ELR 2+1-230AC/500AC-37 2297280 PHOENIX CONTACT Three-phase solid-state contactor with 230 V AC input, 37 A o.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

ELR 2+1-230AC/500AC-37 2297280 PHOENIX CONTACT Three-phase solid-state contactor with 230 V AC input, 37 A o..

ELR 2+1-230AC/500AC-37




Ship on today

Three-phase solid-state contactor with 230 V AC input, 37 A output current, zero voltage switch, optionally with thermal fuse

More details

Programmable Logic Controllers Plcs

INTERFACE Signal converters, switching devices, and power supply units - PHOENIX CONTACT

Solid state relays and power electronics. Relay - PHOENIX CONTACT

* Brand new produt in its original packing covered by the warranties and certifications provided by PHOENIX_CONTACT

1+212,98 €
2+208,49 €
3+207,94 €
*This price is per unit and is the net value (not including taxes if applicable).

Related products

More info


Width147.5 mm
Height99 mm
Depth114.5 mm

Ambient conditions

Ambient temperature (operation)-25 °C ... 70 °C
Ambient temperature (storage/transport)-25 °C ... 70 °C
Degree of protectionIP20

Input data

Input nameDevice supply
Mains frequency50 Hz
60 Hz
Protective circuitSurge protection Varistor
Status displayYellow LED
IndicationRed LED
Input nameControl input right/left
Rated actuating voltage UC230 V AC
Voltage range with reference to UC0.4 ... 1.1
Rated actuating current IC12.5 mA
Switching threshold48 V AC (“0” signal)
96 V AC (“1” signal)

Output data

Output nameAC output
Nominal output voltage500 V AC
Nominal output voltage range48 V AC ... 575 V AC
Periodic peak reverse voltage1200 V
Mains frequency50 Hz
60 Hz
Rated operating current at AC-5137 A
Rated operating current at AC-53a25 A
Leakage current6 mA
Residual voltage< 1.5 V
Surge current1300 A (t = 10 ms)
Max. load value9000 A2s
Type of protectionRCV circuit
Surge voltage protection> 575 V AC

Connection data, control circuit

Connection nameControl circuits
Connection methodScrew connection
Stripping length8 mm
Screw threadM4
Conductor cross section solid0.5 mm² ... 16 mm²
Conductor cross section flexible0.5 mm² ... 16 mm²
Conductor cross section AWG20 ... 6


Test voltage input/output5 kVrms
Switching frequency≤ 1 Hz
Mounting positionVertical (horizontal DIN rail)
Assembly instructionsCan be aligned with spacing = 40 mm
Operating mode100% operating factor
DesignationAir clearances and creepage distances between the power circuits
Standards/regulationsDIN EN 50178
InsulationBasic insulation
Pollution degree2
Overvoltage categoryIII
Standards/regulationsEN 60947

Datasheet - PDF

PHOENIX CONTACT-2297280-ELR 2+1-230AC/500AC-37English120 KbytesPHOENIX CONTACT-2297280-ELR 2+1-230AC/500AC-37

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
  Add review