PSI-MOS-RS422/FO1300 E 2708575 PHOENIX CONTACT Fiber optic converter with integrated optical diagnostics, al.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

PSI-MOS-RS422/FO1300 E 2708575 PHOENIX CONTACT Fiber optic converter with integrated optical diagnostics, al..

PSI-MOS-RS422/FO1300 E




Ship on today

Fiber optic converter with integrated optical diagnostics, alarm contact, for RS-422/RS-485 4 wire/ INTERBUS up to 2 Mbps, termination device with one fiber optic interface (SC duplex), 1300 nm, for fiberglass cable

More details


INTERFACE Signal converters, switching devices, and power supply units - PHOENIX CONTACT

Interface converter, separators and modems. Serial - PHOENIX CONTACT

* Brand new produt in its original packing covered by the warranties and certifications provided by PHOENIX_CONTACT

*This price is per unit and is the net value (not including taxes if applicable).

Related products

More info


Width35 mm
Height105 mm
Depth103 mm

Ambient conditions

Ambient temperature (operation)-20 °C ... 60 °C
Ambient temperature (storage/transport)-40 °C ... 85 °C
Permissible humidity (operation)30 % ... 95 % (non-condensing)
Altitude5000 m (For restrictions see manufacturer's declaration)
Degree of protectionIP20
Noise immunityEN 61000-6-2:2005


Transmission channels2 (1/1) RD, TD, full duplex
Bit distortion, input± 35 % (permitted)
Bit distortion, output< 6.25 %
Electrical isolationVCC // RS-422
Test voltage data interface/power supply1.5 kVrms (50 Hz, 1 min.)
Electromagnetic compatibilityConformance with EMC directive 89/336/EC
Noise emissionEN 55011
Net weight190.68 g
Housing materialPA 6.6-FR
MTBF544 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day))
113 Years (Telcordia standard, 40°C temperature, 34.25% operating cycle (5 days a week, 12 hours a day))
ATEXEx II 3 G Ex nA nC IIC T4 Gc X (Please follow the special installation instructions in the documentation!)
UL, USA / Canada508 listed
508 recognized

Power supply

Supply voltage range18 V DC ... 32 V DC
Typical current consumption110 mA (24 V DC)
Connection methodCOMBICON plug-in screw terminal block

Serial interface

Interface 1RS-422 interface in acc. with ITU-T V.11, EIA/TIA-422, DIN 66348-1
Operating modeFull duplex
Connection methodPluggable screw connection
Transmission mediumCopper
Transmission length≤ 1000 m (depending on the data rate, with shielded, twisted data cable)
Conductor cross section solid min.0.2 mm²
Conductor cross section solid max.2.5 mm²
Conductor cross section flexible min.0.2 mm²
Conductor cross section flexible max.2.5 mm²
Conductor cross section AWG min.24
Conductor cross section AWG max.14
Serial transmission speed≤ 2 Mbps

Optical interface FO

Wavelength1300 nm
Transmission length incl. 3 dB system reserve27 km (With F-G 50/125 0.7 dB/km at 1300 nm)
22 km (with F-G 62.5/125 0.8 dB/km at 1300 nm)
45 km (With F-E 9/125 0,4 dB/km at 1300 nm)
Transmission mediumMulti-mode fiberglass
Single-mode fiberglass
Transmission protocolTransparent to protocol for RS-422 interface
Connection methodSC duplex

Digital outputs

Output nameRelay output
Output descriptionAlarm output
Number of outputs1
Maximum switching voltage60 V DC
42 V AC
Limiting continuous current1 A

Datasheet - PDF

PHOENIX CONTACT-2708575-PSI-MOS-RS422/FO1300 EEnglish128 KbytesPHOENIX CONTACT-2708575-PSI-MOS-RS422/FO1300 E

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
  Add review