, alternating and distorted currents. Configuration via USB-C interface via web server (without 24 V DC). Current measurement ranges: 0 A ... 125 A. Modbus RTU Interface Configuration (RS-485), Standard Configuration, Push-in Connection
Delivery: See availability
ECM-UC-100A-UI-REL 1698172 PHOENIX CONTACT Current converter for measuring direct, alternating and distorted..

PHOENIX CONTACT

Manufacturer Code: 1698172
Reference: ECM-UC-100A-UI-REL
Catalog Number: -
Current converter for measuring direct, alternating and distorted currents. Configuration via USB-C interface via web server (without 24 V DC). Current measurement ranges: 0 A ... 125 A. Relay Output, Standard Configuration, Push-In Connection
Current converter for measuring direct, alternating and distorted currents. Configuration via USB-C interface via web server (without 24 V DC). Current measurement ranges: 0 A ... 125 A. Relay output, Transistor output, Standard configuration, Push-in connection
Delivery: See availability
CABLE-FLK40/4FLK14/HF/S7/3,0M 1464629 PHOENIX CONTACT Round cable made without halogens. Connection 1: Femal..

PHOENIX CONTACT

Manufacturer Code: 1464629
Reference: CABLE-FLK40/4FLK14/HF/S7/3,0M
Catalog Number: -
Round cable made without halogens. Connection 1: Female IDC/FLK connection (1x 40-poles). Connection 2: Female IDC/FLK connection (4x 14-pole). Cable length: 3 m
Cable
Assembled, halogen-free round cable; connection 1: IDC/FLK socket strip (1x 40-position); connection 2: IDC/FLK socket strip (4x 14-position); cable length: 3 m
Delivery: See availability
VIP-PA-4X14/26/ 2,0M/1756/041 1162507 PHOENIX CONTACT VARIOFACE VIP front adapter, with connected system cab..

PHOENIX CONTACT

Manufacturer Code: 1162507
Reference: VIP-PA-4X14/26/ 2,0M/1756/041
Catalog Number: -
VARIOFACE VIP front adapter, with connected system cables for ControlLogix 1756 I/O module, connectable up to 4 x 8 channels.
VIP VARIOFACE front adapter, with connected system cables for ControlLogix® 1756 I/O. Up to 4 x 8 channels can be connected., cable length: 2 m
VIP VARIOFACE front adapter, with connected system cables for ControlLogix® 1756 I/O. Up to 4 x 8 channels can be connected.
Delivery: See availability
ECM-UC-100A-MTCP 1191984 PHOENIX CONTACT Current converter for measuring direct, alternating and distorted c..

PHOENIX CONTACT

Manufacturer Code: 1191984
Reference: ECM-UC-100A-MTCP
Catalog Number: -
Current converter for measuring direct, alternating and distorted currents. Configuration via USB-C interface via web server (without 24 V DC). Current measurement ranges: 0 A ... 125 A. Modbus TCP (RJ45) Interface Configuration, Standard Configuration, Push-in Connection
Delivery: See availability
ECM-UC-10A-MTCP 1191970 PHOENIX CONTACT Current converter for measuring direct, alternating and distorted cu..

PHOENIX CONTACT

Manufacturer Code: 1191970
Reference: ECM-UC-10A-MTCP
Catalog Number: -
Current converter for measuring direct, alternating and distorted currents. Configuration via USB-C interface via web server (without 24 V DC). 4 current measurement ranges: 0 A ... 0.1 A to 0 A ... 12.5 A. Modbus TCP (RJ45) Interface Configuration, Standard Configuration, Push-in Connection
Delivery: See availability
EEM-RS485-PCM 1551889 PHOENIX CONTACT RS485-USB communication adapter for reading and configuring DC energy ..

PHOENIX CONTACT

Manufacturer Code: 1551889
Reference: EEM-RS485-PCM
Catalog Number: -
RS485-USB communication adapter for reading and configuring DC energy meters
Delivery: See availability
MINI MCR-2-IDS-I-I-PT 2905625 PHOENIX CONTACT Output signal conditioner for separating and transferring 0mA/..

PHOENIX CONTACT

Manufacturer Code: 2905625
Reference: MINI MCR-2-IDS-I-I-PT
Catalog Number: -
Output signal conditioner for separating and transferring 0mA/4mA signals... 20 mA from the control system to an intrinsically safe load in the Ex zone. With HART transparency, no-load voltage: 27 V DC, Standard configuration, Push-in connection
Delivery: See availability
MM-EE-EEM-MA550 1475401 PHOENIX CONTACT Multifunctional energy meter for direct measurement of electrical pa..

PHOENIX CONTACT

Manufacturer Code: 1475401
Reference: MM-EE-EEM-MA550
Catalog Number: -
Multifunctional energy meter for direct measurement of electrical parameters up to 600 V in the power grid. allows RS-485 communication and analysis of harmonic No. 63, operating temperature up to +70°C.
Delivery: See availability
MM-EE-EEM-MA550-4DI/2DO 1726498 PHOENIX CONTACT Multifunctional energy meter, with integrated Modbus/RTU int..

PHOENIX CONTACT

Manufacturer Code: 1726498
Reference: MM-EE-EEM-MA550-4DI/2DO
Catalog Number: -
Multifunctional energy meter, with integrated Modbus/RTU interface, compatible with multi-speed and digital input/output functions, can be used to measure electrical parameters up to 600 V, operating temperature up to +70 °C
Multifunctional energy meter, with Modbus/RTU communication, compatible with multirate function and digital input/output functions, usable to measure electrical parameters in the mains up to 600 V, operating temperature up to +70 °C
Delivery: See availability
MM-EE-EEM-MA570-R 1726496 PHOENIX CONTACT Multifunctional energy meter, with integrated Modbus/RTU/TCP inter..

PHOENIX CONTACT

Manufacturer Code: 1726496
Reference: MM-EE-EEM-MA570-R
Catalog Number: -
Multifunctional energy meter, with integrated Modbus/RTU/TCP interface, supports multi-speed functions, can be used to measure electrical parameters up to 600 V, operating temperature up to +70 °C
Multifunctional energy meter, with Modbus/RTU/TCP communication, compatible with multi-rate function, can be used to measure electrical parameters in the mains up to 600 V, operating temperature up to +70 °C
Delivery: See availability
MM-EE-EEM-MA570-R-4DI/2DO 1726500 PHOENIX CONTACT Multifunctional energy meter, with integrated Modbus/RTU/T..

PHOENIX CONTACT

Manufacturer Code: 1726500
Reference: MM-EE-EEM-MA570-R-4DI/2DO
Catalog Number: -
Multifunctional energy meter, with integrated Modbus/RTU/TCP interface, supporting multi-speed and digital input/output functions, used to measure electrical parameters up to 600 V, operating temperature up to +70 °C
Multifunctional energy meter, with Modbus/RTU/TCP communication, compatible with multirate function and digital input/output functions, usable to measure electrical parameters in the mains up to 600 V, operating temperature up to +70 °C
Delivery: See availability
TC-D37SUB-DI16-2EX-P-ETHA/FS 1642217 PHOENIX CONTACT Termination Carrier for 8 MACX Ex i NAMUR Dual Channel ..

PHOENIX CONTACT

Manufacturer Code: 1642217
Reference: TC-D37SUB-DI16-2EX-P-ETHA/FS
Catalog Number: -
Termination Carrier for 8 MACX Ex i NAMUR Dual Channel Signal Conditioners for Connection to Siemens SIMATIC ET 200SP HA, Digital Input Module, Safety-Oriented, F-DI 16X24VDC HA (6DL1136-6BA00-0PH1)
Delivery: See availability
TC-D37SUB-DO10-PS-P-ETHA/FS 1642466 PHOENIX CONTACT Termination Carrier for 10 PSR-MINI-SIL coupling relays ..

PHOENIX CONTACT

Manufacturer Code: 1642466
Reference: TC-D37SUB-DO10-PS-P-ETHA/FS
Catalog Number: -
Termination Carrier for 10 PSR-MINI-SIL coupling relays for connection to Siemens SIMATIC ET200SP HA, digital output module, safety-oriented, F-DQ10x24VDC/2A HA (6DL1136-6DA00-0PH1)
Delivery: See availability
MM-EE-EEM-EM157 1744499 PHOENIX CONTACT Single-phase energy meter for active power measurement with direct m..

PHOENIX CONTACT

Manufacturer Code: 1744499
Reference: MM-EE-EEM-EM157
Catalog Number: -
Single-phase energy meter for active power measurement with direct measurement in networks up to 276 V/45 A, with RS-485 interface and 2 pulse outputs, operating temperature up to +70 °C, certified according to the MID directive
Delivery: See availability
MM-EE-EEM-EM357 1744495 PHOENIX CONTACT Three-phase energy meter for measuring active power with direct meas..

PHOENIX CONTACT

Manufacturer Code: 1744495
Reference: MM-EE-EEM-EM357
Catalog Number: -
Three-phase energy meter for measuring active power with direct measurement in networks up to 480 V/100 A, with RS-485 interface and 2 pulse outputs, operating temperature up to +70 °C, certified according to the MID Directive
Delivery: See availability
PACT MCR-RA-BK 1760516 PHOENIX CONTACT Adapter for mounting on DIN rails. Only suitable for black current tr..

PHOENIX CONTACT

Manufacturer Code: 1760516
Reference: PACT MCR-RA-BK
Catalog Number: -
Adapter for mounting on DIN rails. Only suitable for black current transformer housings.
Delivery: See availability
EEM-XM357 1674511 PHOENIX CONTACT Three-phase energy meter with direct measurement up to 100 A AC, Modbus/RT..

PHOENIX CONTACT

Manufacturer Code: 1674511
Reference: EEM-XM357
Catalog Number: -
Three-phase energy meter with direct measurement up to 100 A AC, Modbus/RTU interface, 2 pulse outputs, 4 tariffs (via Modbus), operating temperature up to +70 °C, certified according to the MID directive
Delivery: See availability
EEM-XM377 1674501 PHOENIX CONTACT Three-phase energy meter with direct measurement up to 100 A AC, Modbus/TC..

PHOENIX CONTACT

Manufacturer Code: 1674501
Reference: EEM-XM377
Catalog Number: -
Three-phase energy meter with direct measurement up to 100 A AC, Modbus/TCP interface, operating temperature up to +70 °C, certified according to the MID directive
Delivery: See availability
MINI MCR-2-T-I-PT 2908829 PHOENIX CONTACT Temperature converter for converting and transmitting RTD and CT s..

PHOENIX CONTACT

Manufacturer Code: 2908829
Reference: MINI MCR-2-T-I-PT
Catalog Number: -
Temperature converter for converting and transmitting RTD and CT sensor signals to a load. Standard configuration, Push-in connection
Delivery: See availability
FA MCR-FMR-10K-1.5K-IP20-PT 1642716 PHOENIX CONTACT 10 kΩ resistor network in parallel, 1.5 kΩ in series for..

PHOENIX CONTACT

Manufacturer Code: 1642716
Reference: FA MCR-FMR-10K-1.5K-IP20-PT
Catalog Number: -
10 kΩ resistor network in parallel, 1.5 kΩ in series for the monitoring of floating contacts and proximity detectors. Monitoring of faults in the line by means of signal conditioners or digital inputs according to NAMUR IEC/EN 60947-5-6.
Delivery: See availability
FA MCR-FMR-10K-1K-IP20-PT 1642715 PHOENIX CONTACT 10 kΩ resistor network in parallel, 1 kΩ in series for mon..

PHOENIX CONTACT

Manufacturer Code: 1642715
Reference: FA MCR-FMR-10K-1K-IP20-PT
Catalog Number: -
10 kΩ resistor network in parallel, 1 kΩ in series for monitoring floating contacts and proximity detectors. Monitoring of faults in the line by means of signal conditioners or digital inputs according to NAMUR IEC/EN 60947-5-6.
Delivery: See availability
FA MCR-FMR-22K-620-IP20-PT 1642820 PHOENIX CONTACT 22 kΩ resistor network in parallel, 620 kΩ in series for ..

PHOENIX CONTACT

Manufacturer Code: 1642820
Reference: FA MCR-FMR-22K-620-IP20-PT
Catalog Number: -
22 kΩ resistor network in parallel, 620 kΩ in series for the monitoring of floating contacts and proximity detectors. Monitoring of faults in the line by means of signal conditioners or digital inputs according to NAMUR IEC/EN 60947-5-6.
Delivery: See availability
FA MCR-FMR-22K-680-IP20-PT 1642714 PHOENIX CONTACT 22 kΩ resistor network in parallel, 680 kΩ in series for ..

PHOENIX CONTACT

Manufacturer Code: 1642714
Reference: FA MCR-FMR-22K-680-IP20-PT
Catalog Number: -
22 kΩ resistor network in parallel, 680 kΩ in series for the monitoring of floating contacts and proximity detectors. Monitoring of faults in the line by means of signal conditioners or digital inputs according to NAMUR IEC/EN 60947-5-6.
Delivery: See availability
IOA MCR-RPSS-I-I 1085774 PHOENIX CONTACT HART Transparent Power & Input Signal Conditioner for Marshalling I..

PHOENIX CONTACT

Manufacturer Code: 1085774
Reference: IOA MCR-RPSS-I-I
Catalog Number: -
HART Transparent Power & Input Signal Conditioner for Marshalling I/O VIP Base Elements: Transmits 0/4 mA Signals ... 20 mA at one load (active or passive). 3-way galvanic separation, SIL 2, SC 3 according to IEC 61508
Delivery: See availability
IOA MCR-RTD-I 1007728 PHOENIX CONTACT Temperature converter for Marshalling base elements VIP I/O: converts ..

PHOENIX CONTACT

Manufacturer Code: 1007728
Reference: IOA MCR-RTD-I
Catalog Number: -
Temperature converter for Marshalling base elements VIP I/O: converts signals from heat resistances and transmits a 0/4 mA signal ... 20 mA at one load (active or passive). Freely parameterizable.
Delivery: See availability
IOA MCR-TC-I 1007722 PHOENIX CONTACT Temperature converter for Marshalling base elements VIP I/O: converts s..

PHOENIX CONTACT

Manufacturer Code: 1007722
Reference: IOA MCR-TC-I
Catalog Number: -
Temperature converter for Marshalling base elements VIP I/O: converts signals from thermocouples and mV sources and transmits a signal of 0/4 mА ... 20 mA at one load (active or passive). Freely parameterizable.
Delivery: See availability
MINI MCR-EX-T-I 2908813 PHOENIX CONTACT Ex i-Temperature converter for intrinsically safe signal conversion ..

PHOENIX CONTACT

Manufacturer Code: 2908813
Reference: MINI MCR-EX-T-I
Catalog Number: -
Ex i-Temperature converter for intrinsically safe signal conversion and transmission from RTD and CT sensors to a load in a safe area. Standard Configuration, Safety Integrity Level (SIL, IEC 61508): 2, Systematic Capability: 3, Screw Connection
Delivery: See availability
MINI MCR-EX-T-I-PT 2908814 PHOENIX CONTACT Ex i-Temperature converter for intrinsically safe signal conversi..

PHOENIX CONTACT

Manufacturer Code: 2908814
Reference: MINI MCR-EX-T-I-PT
Catalog Number: -
Ex i-Temperature converter for intrinsically safe signal conversion and transmission from RTD and CT sensors to a load in a safe area. Standard Configuration, Safety Integrity Level (SIL, IEC 61508): 2, Systematic Capability: 3, Push-in Connection
Delivery: See availability
MINI MCR-EX-PHM-PT 1825064 PHOENIX CONTACT Wildcard module without function for applying intrinsically unsaf..

PHOENIX CONTACT

Manufacturer Code: 1825064
Reference: MINI MCR-EX-PHM-PT
Catalog Number: -
Wildcard module without function for applying intrinsically unsafe signal cables for users, with plug-in push-in connection terminals.
Delivery: See availability
IOA MCR-EX-RPSS-I-I 1085761 PHOENIX CONTACT Intrinsically Safe Power and Input Signal Conditioner, with HART..

PHOENIX CONTACT

Manufacturer Code: 1085761
Reference: IOA MCR-EX-RPSS-I-I
Catalog Number: -
Intrinsically Safe Power and Input Signal Conditioner, with HART Transparency, for Marshalling VIP I/O Base Elements: Transmits 0/4 mA signals ... 20 mA from the Ex zone to a load (active or passive) in the safe zone. 3-way galvanic separation, SIL 2, SC 3 according to IEC 61508
Delivery: See availability
IOA MCR-EX-RTD-I 1085764 PHOENIX CONTACT Intrinsically Safe Temperature Converter for Base Elements Marshall..

PHOENIX CONTACT

Manufacturer Code: 1085764
Reference: IOA MCR-EX-RTD-I
Catalog Number: -
Intrinsically Safe Temperature Converter for Base Elements Marshalling I/O VIP converts the signals from the thermoresistors installed in the Ex zone and transmits a 0/4 mA signal ... 20 mA at a load (active or passive) in the safe zone. Freely parameterizable.
Delivery: See availability
IOA MCR-EX-TC-I 1085766 PHOENIX CONTACT Intrinsically Safe Temperature Converter for Marshalling VIP I/O Bas..

PHOENIX CONTACT

Manufacturer Code: 1085766
Reference: IOA MCR-EX-TC-I
Catalog Number: -
Intrinsically Safe Temperature Converter for Marshalling VIP I/O Base Elements: Converts signals from thermocouples installed in the Ex zone and transmits a 0/4 mA signal ... 20 mA at a load (active or passive) in the safe zone. Freely parameterizable.
Delivery: See availability
VIP-3/PT/M12/F/12P 1737863 PHOENIX CONTACT VARIOFACE module with push-in connection and M12 connector

PHOENIX CONTACT

Manufacturer Code: 1737863
Reference: VIP-3/PT/M12/F/12P
Catalog Number: -
VARIOFACE module with push-in connection and M12 connector
Delivery: See availability
CAB-D37/F/F/HF/S/F-DO/2M/ETHA 1673219 PHOENIX CONTACT Ready-made, shielded and halogen-free round cable cont..

PHOENIX CONTACT

Manufacturer Code: 1673219
Reference: CAB-D37/F/F/HF/S/F-DO/2M/ETHA
Catalog Number: -
Ready-made, shielded and halogen-free round cable; control: SIEMENS ET 200SP HA (F-DQ10x24VDC/2A HA (6DL1136-6DA00-0PH1)); Connection 1: Female connection D-SUB (1x 37-poles) (Connected poles: 20); Connection 2: Female connection D-SUB (1x 37-poles) (Connected poles: 20); Cable length: 2 m
Delivery: See availability
CAB-D37/F/F/HF/S/F-DO/3M/ETHA 1673263 PHOENIX CONTACT Ready-made, shielded and halogen-free round cable cont..

PHOENIX CONTACT

Manufacturer Code: 1673263
Reference: CAB-D37/F/F/HF/S/F-DO/3M/ETHA
Catalog Number: -
Ready-made, shielded and halogen-free round cable; control: SIEMENS ET 200SP HA (F-DQ10x24VDC/2A HA (6DL1136-6DA00-0PH1)); Connection 1: Female connection D-SUB (1x 37-poles) (Connected poles: 20); Connection 2: Female connection D-SUB (1x 37-poles) (Connected poles: 20); Cable length: 3 m
Delivery: See availability
CAB-D37/F/F/HF/S/F-DO/6M/ETHA 1673247 PHOENIX CONTACT Ready-made, shielded and halogen-free round cable cont..

PHOENIX CONTACT

Manufacturer Code: 1673247
Reference: CAB-D37/F/F/HF/S/F-DO/6M/ETHA
Catalog Number: -
Ready-made, shielded and halogen-free round cable; control: SIEMENS ET 200SP HA (F-DQ10x24VDC/2A HA (6DL1136-6DA00-0PH1)); Connection 1: Female connection D-SUB (1x 37-poles) (Connected poles: 20); Connection 2: Female connection D-SUB (1x 37-poles) (Connected poles: 20); Cable length: 6 m
Delivery: See availability
VIP-PA-PWR/20XOE/ 3,0M/1756 1586550 PHOENIX CONTACT VARIOFACE VIP Front Adapter, with Assembled and Shielded..

PHOENIX CONTACT

Manufacturer Code: 1586550
Reference: VIP-PA-PWR/20XOE/ 3,0M/1756
Catalog Number: -
VARIOFACE VIP Front Adapter, with Assembled and Shielded Round Cable for ControlLogix® 1756 I/O Module; 1 x 20 individual conductors can be connected
Delivery: See availability

products sitemap