ANUNCIAR
FL PSE 2TX 2891013 PHOENIX CONTACT Ethernet module View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

FL PSE 2TX 2891013 PHOENIX CONTACT Ethernet module

FL PSE 2TX

2891013

PHOENIX_CONTACT

Ethernet module

Factoryline Power over Ethernet (PSE) module for Midspan power supply according to IEEE 802.3af, two PoE power ports, no configuration required, operation possible with 10 Mbits/s and 100 Mbits/s networks

More details


Data and telecommunication > Network switch

I/O

Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT

Total: $744.46
Unit price: $744.46
This price is per unit and is the net value (not including taxes if applicable).

If our price is not the best, please ask us for a quote. Ask for a quotation

Related products

Best sellers

More info



Key Commercial Data

Orderkey2891013
Packing unit1 pc
Catalog pagePage 401 (C-6-2017)
GTIN4046356076043
Weight per Piece (excluding packing)320.000 g
Custom tariff number85176200
Country of originDE (Germany)

Note

Utilization restrictionEMC: class A product, see manufacturer's declaration in the download area

Dimensions

Width45 mm
Height99 mm
Depth112 mm

Ambient conditions

Degree of protectionIP20
Ambient temperature (operation)0 °C ... 55 °C
Ambient temperature (storage/transport)-20 °C ... 70 °C
Permissible humidity (operation)30 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)30 % ... 95 % (non-condensing)
Air pressure (operation)86 kPa ... 108 kPa (2000 m above sea level)
Air pressure (storage/transport)66 kPa ... 108 kPa (3500 m above sea level)

Interfaces

Interface 1Ethernet (RJ45)
No. of ports2 (RJ45 ports)
Transmission physicsCopper
Transmission speed10/100 Mbps
Transmission length100 m (Between transmitter / receiver)
Signal LEDsPoE detection

Function

Basic functionsPSE/midspan, complies with IEEE 802.3af
Status and diagnostic indicatorsLEDs: US, PoE detection per port

Network expansion parameters

Maximum conductor length (twisted pair)100 m

Supply voltage

Supply voltage24 V DC (via COMBICON; max. conductor cross section 2.5 mm²)
Residual ripple3.6 VPP(within the permitted voltage range)
Supply voltage range18.5 V DC ... 30.5 V DC
Typical current consumptiontyp. 100 mA (During no load; approx. 1800 mA at 24 V at the input with maximum load and 25°C ambient temperature)

General

Mounting typeDIN rail
Type AXStand-alone
Net weight320 g
Housing materialPolyamide (PA 6.6)

Standards and Regulations

Electromagnetic compatibilityConformance with EMC Directive 2014/30/EU
Noise emissionEN 61000-6-4
Noise immunityEN 61000-6-2:2005
Vibration (storage/transport)5g, 150 Hz, in acc. with IEC 60068-2-6
Free from substances that could impair the application of coatingIn acc. with VW specification
Connection in acc. with standardCUL
Vibration (operation)in acc. with IEC 60068-2-6: 5g, 150 Hz

Environmental Product Compliance

China RoHSEnvironmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”

Classifications


ETIM for 2891013 Data networking products (EC000734)
Feature Name Feature Value
Ethernet (EF003535) Yes
Number of other ports (EF007643) 2
Mounting method (EF000003) Other
Manageable (EF004912) Yes
Degree of protection (IP) (EF005474) IP20
Height (EF000040) 99 mm
Width (EF000008) 45.2 mm
Depth (EF000049) 114.293112 mm

Datasheet - PDF

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.