MCR-S-1-5-UI-SW-DCI-NC 2814731 PHOENIX CONTACT MCR current transducer, programmable and configurable, for me.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

MCR-S-1-5-UI-SW-DCI-NC 2814731 PHOENIX CONTACT MCR current transducer, programmable and configurable, for me..

MCR-S-1-5-UI-SW-DCI-NC

2814731

PHOENIX_CONTACT

Available

Ship on today

MCR current transducer, programmable and configurable, for measuring direct, alternating and distorted currents, with relay and transistor output, input current 0 ... 0.2 A to 0 ... 11 A, unconfigured

More details


Energy Meters Control Analizers

INTERFACE Signal converters, switching devices, and power supply units - PHOENIX CONTACT

Energy meters. Monitoring - PHOENIX CONTACT

* Brand new produt in its original packing covered by the warranties and certifications provided by PHOENIX_CONTACT

QuantityPrice
1+282,53 €
2+276,32 €
3+274,40 €
*This price is per unit and is the net value (not including taxes if applicable).

Related products

More info



Dimensions

Width22.5 mm
Height99 mm
Depth114.5 mm

Ambient conditions

Ambient temperature (operation)-20 °C ... 60 °C
Ambient temperature (storage/transport)-40 °C ... 85 °C
Degree of protectionIP20

Input data

InputCurrent measuring input
Number of inputs3
Configurable/programmableYes, unconfigured
Input current range0 A ... 11 A (AC/DC)
Operate threshold2 % (of measuring range nominal value 1/5/10 A)
Setting range for min. input current0 A ... 0.2 A
Setting range for max. input current0 A ... 11 A
Impulse formAC, DC or distorted currents
Overload capacity2 x IN (continuous)
Surge strength20 x IN (1 s)
Frequency measuring range15 Hz ... 400 Hz
Connection methodScrew connection

Output data

Output nameVoltage output / current output
Configurable/programmableYes, unconfigured
Voltage output signal0 V ... 10 V
2 V ... 10 V
-10 V ... 10 V
0 V ... 5 V
1 V ... 5 V
-5 V ... 5 V
10 V ... 0 V
10 V ... 2 V
10 V ... -10 V
5 V ... 0 V
5 V ... 1 V
5 V ... -5 V
Current output signal0 mA ... 20 mA
4 mA ... 20 mA
20 mA ... 0 mA
20 mA ... 4 mA
Load/output load voltage output> 10 kΩ
Load/output load current output< 500 Ω

Switching output

Output nameRelay output
Contact type1 PDT
Contact materialAgSnO, hard gold-plated
Maximum switching voltage30 V AC
36 V DC
250 V AC (when the gold layer is destroyed)
Limiting continuous current50 mA
2 A (when the gold layer is destroyed)
Output nameTransistor output, pnp
Output voltage range19 V ... 29 V (supply voltage - 1 V)
Continuous load current80 mA (Not short-circuit proof)
Setting range of the threshold value1 % ... 110 %
Setting range of the response delay0.1 s ... 20 s
Status displayYellow LED

Power supply

Supply voltage range20 V DC ... 30 V DC
Max. current consumption< 50 mA (without load)

Connection data

Connection methodScrew connection
Conductor cross section solid min.0.2 mm²
Conductor cross section solid max.2.5 mm²
Conductor cross section AWG min.24
Conductor cross section AWG max.14
Conductor cross section flexible min.0.2 mm²
Conductor cross section flexible max.2.5 mm²
Stripping length8 mm
Screw threadM3

General

Maximum transmission error< 0.5 % (of nominal range value under nominal conditions)
Temperature coefficient, typical< 0.025 %/K
Step response (10-90%)330 ms (with AC)
40 ms (with DC)
Status displayGreen LED
Overvoltage categoryIII
Pollution degree2
Rated insulation voltage300 V AC (to earth)
Test voltage input/output4 kV (50 Hz, 1 min.)
Test voltage input/power supply4 kV (50 Hz, 1 min.)
Test voltage output/power supply500 V (50 Hz, 1 min.)
Electromagnetic compatibilityConformance with EMC Directive 2004/108/EC
Noise emissionEN 61000-6-4
Noise immunityEN 61000-6-2
Colorgreen
Housing materialPolyamide PA non-reinforced
Mounting positionany
ConformanceCE-compliant
UL, USA / CanadaClass I, Zone 2, AEx nC IIC T6, Ex nC IIC T6

Datasheet - PDF

Title:Language:Size:Type:
PHOENIX CONTACT-2814731-MCR-S-1-5-UI-SW-DCI-NCEnglish137 KbytesPHOENIX CONTACT-2814731-MCR-S-1-5-UI-SW-DCI-NC

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review