PHOENIX CONTACT  IB IL 24 DI16-2MBD-PAC/SN 2878120 - Image 1

Images are for illustrative purposes only. Please refer to data sheet for details.

IB IL 24 DI16-2MBD-PAC/SN 2878120 PHOENIX CONTACT Inline terminal

Reference: IB IL 24 DI16-2MBD-PAC/SN

Code: 2878120

Manufacturer: PHOENIX CONTACT

Description:

Inline terminal
Inline, Digital input module, Digital inputs: 16, 24 V DC, connection technology: 3 conductors, transmission speed on the local bus: 2 MBit/s, protection index: IP20, including inline connectors and marking fields, individually numbered connectors

Categories:

  • PHOENIX CONTACT > I/O

Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX CONTACT

  • More Info
  • PDF
  • Reviews
Guarantee, repair and return.

* This article may be obsolete. Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

LAST VIEWED

MORE INFO

Key Commercial Data

Orderkey2878120
Packing unit1 pc
Catalog pagePage 271 (AX-2009)
GTIN4046356298773
Weight per Piece (excluding packing)122.000 g
Custom tariff number85389091
Country of originDE (Germany)

Note

Utilization restriction1

Dimensions

Dimensional drawing
Width48.8 mm
Height140.5 mm
Depth71.5 mm
Note on dimensionsHousing dimensions

Ambient conditions

Ambient temperature (operation)-25 °C ... 55 °C
Ambient temperature (storage/transport)-25 °C ... 85 °C
Permissible humidity (operation)10 % ... 95 % (according to DIN EN 61131-2)
Permissible humidity (storage/transport)10 % ... 95 % (according to DIN EN 61131-2)
Air pressure (operation)70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)70 kPa ... 106 kPa (up to 3000 m above sea level)
Degree of protectionIP20
IP20

General

Mounting typeDIN rail
Net weight122 g
Note on weight specificationswithout plug
Operating modeProcess data mode with one word

Interfaces

DesignationInline local bus
Connection methodInline data jumper
Transmission speed2 Mbps

Inline potentials

DesignationCommunications power (UL)
Supply voltage7.5 V DC (via voltage jumper)
Current consumptionmax. 80 mA
Power consumptionmax. 0.6 W
DesignationSegment circuit supply (US)
Supply voltage24 V DC (via voltage jumper)
Supply voltage range19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current consumptionmax. 4 A

Digital inputs

Input nameDigital inputs
Description of the inputEN 61131-2 type 1
Connection methodSpring-cage connection
Connection technology3-wire
Number of inputs16
Typical response time< 1 ms
Type of protectionShort-circuit and overload protection
Input voltage24 V DC
Input voltage range "0" signal-3 V DC ... 5 V DC
Input voltage range "1" signal15 V DC ... 30 V DC
Nominal input current at UINmin. 3 mA (at nominal voltage)

Electrical isolation

Test section5 V supply, incoming remote bus/7.5 V supply (bus logics) 500 V AC 50 Hz 1 min.
5 V supply, outgoing remote bus/7.5 V supply (bus logics) 500 V AC 50 Hz 1 min.
7.5 V supply (bus logics)/24 V supply (I/O) 500 V AC 50 Hz 1 min.
24 V supply (I/O) / functional earth ground 500 V AC 50 Hz 1 min.

Standards and Regulations

Protection classIII, IEC 61140, EN 61140, VDE 0140-1

Environmental Product Compliance

China RoHSEnvironmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values

Classifications

Latest Customer Reviews

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.