No products
Product successfully added to your shopping cart
View larger
PI-EX-RPSS 2865243 PHOENIX CONTACT Repeater power supply
PI-EX-RPSS
2865243
PHOENIX_CONTACT
Repeater power supply
Intrinsically safe analogue input: power signal conditioner, with HART transparency. It powers intrinsically safe 2-conductor measurement transducers installed in the Ex zone and transmits the 4 mA signal ... 20 mA towards a load in the safe zone. 3-way galvanic separation (input/output/feed).
INTERFACE Components (IF)
Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
Best sellers
▲More info
▲Key Commercial Data
| Orderkey | 2865243 |
|---|---|
| Packing unit | 1 pc |
| Catalog page | Page 264 (NTK-2010) |
| GTIN | 4046356164290 |
| Weight per Piece (excluding packing) | 97.300 g |
| Custom tariff number | 85437090 |
| Country of origin | DE (Germany) |
Note
| Utilization restriction | EMC: class A product, see manufacturer's declaration in the download area |
|---|
Ambient conditions
| Ambient temperature (operation) | -20 °C ... 60 °C |
|---|---|
| Ambient temperature (storage/transport) | -40 °C ... 80 °C |
| Permissible humidity (operation) | 10 % ... 95 % (non-condensing) |
Input data
| Signal input | Intrinsically safe |
|---|---|
| Current input signal | 4 mA ... 20 mA |
| Transmitter supply voltage | > 16 V (at 20 mA) |
| > 15.3 V (at 22.5 mA) |
Output data
| Signal output | Current output |
|---|---|
| Current output signal | 4 mA ... 20 mA (active) |
| 4 mA ... 20 mA (14 ... 26 V ext. source voltage) | |
| Load/output load current output | < 600 Ω (at 20 mA) |
| < 525 Ω (at 22.5 mA) | |
| Output ripple | < 20 mVrms |
| Output behavior in the event of an error | 0 mA (Cable break in the input) |
| ≥ 24 mA (Cable short-circuit in the input) |
Power supply
| Supply voltage range | 19.2 V DC ... 30 V DC |
|---|---|
| Max. current consumption | < 60 mA (at 24 V DC) |
| Power dissipation | < 1.1 W (at 24 V DC / 20 mA) |
General
| No. of channels | 1 |
|---|---|
| Maximum transmission error | < 0.1 % (of final value) |
| Transmission error, typical | < 0.05 % (of final value) |
| Maximum temperature coefficient | < 0.01 %/K |
| Step response (10-90%) | < 600 µs (for 4 mA ... 20 mA step) |
| Status display | Green LED (supply voltage, PWR) |
| Flammability rating according to UL 94 | V0 |
| Degree of pollution | 2 |
| Overvoltage category | II |
| Housing material | PBT and polyamide PA non-reinforced |
| Color | green |
| Designation | Input/output/power supply |
| Electrical isolation | 300 Vrms(Rated insulation voltage (overvoltage category II; degree of pollution 2, safe isolation as per EN 61010-1)) |
| 2.5 kV (50 Hz, 1 min., test voltage) | |
| Designation | Input/output |
| Electrical isolation | 375 V (Peak value in accordance with EN 60079-11) |
| Designation | Input/power supply |
| Electrical isolation | 375 V (Peak value in accordance with EN 60079-11) |
| Conformance | CE-compliant, additionally EN 61326 |
| ATEX | II (1) G [Ex ia] IIC |
| II (1) D [Ex iaD] | |
| II 3 (1) G Ex nA [ia] IIC T4 | |
| Functional Safety (SIL) | SIL 2 according to IEC 61508 |
| SIL | 2 |
Safety characteristic data
| Integrity requirement | IEC 61508 - Low demand |
|---|---|
| Designation | Repeater power supply operation |
| Equipment type | Type A |
| Safety Integrity Level (SIL) | 2 |
| Safe Failure Fraction (SFF) | 90.9 % |
| λSU | 1.51 x 10-7(151 FIT) |
| λSD | 0 |
| λDU | 4.1 x 10-8(41 FIT) |
| λDD | 2.63 x 10-7(263 FIT) |
| Probability of a hazardous failure on demand (PFDAVG) | 1.96 x 10-4(1 year) |
| 3.74 x 10-4(2 years) | |
| 9.07 x 10-4(5 years) | |
| Diagnostic coverage (DC) | DCS= 0%, DCD= 86% |
| Integrity requirement | IEC 61508 - Low demand |
| Designation | Input isolating amplifier (4 ... 20 mA) |
| Equipment type | Type A |
| Safety Integrity Level (SIL) | 2 |
| Safe Failure Fraction (SFF) | 91.2 % |
| λSU | 1.52 x 10-7(152 FIT) |
| λSD | 0 |
| λDU | 3.8 x 10-8(38 FIT) |
| λDD | 2.44 x 10-7(244 FIT) |
| Probability of a hazardous failure on demand (PFDAVG) | 1.81 x 10-4(1 year) |
| 3.46 x 10-4(2 years) | |
| 8.41 x 10-4(5 years) | |
| Diagnostic coverage (DC) | DCS= 0%, DCD= 86% |
Safety data
| Max. output voltage Uo | 25.2 V |
|---|---|
| Max. output current Io | 93 mA |
| Max. output power Po | 590 mW |
| Group | IIB |
| Max. external inductivity Lo | 4 mH |
| Max. external capacity Co | 820 nF |
| Group | IIC |
| Max. external inductivity Lo | 2 mH |
| Max. external capacity Co | 107 nF |
| Safety-related maximum voltage Um | 253 V AC |
Standards and Regulations
| Flammability rating according to UL 94 | V0 |
|---|---|
| Conformance | CE-compliant, additionally EN 61326 |
| ATEX | II (1) G [Ex ia] IIC |
| II (1) D [Ex iaD] | |
| II 3 (1) G Ex nA [ia] IIC T4 | |
| Group | IIB |
| IIC |
Environmental Product Compliance
| REACh SVHC | Lead 7439-92-1 |
|---|---|
| China RoHS | Environmentally Friendly Use Period = 50 |
| For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
Classifications
eCl@ss 4.027210120eCl@ss 4.127210120eCl@ss 5.027210120eCl@ss 5.127210100eCl@ss 6.027210100eCl@ss 7.027210120eCl@ss 8.027210120eCl@ss 9.027210120
Datasheet - PDF
▲| Title: | Size: | Type: |
|---|---|---|
| PDF CATALOG PHOENIX INTERFACE TECHNOLOGY AND SWITCHING DEVICES EN.pdf | 29 Mbytes |
|
| PHOENIX CONTACT-2865243-PI-EX-RPSS | 149 Kbytes |
|
Reviews (0) ▲
No customer reviews for the moment.
| Rating: |
|
| Name: | |
| Email: | |
| Subject: | |
| Text: | |
| Do you recommend this product to buy? | |
|
|
|
| Add review | |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.