Product successfully added to your shopping cart
MINI MCR-SL-CVS-24-5-10-NC
2902822
PHOENIX_CONTACT
1
Constant voltage source, input voltage 9.6 - 30 V DC, output voltage 10 V, 7.5 V, 5 V, 2.5 V DC, electrically isolated, can be configured via DIP switches, screw connection technology, standard configuration
INTERFACE Components (IF)
* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
Thank you for your interest in our products; we hope the delivery time indicated is to your convenience.
While the order is being processed you can select the type of shipment that best suits your needs: 24-hour air express, standard 48-72 hour land, etc.
The 6.2 mm wide configurable MINI MCR-SL-CVS-24-10-5 constant voltage source is used to generate high precision constant voltages.
The input voltage can fall between 9.6 V DC and 30 V DC.
The DIP switches accessible from the side of the housing enable configuration of the 10 V DC, 5 V DC, 7.5 V DC, and 2.5 V DC output voltages.
The input voltage can be applied either via connection terminal blocks on the modules or in conjunction with the DIN rail connector.
Width | 6.2 mm |
---|---|
Height | 93.1 mm |
Depth | 102.5 mm |
Ambient temperature (operation) | -20 °C ... 65 °C |
---|---|
Ambient temperature (storage/transport) | -40 °C ... 85 °C |
Degree of protection | IP20 |
Voltage input signal | 9.6 V DC ... 30 V DC |
---|
Configurable/programmable | Yes, preconfigured |
---|---|
Max. output voltage | 10 V DC |
7.5 V DC | |
5 V DC | |
2.5 V DC | |
Output current | ≤ 30 mA |
Short-circuit current | approx. 32 mA |
Nominal supply voltage | 24 V DC |
---|---|
Supply voltage range | 9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715)) |
Max. current consumption | < 25 mA (10 V output with 30 mA load at 24 V DC IN) |
< 65 mA (10 V output with 30 mA load at 9.6 V DC IN) | |
< 50 mA (10 V voltage output with 30 mA load at 12 V DC IN) | |
< 20 mA (10 V voltage output with 30 mA load at 30 V DC IN) | |
Power consumption | < 600 mW (at 24 V IN) |
< 624 mW (at 9.6 V IN) | |
< 564 mW (At 12 V IN) | |
< 540 mW (at 30 V IN) |
Connection method | Screw connection |
---|---|
Conductor cross section solid min. | 0.2 mm² |
Conductor cross section solid max. | 2.5 mm² |
Conductor cross section AWG min. | 26 |
Conductor cross section AWG max. | 12 |
Conductor cross section flexible min. | 0.2 mm² |
Conductor cross section flexible max. | 2.5 mm² |
Stripping length | 12 mm |
Screw thread | M3 |
Maximum transmission error | ≤ 0.1 % (of final value) |
---|---|
≤ 0.5 % (Without adjustment) | |
Maximum temperature coefficient | < 0.01 %/K |
Temperature coefficient, typical | < 0.002 %/K |
Setting range comparison | ± 300 mV |
Electrical isolation | Basic insulation according to EN 61010 |
Overvoltage category | II |
Pollution degree | 2 |
Rated insulation voltage | 50 V AC/DC |
Test voltage input/output | 1.5 kV (50 Hz, 1 min.) |
Electromagnetic compatibility | Conformance with EMC Directive 2004/108/EC |
Noise emission | EN 61000-6-4 |
Noise immunity | EN 61000-6-2 When being exposed to interference, there may be minimal deviations. |
Color | green |
Housing material | PBT |
Mounting position | any |
Assembly instructions | The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715. |
Conformance | CE-compliant |
ATEX | Ex II 3 G Ex nA IIC T4 Gc X |
UL, USA / Canada | UL 508 Listed |
Class I, Div. 2, Groups A, B, C, D T6 | |
Class I, Zone 2, Group IIC | |
Certificate of classification | DNV GL 14085-15HH |
Title: | Size: | Type: |
---|---|---|
PDF CATALOG PHOENIX INTERFACE TECHNOLOGY AND SWITCHING DEVICES EN.pdf | 27 Mbytes | |
PHOENIX CONTACT-2902822-MINI MCR-SL-CVS-24-5-10-NC | 132 Kbytes |
No customer reviews for the moment.
Rating: | |
Name: | |
Email: | |
Subject: | |
Text: | |
Do you recommend this product to buy? | |
Add review |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.