Sign in
PHOENIX CONTACT INTERFACE Components (IF)PLC-RPT-60DC/21HC 2900295 PHOENIX CONTACT PLC-INTERFACE for high continuous currents, consisting of PLC-BPT...
PHOENIX CONTACT PLC-RPT-60DC/21HC 2900295 - Image 1

Images are for illustrative purposes only. Please refer to data sheet for details.

PLC-RPT-60DC/21HC 2900295 PHOENIX CONTACT PLC-INTERFACE for high continuous currents, consisting of PLC-BPT...

Reference: PLC-RPT-60DC/21HC

Code: 2900295

Manufacturer: PHOENIX CONTACT

Description:

PLC-INTERFACE for high continuous currents, consisting of PLC-BPT.../21 HC basic terminal block with push-in connection and plug-in miniature relay, for mounting on DIN rail NS 35/7,5, limiting continuous current up to 10 A, 1 PDT, input voltage 60 V DC
PLC-INTERFACE for high constant currents, consisting of PLC-BPT.../21 HC base terminal block with push-in connection and plug-in miniature relay, for mounting on NS 35/7.5 rail, constant current limit up to 10 A, 1 switched contact, input voltage 60 V DC
PLC-INTERFACE, for high permanent currents consisting of PLC-BPT.../21 HC base terminal with push-in connection and miniature plug-in relay, for mounting on NS 35/7.5 mounting rail, permanent limit current up to 10 A, 1 changeover contact, voltages. input 60 V DC

Categories:

  • PHOENIX CONTACT > INTERFACE Components (IF)

Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX CONTACT

  • More Info
  • ETIM
  • PDF
  • Reviews
Guarantee, repair and return.

* This article may be obsolete. Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

MORE INFO

Dimensions

Width14 mm
Height80 mm
Depth94 mm

Ambient conditions

Ambient temperature (operation)-40 °C ... 60 °C
Ambient temperature (storage/transport)-40 °C ... 85 °C

Coil side

Nominal input voltage UN60 V DC
Typical input current at UN10 mA
Typical response time8 ms
Typical release time10 ms
Protective circuitProtection against polarity reversal Polarity protection diode
Free-wheeling diode Damping diode
Operating voltage displayYellow LED
Power dissipation for nominal condition0.6 W

Contact side

Contact type1 PDT
Contact materialAgNi
Maximum switching voltage250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
Minimum switching voltage12 V (at 10 mA)
Min. switching current10 mA (at 12 V)
Maximum inrush current30 A (300 ms)
Limiting continuous current10 A
6 A (value applies to connections 12. If connections 12 are bridged, the normal value applies.)
Interrupting rating (ohmic load) max.240 W (at 24 V DC)
58 W (at 48 V DC)
48 W (at 60 V DC)
50 W (at 110 V DC)
80 W (at 220 V DC)
2500 VA (for 250 V AC)
Interrupting rating (ohmic load) max. bridged144 W (for 24 V DC. Value applies to connections 12. If connections 12 are bridged, the normal value applies.)
1500 VA (for 250 V AC. Value applies to connections 12. If connections 12 are bridged, the normal value applies.)
Switching capacity in acc. with DIN VDE 0660/IEC 609472 A (at 24 V, DC13)
0.2 A (at 110 V, DC13)
0.2 A (at 250 V, DC13)
6 A (at 24 V, AC15)
6 A (at 120 V, AC15)
6 A (at 250 V, AC15)

General

Operating mode100% operating factor
Degree of protectionRT II (Relay)
Mechanical service life3 x 107cycles
Flammability rating according to UL 94V0
DesignationStandards/regulations
Standards/regulationsIEC 60664
EN 50178
IEC 62103
Rated surge voltage/insulation6 kV / Safe isolation, increased insulation
Pollution degree2
Overvoltage categoryIII
Mounting positionany
Assembly instructionsIn rows with zero spacing

Connection data input side

Connection nameCoil side
Connection methodPush-in connection
Stripping length8 mm
Conductor cross section solid0.14 mm² ... 2.5 mm²
Conductor cross section flexible0.14 mm² ... 2.5 mm²
Conductor cross section AWG26 ... 14

ETIM for 2900295 Relays (EC001437)

Feature nameType of electric connection (EF003961)
Feature valueOther
Feature nameComplete with socket (EF003359)
Feature valueYes
Feature nameWith detachable clamps (EF003340)
Feature valueNo
Feature nameWith LED indication (EF005950)
Feature valueYes
Feature nameRated control supply voltage DC (EF003980)
Feature value51 V
Feature nameVoltage type for actuating (EF008242)
Feature valueDC
Feature nameDrive, polarization (EF003355)
Feature valuePolarized
Feature nameDrive, switching attitude (EF003356)
Feature valueMono stable
Feature nameNumber of contacts as normally closed contact (EF008255)
Feature value0
Feature nameNumber of contacts as normally open contact (EF008256)
Feature value0
Feature nameNumber of contacts as change-over contact (EF008257)
Feature value1
Feature nameType of switch contact (EF003358)
Feature valueSingle contact
Feature nameWith forced-guided contacts (EF003357)
Feature valueNo
Feature nameMaterial of contact insert (EF008521)
Feature valueOther
Feature nameMaterial of contact surface (EF004020)
Feature valueUntreated
Feature nameNominal current (EF000001)
Feature value0.01 A
Feature nameDegree of protection (IP) (EF005474)
Feature valueIP20
Feature nameWidth (EF000008)
Feature value14 mm
Feature nameHeight (EF000040)
Feature value80 mm
Feature nameDepth (EF000049)
Feature value94 mm

DATASHEET - PDF

Title
Size
Type
PHOENIX CONTACT-2900295-PLC-RPT- 60DC/21HC
161 Kbytes
PDF CATALOG PHOENIX INTERFACE TECHNOLOGY AND SWITCHING DEVICES EN
29 Mbytes

Latest Customer Reviews

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.