PHOENIX CONTACT  PR1-RSP3-LDP-24DC/2X21 2834562 - Image 1

Images are for illustrative purposes only. Please refer to data sheet for details.

PR1-RSP3-LDP-24DC/2X21 2834562 PHOENIX CONTACT Relay Module

Reference: PR1-RSP3-LDP-24DC/2X21

Code: 2834562

Manufacturer: PHOENIX CONTACT

Description:

Relay Module
Pre-assembled relay modules with spring-cage connection, consisting of: relay base, power contact relay, plug-in display/interference suppression module, and retaining bracket. Input voltage: 24 V DC, 2 changeover contacts, 8 A

Categories:

  • PHOENIX CONTACT > Industrial Relays

Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX CONTACT

  • More Info
  • PDF
  • Reviews
Guarantee, repair and return.

* This article may be obsolete. Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

LAST VIEWED

MORE INFO

Technical data

Product properties
Product typeRelay Module
ApplicationUniversal
Operating mode100% operating factor
Mechanical service life3x 107cycles
Data management status
Date of last data management21.05.2024
Insulation characteristics
Overvoltage categoryIII
Pollution degree3

Electrical properties
Service life electricalsee diagram
Maximum power dissipation for nominal condition0.46 W
Test voltage (Winding/contact)4 kV (50 Hz, 1 min., winding/contact)
Test voltage (Contact/contact)2.5 kV (50 Hz, 1 min., contact/contact)

Input data
Coil side
Nominal input voltage UN24 V DC
Input voltage range15.6 V DC ... 59.5 V DC
Drive and functionmonostable
Typical input current at UN19 mA
Typical response time8 ms
Typical release time10 ms
Protective circuitFreewheeling diode
Operating voltage displayYellow LED

Output data
Switching
Contact switching type2 changeover contacts
Type of switch contactSingle contact
Contact materialAgNi
Maximum switching voltage250 V AC/DC
Minimum switching voltage5 V (at 10 mA)
Limiting continuous current8 A
Maximum inrush current15 A (300 ms)
Min. switching current10 mA (At 5 V)
Interrupting rating (ohmic load) max.2000 W (for 250 V AC)
44 W (at 110 V DC)
60 W (at 220 V DC)
190 W (at 24 V DC)
at 440 V AC
85 W (at 48 V DC)
60 W (at 60 V DC)
Switching capacity2 A (at 24 V, DC13)
0.2 A (at 250 V, DC13)
3 A (at 24 V, AC15)
3 A (at 120 V, AC15)
3 A (at 250 V, AC15)

Connection data
Coil side
Connection methodSpring-cage connection
Stripping length10 mm
Conductor cross section rigid0.2 mm² ... 1.5 mm²
Conductor cross section flexible0.2 mm² ... 1.5 mm²
Conductor cross section AWG24 ... 16
Contact side
Connection methodSpring-cage connection
Stripping length10 mm
Conductor cross section rigid0.2 mm² ... 1.5 mm²
Conductor cross section flexible0.2 mm² ... 1.5 mm²
Conductor cross section AWG24 ... 16

Dimensions
Width16 mm
Height97 mm
Depth72 mm

Material specifications
Colorgreen (RAL 6021)

Environmental and real-life conditions
Ambient conditions
Ambient temperature (operation)-25 °C ... 60 °C
Ambient temperature (storage/transport)-25 °C ... 85 °C

Standards and regulations
Standards/regulationsIEC 60664
EN 50178

Mounting
Mounting typeDIN rail mounting
Assembly notein rows with zero spacing
Mounting positionany

Latest Customer Reviews

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.