Product successfully added to your shopping cart
ST-OV4- 24DC/ 24DC/1-PRO
2905572
PHOENIX_CONTACT
1
Plug-in power protective circuit solid-state relay, with signal logic, can be plugged into 4-pos. basic terminal blocks, input: 24 V DC, output: short-circuit-proof, 18 - 36 V DC/1 A
Industrial Relays
* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
Thank you for your interest in our products; we hope the delivery time indicated is to your convenience.
While the order is being processed you can select the type of shipment that best suits your needs: 24-hour air express, standard 48-72 hour land, etc.
Width | 27 mm |
---|---|
Height | 63.5 mm |
Depth | 114 mm |
Ambient temperature (operation) | 0 °C ... 60 °C |
---|---|
Ambient temperature (storage/transport) | 0 °C ... 70 °C |
Nominal input voltage UN | 24 V DC ± 50% |
---|---|
Switching threshold "0" signal, voltage | 5 V DC |
Switching threshold "1" signal voltage | 8.5 V DC |
Typical input current at UN | 6.5 mA |
Typical response time | 300 µs |
Typical turn-off time | 700 µs |
Status display | Yellow LED |
Operating voltage display | Yellow LED |
Type of protection | Protection against polarity reversal |
Protective circuit/component | Polarity protection diode |
Transmission frequency | 100 Hz |
Output voltage range | 18 V DC ... 36 V DC |
---|---|
Limiting continuous current | 1 A (see derating curve) |
Min. load current | 1 mA |
Current limitation at short-circuits | approx. 25 A |
Voltage drop at max. limiting continuous current | 300 mV |
Output circuit | 3-conductor, ground-referenced |
Indication | Red LED |
Type of protection | Protection against polarity reversal |
Free-wheeling diode | |
Protective circuit/component | Damping diode |
Output voltage range | 5 V DC ... 36 V DC |
Limiting continuous current | 50 mA |
Voltage drop at max. limiting continuous current | ≤ 1.5 V |
Output circuit | 2-wire, floating |
Type of protection | Protection against polarity reversal |
Protective circuit/component | Polarity protection diode |
Test voltage input/output | 2.5 kV AC |
---|---|
Test voltage output/output | 2.5 kV AC |
Mounting position | any |
Assembly instructions | In rows with zero spacing |
Standards/regulations | IEC 60664 |
EN 50178 | |
IEC 62103 | |
Rated surge voltage/insulation | Basic insulation |
Title: | Size: | Type: |
---|---|---|
PDF CATALOG PHOENIX INTERFACE TECHNOLOGY AND SWITCHING DEVICES EN.pdf | 27 Mbytes | |
PHOENIX CONTACT-2905572-ST-OV4- 24DC/ 24DC/1-PRO | 153 Kbytes |
No customer reviews for the moment.
Rating: | |
Name: | |
Email: | |
Subject: | |
Text: | |
Do you recommend this product to buy? | |
Add review |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.