PHOENIX CONTACT  SACC-DSI-M12FSS-4CON-M16/2,5PE 1051350 - Image 1

Images are for illustrative purposes only. Please refer to data sheet for details.

SACC-DSI-M12FSS-4CON-M16/2,5PE 1051350 PHOENIX CONTACT Flush-type connector, Power, 4-position, Socket, M12,..

Reference: SACC-DSI-M12FSS-4CON-M16/2,5PE

Code: 1051350

Manufacturer: PHOENIX CONTACT

Product on demand only, returns will not be accepted.

Description:

Flush-type connector, Power, 4-position, Socket, M12, S power, Rear mounting, M16 x 1.5, Individual wires, UL/cUL stranded hook-up wire
Conect. plug. to be apar. Wall Poster., Power, 4-Pole, Connecting Female, M12, S - Power, Rear Mount, M16 x 1.5, Single Stranded Wires, UL/cUL Switching Twisted Wire, RoHS II Alternative Product Without Exception 6c (Pb< 0.1%) 1238203

Categories:

  • Connectors > Circular connector, mounting (with cable)
  • PHOENIX CONTACT > Field Device Connectors (FDC)

Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX CONTACT

  • More Info
  • ETIM
  • Reviews
Guarantee, repair and return.

* This article may be obsolete. Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

LAST VIEWED

MORE INFO

Key Commercial Data

Orderkey1051350
Packing unit1
GTIN4055626673424
Custom tariff number85444290

Drawings



Dimensional drawing

Dimensional drawing
M12 flush-type socket

Circuit diagram

Circuit diagram
Contact assignment of the M12 socket



Schematic diagram

Schematic diagram
Pin assignment of M12 socket, 4-pos., S-coded, socket side view

Back to top

Dimensions

Fixed cable length2.5
Back to top

Ambient conditions

Ambient temperature (operation)-25 ... -85 (Plug / socket)
Back to top

General

Standards/regulationsM12 connector In line with
DesignPin
Tightening torque nut3 Nm ... 4 Nm (M12 connector)
Insertion/withdrawal cycles> 100
Overvoltage categoryIII
Mounting typeRear mounting
CodingS power
Thread typeM16 x 1.5
Cable cross section1.31
AWG signal line16
Rated surge voltage6 kV AC
Degree of pollution3
Degree of protectionIP67
Number of positions4
Current12 A
Voltage630 V
Back to top

Material

Contact materialCuZn
Contact surface materialAu
Flammability rating according to UL 94V0
Back to top

Connection data

Connection methodIndividual wires
Contact resistance with connected conductor≤ 3 mΩ
Cable typeUL/cUL stranded hook-up wire
Back to top

Standards and Regulations

Standards/specificationsM12 connector In line with
Flame resistancein acc. to UL 1581 VW1
Halogen-freeyes
Flammability rating according to UL 94V0
Safety noteWARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
• WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
• WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
• The products are suitable for applications in plant, controller, and electrical device engineering.
• When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
• Assembled products may not be manipulated or improperly opened.
• Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
• When using the product in direct connection with third-party manufacturers, the user is responsible.
• For operating voltages > 50 V AC, conductive connector housings must be grounded
• Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
• Observe the corresponding technical data. You will find information:
o On the product
o On the packing label
o In the supplied documentation
o Online at phoenixcontact.com/products under the product
• Only use tools recommended by Phoenix Contact
• Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory section of the product at phoenixcontact.com/products
• Ensure that the protective or functional ground has been properly connected.
• VDE 0100/1.97 § 411.1.3.2 and DIN EN 60 204/11.98 § 14.1.3 are applicable when combining several circuits in a cable and/or connector
• The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12).
Back to top

Environmental Product Compliance

REACh SVHCLead 7439-92-1
China RoHSEnvironmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”
Back to top

Classifications

eCl@ss

eCl@ss 10.0.127440102
eCl@ss 8.027440103
eCl@ss 9.027440102
Back to top

ETIM

ETIM 5.0EC002061
ETIM 6.0EC002061
Back to top

ETIM for 1051350 Connectors (EC003570)

Feature nameCable length (EF000536)
Feature value2.5 mm
Feature nameType of plug-in contact, outer side (EF005528)
Feature valueNone
Feature nameMounting method (EF000003)
Feature valueBack wall mounting
Feature nameHousing material (EF001596)
Feature valueOther
Feature nameMaterial core insulation (EF000061)
Feature valueOther
Feature nameMaterial of contact surface (EF004020)
Feature valueOther
Feature nameInflammability class of insulation material according to UL94 (EF002521)
Feature valueV0
Feature nameAmbient temperature (EF002386)
Feature value85 °C
Feature nameOperating temperature (EF002393)
Feature value-25 °C
Feature nameRated voltage (EF000228)
Feature value630 V
Feature nameWith shield connection (EF002535)
Feature valueNo
Feature nameScrew-in thread (EF012303)
Feature valueM12
Feature nameCore cross section (EF000018)
Feature value1.31 mm²
Feature nameMin. number of insertion cycles (EF012212)
Feature value100
Feature nameDegree of protection (IP), mounted (EF007466)
Feature valueOther

DATASHEET - PDF

Title
Size
Type

Latest Customer Reviews

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.