No products
Product successfully added to your shopping cart
View larger
CABLE-D-37SUB/M/OE/0,25/S/2,0M 2926603 PHOENIX CONTACT Cable
CABLE-D-37SUB/M/OE/0,25/S/2,0M
2926603
PHOENIX_CONTACT
Cable
Shielded ready-made round cable; Connection 1: Single conductors (37-poles) (The conductors are labeled and equipped with ferrules. The braided screen protrudes from the separate cable end.); Connection 2: D-SUB Plug (1x 37-pole); Cable length: 2 m
Assembled shielded round cable; connection 1: Single wires (37-position) (The wires are marked and fitted with ferrules. The braided shield is routed to a separate cable end.); connection 2: D-SUB pin strip (1x 37-position); cable length: 2 m
PLC's > PLC connection cable
INTERFACE Components (IF)
Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
Related products
▲Best sellers
▲More info
▲| Product type | System cable |
| Data management status | |
| Article revision | 04 |
| Ambient conditions | |
| Degree of protection | IP20 |
| Degree of protection (Installation location) | ≥ IP54 (Installation location) |
| Ambient temperature (operation) | -40 °C ... 70 °C (fixed installation) |
| -10 °C ... 70 °C (flexible installation) | |
| Ambient temperature (storage/transport) | -40 °C ... 80 °C |
| Altitude | ≤ 2000 m |
| Operating voltage (AC) | ≤ 30 V AC |
| Operating voltage (DC) | ≤ 60 V DC |
| Nominal operating mode | 100% operating factor |
| Current (Per path) | ≤ 2 A (Uncoiled, see derating) |
| Cable length | 2 m |
| 37X0.25 [PVC] | |
| UL AWM Style | 2464/1061 |
| Number of positions | 37 |
| Shielded | yes |
| Cable type | 37X0.25 [PVC] |
| Conductor type | Assembled shielded round cable |
| Conductor structure signal line | 14x 0.15 mm |
| AWG signal line | 24 |
| Conductor cross section | 37x 0.25 mm² |
| Wire diameter incl. insulation | 1.2 mm ±0.05 mm |
| External cable diameter | 10.80 mm ±0.5 mm |
| Outer sheath, material | Semi-rigid PVC |
| External sheath, color | gray |
| Conductor material | Bare Cu litz wires |
| Cable resistance | ≤ 80 Ω/km (at 20 °C) |
| Insulation resistance | ≥ 20 MΩ*km (at 20 °C) |
| Smallest bending radius, fixed installation | 90 mm |
| Smallest bending radius, movable installation | 170 mm |
| Dynamic load capacity (bending) | Max. bending cycles: 5000 (at a radius of ≥ 15x outside diameter) |
| Halogen-free | no |
| Flame resistance | IEC 60332-1-2 (raw cable) |
| VDE 0842, Part 332-1-2 (raw cable) | |
| IEC 60332-3-22 (raw cable) | |
| UL VW-1 | |
| CSA FT-1 | |
| Resistance to oil | can withstand occasional splashes (raw cable) |
| Color code | |
| white | D-SUB37 (1) = () |
| brown | D-SUB37 (2) = () |
| green | D-SUB37 (3) = () |
| yellow | D-SUB37 (4) = () |
| gray | D-SUB37 (5) = () |
| pink | D-SUB37 (6) = () |
| blue | D-SUB37 (7) = () |
| red | D-SUB37 (8) = () |
| black | D-SUB37 (9) = () |
| violet | D-SUB37 (10) = () |
| gray-pink | D-SUB37 (11) = () |
| red-blue | D-SUB37 (12) = () |
| white-green | D-SUB37 (13) = () |
| brown-green | D-SUB37 (14) = () |
| white-yellow | D-SUB37 (15) = () |
| yellow-brown | D-SUB37 (16) = () |
| white-gray | D-SUB37 (17) = () |
| gray-brown | D-SUB37 (18) = () |
| white-pink | D-SUB37 (19) = () |
| pink-brown | D-SUB37 (20) = () |
| white-blue | D-SUB37 (21) = () |
| brown-blue | D-SUB37 (22) = () |
| white-red | D-SUB37 (23) = () |
| brown-red | D-SUB37 (24) = () |
| white-black | D-SUB37 (25) = () |
| brown-black | D-SUB37 (26) = () |
| gray-green | D-SUB37 (27) = () |
| yellow-gray | D-SUB37 (28) = () |
| pink-green | D-SUB37 (29) = () |
| yellow-pink | D-SUB37 (30) = () |
| green-blue | D-SUB37 (31) = () |
| yellow-blue | D-SUB37 (32) = () |
| green-red | D-SUB37 (33) = () |
| yellow-red | D-SUB37 (34) = () |
| green-black | D-SUB37 (35) = () |
| yellow-black | D-SUB37 (36) = () |
| gray-blue | D-SUB37 (37) = () |
| Connection 1 | |
| Connection method | Single wires |
| Stripping length (Sheath) | 150 mm |
| Number of positions | 37 |
| Note | The wires are marked and fitted with ferrules. The braided shield is routed to a separate cable end. |
| Connection 2 | |
| Connection in acc. with standard | IEC 60807-2 |
| DIN 41652 | |
| Connection method | D-SUB pin strip |
| Screw thread | UNC 4-40 |
| Number of connections | 1 |
| Number of positions | 37 |
| Tightening torque | 0.2 Nm |
| Insertion/withdrawal cycles | > 200 |
| Pitch | 2.77 mm |
| Notes on operation | For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met. |
Datasheet - PDF
▲| Title: | Size: | Type: |
|---|---|---|
| PDF CATALOG PHOENIX INTERFACE TECHNOLOGY AND SWITCHING DEVICES EN.pdf | 29 Mbytes |
|
| PHOENIX CONTACT-2926603-CABLE-D-37SUB/M/OE/0,25/S/2,0M | 104 Kbytes |
|
Reviews (0) ▲
No customer reviews for the moment.
| Rating: |
|
| Name: | |
| Email: | |
| Subject: | |
| Text: | |
| Do you recommend this product to buy? | |
|
|
|
| Add review | |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.