ST-17S1N8A8K02S 1613288 PHOENIX CONTACT Cable connector View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

ST-17S1N8A8K02S 1613288 PHOENIX CONTACT Cable connector

ST-17S1N8A8K02S

1613288

PHOENIX_CONTACT

Product on demand only, returns will not be accepted.

Cable connector

Plug connector. for cables, straight, SPEEDCON lock, M17, number of poles: 17, contact type: Female, shielded: yes, protection index: IP67, cable diameter range: 3.5 mm ... 5.5 mm, number of poles: 17, connection type: Crimped connection, series: ST

Cable connector, straight, SPEEDCON, M17, number of positions: 17, contact connection type: Socket, shielded: yes, degree of protection: IP67, cable diameter range: 3.5 mm ... 5.5 mm, number of positions: 17, connection method: Crimp connection, series: ST, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1242717

More details


Connectors > Circular connector for field assembly (industrial connector)

Field Device Connectors (FDC)

Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT

Total: $28.87
Unit price: $28.87
This price is per unit and is the net value (not including taxes if applicable).

If our price is not the best, please ask us for a quote. Ask for a quotation

Related products

Best sellers

More info



Technical data

Notes
Order information:Order crimp contacts Ø 0.6 mm separately
Safety note
Safety noteWARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
• WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
• WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
• The products are suitable for applications in plant, controller, and electrical device engineering.
• When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
• Assembled products may not be manipulated or improperly opened.
• Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
• When using the product in direct connection with third-party manufacturers, the user is responsible.
• For operating voltages > 50 V AC, conductive connector housings must be grounded
• Ensure that the protective or functional ground has been properly connected.
• VDE 0100/1.97 § 411.1.3.2 and DIN EN 60 204/11.98 § 14.1.3 are applicable when combining several circuits in a cable and/or connector
• Only use tools recommended by Phoenix Contact
• The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product.
• Operate the connector only when it is fully plugged in and interlocked.
• Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
• Observe the minimum bending radius of the cable. Lay the cable without twisting it.
• The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12).

Product properties
Product typeCircular connector (cable-side)
SeriesST
ApplicationFeedback, signal
Signal
Number of positions17
Connection profile17
Shieldedyes
CodingN
Thread typeM17
Data management status
Article revision13

Material specifications
Seal materialFPM
Housing materialMetal

Connection data
Conductor connection
Connection methodCrimp connection

Electrical properties
Contact
Contact diameter0.6 mm
Max. current3.6 A
Nominal voltage UN48 V AC 74 V DC
Overvoltage categoryIII
Degree of pollution3
Rated surge voltage1.5 kV

Connector
Typestraight
Direction of rotationStandard
Connection 1
Head designSocket

Cable/line
External cable diameter3.5 mm ... 5.5 mm

Environmental and real-life conditions
Ambient conditions
Degree of protectionIP67
Ambient temperature (operation)-40 °C ... 125 °C
Altitude3000 m

ETIM for 1613288 Connectors (EC002635)
Feature Name Feature Value
Contact type (EF001587) Other
Number of data contacts (EF012232) 0
Number of power contacts (EF012216) 0
Number of control contacts (EF012217) 17
Ambient temperature (EF002386) -40 °C
Rated voltage (EF000228) 48 V
Type of electric connection (EF003961) Crimp connection
Type of locking (EF000208) Other
With protective conductor (EF007468) No
Degree of protection (IP), mounted (EF007466) IP67
Screened (EF000881) Yes
With status indication (EF001602) No

Datasheet - PDF

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.